wrighty338 Posted August 7, 2020 Share Posted August 7, 2020 Got my R2 this afternoon, managed to get a wired connection going fine. Gone to get wifi going and im getting an exclamation mark on them and "no internet connection" error probably missed something really easy but - anyone offer a quick fix? toggled 2.4/5.0 mirror on/off, tried them both independently, changed the channels they were sat on, changed encryption type, rebooted the modem, cant seem to get anywhere! Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted August 7, 2020 Administrators Share Posted August 7, 2020 Sorry to hear you're having this issue. Where are you seeing the exclamation mark - on the device you're trying to connect wirelessly? Have you connected the antennae to the router? Try this: disable the WiFi completely, apply, reboot then enable it, apply, reboot and see if it works please. Link to comment Share on other sites More sharing options...
wrighty338 Posted August 7, 2020 Author Share Posted August 7, 2020 Yeah so my over the wifi symbol on both iphone and imac - i dont connect wireless from my gaming rig. Yep all antennas are screwed in, il give that a go Fraser thanks Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted August 7, 2020 Administrators Share Posted August 7, 2020 Thanks for the information, let us know how you get on after trying that reboot/disable/enable sequence. Link to comment Share on other sites More sharing options...
jayjrlz Posted August 7, 2020 Share Posted August 7, 2020 I have a similar issue. My main PC is wired and that works nicely. I was able to connect my mobile phone and macbook to the network but I cant access the default gateway address from these two devices. I was unable to connect my samsung smart tv and chromecast to the R2. With the tv and ccast it gives me a connection error right away. Edit: I tried the suggested reboot sequence. Still issues. Link to comment Share on other sites More sharing options...
wrighty338 Posted August 7, 2020 Author Share Posted August 7, 2020 Iv run that through a couple of times Fraser, no joy im afraid. Although the exclamation mark does go away, im not getting any data to my device (airplane mode on, wifi on connected to R2) Just to confirm, i disabled wifi, saved and rebooted r2, re-enabled wifi saved and rebooted r2. Had a quick look through my R1 wireless settings, only difference is encryption WPA-PSK and channel number. Link to comment Share on other sites More sharing options...
RedBull2k Posted August 7, 2020 Share Posted August 7, 2020 Try a lower channel. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted August 7, 2020 Administrators Share Posted August 7, 2020 Thank you both for the information. Try the above suggestion but could you also try seeing if you can gain a connection using the guest WiFi? Also on the specific devices you're using are they set to use automatic network settings or have you set manual settings on them previously? Link to comment Share on other sites More sharing options...
Administrators Netduma Iain Posted August 7, 2020 Administrators Share Posted August 7, 2020 @wrighty338 Can I ask which country you're based as well? As different countries have different channels available to them. That could be part of the issue. If you haven't fixed it by tomorrow I'll go back in the office and personally assist you with the issue Zippy and Netduma Fraser 2 Link to comment Share on other sites More sharing options...
wrighty338 Posted August 7, 2020 Author Share Posted August 7, 2020 Iv attempted changing both 2.4 & 5ghz channels, applying settings, rebooting, and this didnt change anything Iv setup a guest network with a different name and password and i get the same exclamation mark over the wifi symbol and "no internet connection" error Phone is set to automatically assign IP/subnet mask/router - i just turn on wifi put in a password and away it goes usually No biggy, My trusty R1 is right here @Netduma Iain England iv tried a few channels - unless there is a specific channel you want me to try im happy to stay on my R1 this weekend Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted August 7, 2020 Administrators Share Posted August 7, 2020 Thank you for the information. Could you try this please and if that doesn't work Iain can take a look tomorrow. Disable Mirror settings and for the 2.4GHz set channel 1 and apply please, then for 5GHz set channel 36 and apply please. On your devices 'forget' the WiFI connection and then attempt to reconnect again with the password. Link to comment Share on other sites More sharing options...
jayjrlz Posted August 7, 2020 Share Posted August 7, 2020 I think I managed to fix it. I retraced all my steps of the settings I had changed (Geo-Filter, QoS etc.) all the way to the beginning. I tried setting the default values for my network speeds 1000 down / 1000 up (in the beginning I ran the automatic test for the speeds) and after this change the issue was fixed. Don't know if this is just luck but hey give it a shot @wrighty338 if it works for you as well. Netduma Fraser 1 Link to comment Share on other sites More sharing options...
