Aspect of Wrath Posted September 1, 2018 Share Posted September 1, 2018 Updated settings for xr500 and R2 1/2/2022 My setup Monitor: benq ex2510 Console: Ps5 control: SCUF with metal paddle Bell modem router Settings: (skip to netduma settings if your not with this ISP) ISP: Bell Canada. Bell homehub 3000 settings: 1. Factory reset homehub 3000 to wipe existing pppoe credentials off HH3000 2.type in 192.168.2.1 on a web browser to login to bell 3. disable wifi on HH3000 and disable WPS, upnp, sip alg, DLNA, and everything else but(leave DHCP enabled its for tv) 4. plug your own router's WAN to any of the HH3000's Lan 5. Configure PPPOE on the Netduma xr500 or the netduma R2, go to settings and internet setup. change to PPPOE and input Bell User and pass (user starts with b1) and save. NETDUMA settings: Geo Filter device: Add console, and use the correct profile for whatever game you play(keep lowering the distance if you find games laggy) Anti bufferbloat xr500: Set correct internet speed, set to when high priority is detected. For bufferbloat lower % for download by 10 until connection benchmark test says its stable, then do the same with upload. Anti bufferbloat R2: use auto bufferbloat setup Bandwidth allocation: Share excess enabled on both download and upload and give your console 30% download and 30% upload or 90% both(best). The other way is to set badwidth allocation to applications and give gaming 90%. Traffic prioritization: Keep dumaOS classified games checked(you do not have to manually prioritize your console) OR you can disable DUMAOS classified games, then click on device(ps5) and set as games console. Xr500 Wan setup: Disable port scan checked DMZ: use on console only not pc Respond to ping unchecked Disable igmp proxying unchecked Mtu Leave it alone Nat filtering Open Disable SIP ALG checked R2 wan setup: disable ipv6 and everything else in that page. Advanced settings UPNP: enabled(If you are using than 2 consoles and you find that both do not have open Nat, set Nat filtering to open)If UPNP is not working disable it and use portforward or default dmz server under WAN. Edit: setting NAT to open reduces lag just leave it open. Lan setup: put consoles IP under address reservation. Settings USB storage: uncheck enable media server. Ps5 Settings: Resolution: automatic RGB: Automatic for tv, rgb full for monitor(monitor has to be set to 0-255 on color settings for full and 16-235 for limited). HDR: off Deep color: off Display area: smallest System settings: only thing checked is limit number of items on screen rest unchecked Ps5 network settings: set auto router will do the rest Monitor Settings: look for game mode on your tv/screen and if you have an option for response time set it to fastest. If you have questions msg me. Wintercabin, Netduma Fraser, thewilloxdiaz and 1 other 4 Link to comment Share on other sites More sharing options...
Netduma Staff Netduma Jack Posted September 5, 2018 Netduma Staff Share Posted September 5, 2018 Awesome gameplay! Link to comment Share on other sites More sharing options...
carl0024 Posted September 26, 2018 Share Posted September 26, 2018 Im assuming you were in a party of 6? Just wondering if you have to be the party leader while you're fiddling around geo filter? do you have geo on regardless someone else in your party is the leader? Link to comment Share on other sites More sharing options...
Aspect of Wrath Posted October 3, 2018 Author Share Posted October 3, 2018 On 9/26/2018 at 3:48 PM, carl0024 said: Im assuming you were in a party of 6? Just wondering if you have to be the party leader while you're fiddling around geo filter? do you have geo on regardless someone else in your party is the leader? you have to be the one searching for a match or else geo filter will not work. carl0024 1 Link to comment Share on other sites More sharing options...
Azlios Posted October 4, 2018 Share Posted October 4, 2018 really sorry, but I don't have the Destiny 2 profile that you are using. edit - my bad seen you have the XR500 using DumaOS and im on the lowly R1 on the old software. Link to comment Share on other sites More sharing options...
Wintercabin Posted October 21, 2018 Share Posted October 21, 2018 am I supposed to do this in spectating mode or filtering mode? Link to comment Share on other sites More sharing options...
Aspect of Wrath Posted October 22, 2018 Author Share Posted October 22, 2018 Filtering mode if you are the host and spectating mode if someone else in your fireteam is going to host. Wintercabin 1 Link to comment Share on other sites More sharing options...
Herr Papa Posted November 3, 2018 Share Posted November 3, 2018 tu joue colonie nooby Link to comment Share on other sites More sharing options...
Kg123 Posted January 2, 2022 Share Posted January 2, 2022 @Aspect of Wrath hi do you have any updated setting or do you still use the same ones Link to comment Share on other sites More sharing options...
Aspect of Wrath Posted January 2, 2022 Author Share Posted January 2, 2022 11 hours ago, Kg123 said: @Aspect of Wrath hi do you have any updated setting or do you still use the same ones Im going to update setups for both xr500 and r2 soon. Link to comment Share on other sites More sharing options...
Rylo Posted January 18, 2022 Share Posted January 18, 2022 Is there any benefits to having IGMP unchecked? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted January 18, 2022 Administrators Share Posted January 18, 2022 3 hours ago, Rylo said: Is there any benefits to having IGMP unchecked? No unlikely you would see any benefit Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now