emma787

Hi Fraser
sorry for the late reply was gaming and testing out things.
No it did not work, also I still connect to different servers outside my custom geo filter.

Hmm it still seems to happen. And the ping is definitely wrong here too as it's definitely not 4ms to me to New York lol (it's 75 ms in game)
P.s. let me know if I should make a new topic to troubleshoot
 

Hey - thanks for the hard work on the new firmware!
Just playing MW3 multiplayer at the minute, and noticed that I'm connected to a New York server even though I have most of Europe selected here on the Geo-filter.
Any ideas if I'm doing something wrong? Thanks!

GeoFilter doesn't work majority of the time it keeps trying to place me on servers outside my radius with every game i play on pc. I also keep losing internet in my house all the time. It's been almost 3-4 months with this router R3 and it's has been NOTHING but headaches! For the LOVE of GOD can we please get an actual update with what's been on the works for the new firmware? I've been nothing,but patience. Please! please! Btw I tried all methods to fix these issues above! I just want a NEW firmware to finally fix the current issues we all been dealing with for the past months!

Why? Its amazing!!! im getting crazy lobbies and dropping multi MGB's with the .41 firmware update. The NETduma router from the r1 to the r3 is not a plug & play item off the shelf you need to dial it in for your gaming environment to get the best experience possible.

Call of Duty®-2024_02_01-00_52_51.mp4

Guys, if you have full gigabit speeds, try Advanced Speeds set to 1000 for both up and down.
Then on Congestion Control Mode, set it to Auto. It will lower your speeds slightly, but the trade off is much more stable ping. Allowing me to achieve A+ from A when it was set to Low Latency Only.
Depending on what you get with Low Latency Only, you might see an improvement to the ping values especially when you set it to Auto.

Even though there's not much reason to having low latency when you're not gaming, it might be great for Home Automation devices to respond to your actions more promptly thanks to having lower ping.



On a side note, 0ms ping for both up and down is now easily achievable at higher speeds than last time where I need to set it a lot lower in CC.

got some active ports now  well done guys not a bad thing to say netduma keep up the good work guys

I never called anyone stupid but thank you for putting words in my mouth. I highly question if you have been in the industry because the only logic lacking is your own. Have you worked with the team to troubleshoot ethernet disconnects? Tried new cables? Used a cable tester to verify? I have seen numerous people complain but not be willing to work with the team on said issues. This is where I take issue with them berating the team that is working diligently to produce a solid product. That is serious ignorance on their part and makes the complaint invalid in my opinion. 
 
You say you are not upset but you're coming at me very aggressively which I do not understand. I brought up enterprise because with your claim of 20+ years of experience and being a certified network engineer, I would think that you would know better to blame the networking device when it is a very small group of people experiencing certain issues. If every person upgraded to .23 and it broke their device and we all had the same issues, I could see it being the code or scripting in the device. If we all had physical disconnect issues, I could see us all having lemons, that is not to say your issue is invalid before you put words in my mouth. You may very much have a physical issue and need a RMA, but you should bring this issue to the team and troubleshoot or bring valid proof of a physical port issue. Wireshark during a session to capture the disconnect would help this issue. 

I am not here to fight with anyone, I am here to help people understand they need to troubleshoot to verify the issue with the team is actually on the device so they can DOCUMENT the issues. I am sorry if my pro-troubleshoot outlook is bothersome to you, but that is how I am. I do not look highly on those who refuse to help themselves. 

A new update is being compiled currently, it'll get tested a little bit more, if everything looks okay I'll allow people to try it out tomorrow. 

It could be the CPU issue potentially causing that, the update which I should be able to provide people tomorrow will fix that

I'm lucky enough to have a dumb ONT Modem for my fiber provider and that links into my UDM Pro for VPN needs currently and then I hang everything else off the R3 that hangs off the UDM. I've had minimal issues and I'm looking forward to testing the new firmware this weekend.

Understand the frustration but @Netduma Frasersaid there was a bug with add blocker which they couldn't release the firmware. Obviously some people might be disappointed but Frasier also said the delay will also allow the team to include some more fixes and have a bigger update. Nobody does what Netduma does so hold on a little and I'm sure it will be worth the wait. 

Good advice regarding the videos, that is most likely it. Reason being the ads are served on the same domain as the video itself so if one is blocked the other will be as well. You could just disable it for his device to see how he gets on. If not what speeds are you getting via WiFi? 
We're looking into UPnP, port forwarding will work instead for the moment.
So with steady ping off the Geo ping and in game ping ready exactly the same?
New firmware is due this week and will have a lot of fixes/improvements so I expect people will be happy once that's dropped.

It's due/scheduled for this week, it'll be a different version to .23

I have always used (see picture) this for all my routers works really good, place it right under the middle even on the lowest setting keeps the router really cold even in the summer.
Amazon about 15 € $ £ all the same 😂

Also my router is also super hot all the time, its sitting on a normal surface.  My CPU usage is always at 100% which is why I have to restart every few hours and Im just hoping this update rolls out before we start burning out our CPUs

Better to catch it now and make it a beefier update than having to do a hotfix later. Thanks for the update good sir!

As above, no need to make new topics/keep asking, once it's ready you'll either see a post on it or I'll be handing it out to people

I suppose this could relate to the other routers, and it would be a good idea, though I would like to see it at least for the R3, given that the router is still finding its feet (not one of me best descriptions).
Is there any patch (upgrade) notes for the new firmware, I know typically that the firmware is upgraded for an issue raised from the community. It would be really useful to be able to see why the new firmware was there without having to troll through loads of messages that may or may not be relevant to you. 

Glad to hear you got it sorted. To answer your question about why it's not showing on the router, it was a firmware made on the last day before the holidays, had there been any major issues with it and we made it available for everyone there would be no one in to fix it for 3 weeks and would be a major disaster. So I just provided it to people manually over the holidays and monitored the feedback. All seems good so I put it up there on the latest. I suspect the team won't want to push it when everyone is expecting new firmware now.

It's very difficult for me to give out ETAs for specific bug fixes, I don't always know specifically what issues devs are working on but Geo-Filter improvements will be coming

I've noticed 100% on CPU0 or CPU2 with next to nothing going on. This seems pretty much consistent. Not sure if this is related or being cause by PPPoE.
 

Bro i am chill and understood the problem. that guy was behaving rude and i always said i trust neduma this guy thinks all are dumb. i am not idiot i just want that nobody waste money for now. not all can afford. about geo location i am saying again and again that this thing is provided in exitlag which costs cheaper this is my point nothing else and this is a fact. the ROI is 0 for now as there cpu is throttling that adds extra 5-6 ms which will get solved in upcoming week or 2. so its a unfinished product & premium pricing are paid for premium products which are fully working with features they are saying. 
 
i dont hate i want solution till then i will raise the problem and suggest not to buy as its already going to be a month and still patches are in que.
thanks for helping me out with my doubts.
market is very competitive wtfast integreted router are providing same as this with less pricing.
 

All issues brought up will be addressed yes, Geo-Filter improvements will be coming

I have tried all the methods and it doesn't work, it's frustrating because in cod if you don't have a good decent ping, you don't kill me. I did better on R2. What happened with R2, it heated up a lot and died and I noticed that R3 heats up too much.