Administrators Netduma Admin Posted August 7, 2020 Administrators Share Posted August 7, 2020 3 minutes ago, jayjrlz said: I think I managed to fix it. I retraced all my steps of the settings I had changed (Geo-Filter, QoS etc.) all the way to the beginning. I tried setting the default values for my network speeds 1000 down / 1000 up (in the beginning I ran the automatic test for the speeds) and after this change the issue was fixed. Don't know if this is just luck but hey give it a shot @wrighty338 if it works for you as well. Well done for fixing it. That’s a weird workaround though. Did you do anything else during that process? E.g. factory reset? Would be great if you could try this too @wrighty338 and let us know if it works. Link to comment Share on other sites More sharing options...
wrighty338 Posted August 7, 2020 Author Share Posted August 7, 2020 Hi all Fraser - i tried that - didnt work either I retraced my steps like @jayjrlz suggested, i had initially turned off QOS under congestion control as i just wanted to get up & running. Turning QOS back on has allowed me to get connections to my wireless devices - is this intentional? I can turn off QOS on my R1 and not lose wifi connectivity. Saved me a few more minutes doing a factory reset anyway! Link to comment Share on other sites More sharing options...
jayjrlz Posted August 7, 2020 Share Posted August 7, 2020 I may have spoken too soon. I did a factory reset yes (actually the first thing I did) but after this the issue still persisted. I took QoS completely off while troubleshooting this more (adding speeds automatically) and it can actually be that one as well. @wrighty338 Is your QoS completely turned off? Edit: A bit late good thing we now know whats causing it. wrighty338 1 Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted August 7, 2020 Administrators Share Posted August 7, 2020 14 minutes ago, wrighty338 said: Hi all Fraser - i tried that - didnt work either I retraced my steps like @jayjrlz suggested, i had initially turned off QOS under congestion control as i just wanted to get up & running. Turning QOS back on has allowed me to get connections to my wireless devices - is this intentional? I can turn off QOS on my R1 and not lose wifi connectivity. Saved me a few more minutes doing a factory reset anyway! That's really strange, if anything disabling QoS would have helped with that issue. Thank you very much for figuring that out, I will let Iain know so he is prepared for this tomorrow as that's definitely something we're keen to get to the bottom of and fix ASAP. 14 minutes ago, jayjrlz said: I may have spoken too soon. I did a factory reset yes (actually the first thing I did) but after this the issue still persisted. I took QoS completely off while troubleshooting this more (adding speeds automatically) and it can actually be that one as well. @wrighty338 Is your QoS completely turned off? Edit: A bit late good thing we now know whats causing it. Sorry just to clarify, are you able to connect wireless devices after disabling QoS? Link to comment Share on other sites More sharing options...
wrighty338 Posted August 7, 2020 Author Share Posted August 7, 2020 @Netduma Fraser Yeah i dont run QOS all the time so i turned it off not really thinking! Always going to be bumps in the road, glad i dont have to swap any more cables or routers around today though lol Netduma Fraser 1 Link to comment Share on other sites More sharing options...
jayjrlz Posted August 7, 2020 Share Posted August 7, 2020 1 hour ago, Netduma Fraser said: Sorry just to clarify, are you able to connect wireless devices after disabling QoS? I'll try my best to clarify. Bear with me since English is not my first language. With QoS off I'm able to connect with my mobile & laptop but I cannot access the router's login page. My TV and chromecast cannot connect at all. With QoS on I can add all the devices -> if I switch Qos off while these devices are already connected some of them still keep the connection running (TV). If I disconnect the TV and try to connect back -> it's not possible until I turn QoS back on. Chromecast's connection is lost as soon as it restarts. Link to comment Share on other sites More sharing options...
Administrators Netduma Admin Posted August 7, 2020 Administrators Share Posted August 7, 2020 Could you both share screenshots of your settings page (when on the wireless tab) and also your QoS page please? Link to comment Share on other sites More sharing options...
jayjrlz Posted August 7, 2020 Share Posted August 7, 2020 15 minutes ago, Netduma Admin said: Could you both share screenshots of your settings page (when on the wireless tab) and also your QoS page please? Disabled the mirroring and renamed the 5 GHz SSID, new password for both networks. 2.4Ghz settings similar. All default here. Speeds set automatically. The router is working fine now with these settings. Problems begin when I check the box for 'Disable QoS'. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted August 7, 2020 Administrators Share Posted August 7, 2020 Thanks for the information, in Settings > LAN > General and Settings > WAN > General could you disable IPv6 in both places please and see if you can establish a connection with WiFi when QoS is both enabled and disabled? Link to comment Share on other sites More sharing options...
wrighty338 Posted August 7, 2020 Author Share Posted August 7, 2020 Link to comment Share on other sites More sharing options...
wrighty338 Posted August 7, 2020 Author Share Posted August 7, 2020 IPV6 off in LAN & WAN QOS on wireless connects fine, with QOS off it does not like it Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted August 7, 2020 Administrators Share Posted August 7, 2020 Thank you very much for trying that and for your patience and assistance with this. Iain will be in touch tomorrow to assist. Link to comment Share on other sites More sharing options...
wrighty338 Posted August 7, 2020 Author Share Posted August 7, 2020 No worries chaps im happy to leave QOS on for now its not causing any issues, all my devices are connecting and iv played Battlefield tonight no issues. Il keep an eye on here tomorrow if anyone needs any futher info Netduma Fraser 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now