zac115 Posted September 24, 2015 Share Posted September 24, 2015 At this current moment my net Doom is essentially a really expensive paperweight I'm unable to do just about anything I can't see any devices that are connected to my router I can't even turn on the Wi-Fi I've tried doing the update through a update file but it keeps on coming back with exit code 2 and I have a house full of 5 people and they would really like the internet back on this all started when I did a factory reset seeing how there was too many devices on the network. I didn't know who they belong to and I couldn't delete them because there was a Wi-Fi repeater and on the device manager had all these ips on it and it would push the whole screen to the side so therefore I couldn't delete them off the router point is I would really really like for someone to help me with this so I can get my router back up online Link to comment Share on other sites More sharing options...
PharmDawgg Posted September 25, 2015 Share Posted September 25, 2015 Can you please follow these directions and see if it can get you up an going: http://wiki.netduma.com/doku.php?id=unbrick_router Link to comment Share on other sites More sharing options...
Yam Yam Posted September 25, 2015 Share Posted September 25, 2015 May I also add onto Bucks help zac, your wifi password would have been reset also, if you didn't use the default one: netdumar1 You need to know the password you set yourself and input it on the wan option on the Miscellaneous tab , all your devices should connect then. If one of your devices is a windows laptop you can check the wireless config, your password will be there if forgotten Link to comment Share on other sites More sharing options...
Zennon Posted September 25, 2015 Share Posted September 25, 2015 Great advice there, if this fixes or you still have issue's please post back. Link to comment Share on other sites More sharing options...
zac115 Posted September 25, 2015 Author Share Posted September 25, 2015 Thank you for the help @yam yam what I'm trying to say is that I can not turn in the WiFi at all I go into the WiFi settings and hit enabled and also set up the security bandwidth and SSID in the setting for the WiFi but when I hit apply it goes back to disable and I cant get it to stay at enabled. However I will do what buck said after I get off work and see if that works. Will post back with details Link to comment Share on other sites More sharing options...
maxoullc Posted September 25, 2015 Share Posted September 25, 2015 Hi, I'm french, I have problems to find good games in my area, I always land on the bed more than 7000km from home. I feel that my router netduma died, when I received it work well, but after the update such as update 1.03.4 it does not work, I have a better connection when I do not connect my router to my modem netduma. Can you help me please ? thank you a lot Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted September 25, 2015 Administrators Share Posted September 25, 2015 How did you do a factory reset zac? Pushing the button from the back of the router? I would recommend doing it from settings > miscellaneous. Also in future when you can't see to delete which devices/they've all got an IP, do a reboot from settings > miscellaneous. Then go to device manager and you should be able to delete them, no need for factory reset. Hi, I'm french, I have problems to find good games in my area, I always land on the bed more than 7000km from home. I feel that my router netduma died, when I received it work well, but after the update such as update 1.03.4 it does not work, I have a better connection when I do not connect my router to my modem netduma. Can you help me please ? thank you a lot Hey maxoullc, could you start a separate thread for your issue please? If you haven't already please follow http://wiki.netduma.com/doku.php?id=fine_tune_netduma Link to comment Share on other sites More sharing options...
maxoullc Posted September 25, 2015 Share Posted September 25, 2015 How did you do a factory reset zac? Pushing the button from the back of the router? I would recommend doing it from settings > miscellaneous. Also in future when you can't see to delete which devices/they've all got an IP, do a reboot from settings > miscellaneous. Then go to device manager and you should be able to delete them, no need for factory reset. Hey maxoullc, could you start a separate thread for your issue please? If you haven't already please follow http://wiki.netduma.com/doku.php?id=fine_tune_netduma I already follow all your guide I just apply as you ask, but the fact that beug when the game is run. I have retars and I'm never on a host that is in my geofiltre. Logically I will not have to have retars and I should be on french or english servers. So why is not the case ?? thank you my friends Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted September 25, 2015 Administrators Share Posted September 25, 2015 I already follow all your guide I just apply as you ask, but the fact that beug when the game is run. I have retars and I'm never on a host that is in my geofiltre. Logically I will not have to have retars and I should be on french or english servers. So why is not the case ?? thank you my friends Non il est peu probable . Permet de faire programmer un 1 sur 1 et je vais regarder vos paramètres . Message personnel moi et nous pouvons mettre en place Link to comment Share on other sites More sharing options...
zac115 Posted September 26, 2015 Author Share Posted September 26, 2015 So I did what yam yam said but now I can even find my gui in (the command page for the router) and now I'm having to do a ip scan to find it and I still can get the damn thing to work. Link to comment Share on other sites More sharing options...
Zennon Posted September 26, 2015 Share Posted September 26, 2015 If you are trying to connect via wifi the password is now netdumar1. If you still can not connect via a cable then follow the link buck posted Here Link to comment Share on other sites More sharing options...
Netduma Staff Netduma Crossy Posted September 26, 2015 Netduma Staff Share Posted September 26, 2015 So I did what yam yam said but now I can even find my gui in (the command page for the router) and now I'm having to do a ip scan to find it and I still can get the damn thing to work. Try connecting via ethernet to the router. Then follow the instructions here to connect to the dashboard. Link to comment Share on other sites More sharing options...
zac115 Posted September 27, 2015 Author Share Posted September 27, 2015 I'll try this and update when I get off work Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.