RobReapz Posted June 3, 2016 Share Posted June 3, 2016 Just wondering but should all bandwidth control settings be disabled on your network when running PP or does it not make a difference? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted June 8, 2016 Administrators Share Posted June 8, 2016 Keep it all at 100 anti-flood, reset device prio and make sure nothing is using the internet when you're running the plotter. Link to comment Share on other sites More sharing options...
fuzzy clam Posted June 8, 2016 Share Posted June 8, 2016 As Fraser said above,make sure your running PP on a quite network.If you try running it while others are on your network,your gonna have a long frustrating day... Link to comment Share on other sites More sharing options...
RobReapz Posted June 8, 2016 Author Share Posted June 8, 2016 Just checking because i have 2 lots of bandwidth control on my network (my Netduma and my Asus router) and when running PP ONLY at 0.5sec intervals i get roughly 40% PL on both routers but everything else is gd, final destination etc (Already made separate thread about this issue) Any ideas what is causing said PL? does any one else have this issue? Thanks for your time. Link to comment Share on other sites More sharing options...
Dillinger Posted June 8, 2016 Share Posted June 8, 2016 What carrier? Some of the UK guys, mostly Zennon, were talking that a configuration in the BT (I think) backbone that can cause problems. They also have been experiencing bad test cases when pinging Google from the UK, but were seeing better, more accurate readings with Twitter and another site I don't remember. Amazon UK maybe? Link to comment Share on other sites More sharing options...
Zennon Posted June 8, 2016 Share Posted June 8, 2016 Yes twitter.com and bbc.co.uk as 8.8.8.8 is having issues at the moment. Link to comment Share on other sites More sharing options...
RobReapz Posted June 8, 2016 Author Share Posted June 8, 2016 Im with plusnet so pretty much BT. Yeh i know about the google issue, think i brought it up in a thread I just want to make sure i havent got a prob on my setup. i have upgraded all my cables btw. like i said i am only getting packet loss (just on my routers) when running PP on 0.5sec speed intervals. Everything else is as it should be when testing normally. any hardware components i could look at? modem or faceplate maybe? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted June 10, 2016 Administrators Share Posted June 10, 2016 Can you run the tests a little slower than that and see if you experience the same please. Link to comment Share on other sites More sharing options...
ColonicBoom Posted June 10, 2016 Share Posted June 10, 2016 Can you run the tests a little slower than that and see if you experience the same please. I found that at smaller intervals I saw packet loss sometimes but never at 2 second intervals - perhaps a ping plotter bug Link to comment Share on other sites More sharing options...
RobReapz Posted June 10, 2016 Author Share Posted June 10, 2016 Guys i appreciate the replies but please read my posts carefully as i dont want to waste your time or mine, not everybody on here needs to be babysat lol. When i run PP on default i DONT get any packet loss its ONLY when i run PP at 0.5sec intervals that this issue arises. If this is nothing to worry about then great problem solved. Link to comment Share on other sites More sharing options...
Zennon Posted June 10, 2016 Share Posted June 10, 2016 Guys i appreciate the replies but please read my posts carefully as i dont want to waste your time or mine, not everybody on here needs to be babysat lol. When i run PP on default i DONT get any packet loss its ONLY when i run PP at 0.5sec intervals that this issue arises. If this is nothing to worry about then great problem solved. You have answered your own question , no more sitting needed here. Link to comment Share on other sites More sharing options...
ColonicBoom Posted June 10, 2016 Share Posted June 10, 2016 Guys i appreciate the replies but please read my posts carefully as i dont want to waste your time or mine, not everybody on here needs to be babysat lol. When i run PP on default i DONT get any packet loss its ONLY when i run PP at 0.5sec intervals that this issue arises. If this is nothing to worry about then great problem solved. I already told you that I see packet loss when set to smaller intervals but not at two second intervals. Please read my replies carefully Link to comment Share on other sites More sharing options...
RobReapz Posted June 10, 2016 Author Share Posted June 10, 2016 I already told you that I see packet loss when set to smaller intervals but not at two second intervals. Please read my replies carefully That still wasnt an answer to my question tho all feedback much appreciated tho boys cheers Link to comment Share on other sites More sharing options...
RobReapz Posted June 10, 2016 Author Share Posted June 10, 2016 You have answered your own question , no more sitting needed here. Thats all i wanted someone to say in the first place lol cheers Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.