.gif.09c9795f713c10c309d68122b089d26c.gif)
DARKNESS
-
Posts
2381 -
Joined
-
Days Won
19
Posts posted by DARKNESS
-
-
@LuisAponteYou can try changing bands etc but I do think the range isn't as good something I did notice compared to my XR1000 so that might be a problem however you can use your XR as an AP so there's that as an altenrative...
-
@Netduma FraserNetwork Activity failing to show anything I checked several devices OS + App show the same result am sure your already aware of it the fix is rebooting the router to add when doing so it re-enables speed test bypass even though it was originally disabled. I'll test the latest FW if available as well....
-
-
@lukaszI am not affiliated with netduma but from my testing this is what causes the loop to happen something that was being tested on the R2 and never really finalized so you could say it was rushed in a way and so it works for certain users and for others it doesn't something that you can check if you have access to the R2 early access forum.
In short yes you will lose access to the core function if possible I would do the setup as quickly as you can and as for the vpn problem I can't help you there you'll have to wait for fraser.
-
@lukaszIt something related to the way Smart QOS/SMART BOOST works which causes the loop if your able to access the UI disable it and see if it works properly
-
@grinch33If that doesn't work you'll have to wait till fraser's back though were able to get access?
-
@graywayWell that good to hear sometimes the UI will do a boot/cycle all features and so you won't have access to it something that need to be improved upon as of currently though it typically takes about a minute to initialize. It happens typically every time you log in however I think it based on a 2-3 hour interval.
-
@grinch33So your basically stuck try doing a hard reset and booting into the interference as quickly as you can without any other connectiosn except your device I would also recommend being connected through lan preferably.
-
@graywaySo the internet works you just can't access the UI correct? If so try using incognito or clearing the cache
-
@graywayIf your getting 404 most likely means your not even connected to the network are you doing the setup wireless or hardwired?
-
@grinch33Did you clear the cache? I would preferably use incognito to access the UI
-
@ThatDisguiseI smell bot in chat 😂 to add the R3 HVPN isn't available it being worked upon and no they do not give bot lobbies you can look deep and maybe there is though I ain't a loser to test that myself so there's that as for disguising your IP from being ddos and changing regions yes it works on the PlayStation.
-
@Jeofel08Possibily though like any other platform there are different ports and it is based on traffic though I don't think there that far apart as they have all the same info it just on different captures you can see different ports being used well whenever they update the DPI I'll test it though it been quite a while since the last update about 2 months ago and the XR1000 still pending to get it list updated since it been outdated for ages.
-
@MariusZHP4Did you reboot the modem to refresh the IP will connected to the router?
-
@Jeofel08Took me quite bit retarded mac didn't want to let my android connect to the wifi so I had to just use an iPhone connected straight to it in short lan connected method that only works on IOS so I only got one capture for android though looking at the udp logs there pretty similar regardless.
-
- Application name: Mobile Legends: Bang Bang
- Device type used for capture: MAC OS/Android+IOS
- Any other comments: New game for the DPI Engine 3 captures on IOS and 1 in android
Mobile Legends #1 IOS.pcapng Mobile Legends #2 IOS.pcapng Mobile Legends #3 IOS.pcapng Mobile Legends #1 Android.pcapng
-
@Authentik06That normal behavior it just means there's no update available if I am correct
-
@Jeofel08Yeah just give me a couple of hours just to add I am just the capturer-assistant and not affiliated with netduma and there are certain games that have encrypted traffic and that means they just can't be added but having a capture typically means it can be added/has higher chance if @Netduma Fraseror@Netduma Fraserlike to clarify certain information your welcome to do so.
-
- Application name: PUBG Mobile
- Device type used for capture: MAC OS/Android
- Any other comments: New game for the DPI Engine adding the capture because certain users keep requesting for it to be added
PUBG MOBILE #1.pcapng PUBG MOBILE #2 pcapng.pcapng PUBG MOBILE #3 pcapng.pcapng
- Netduma Fraser and ranu007
-
.png)
1
-
1
-
@BigMarkNo except if you classify them by checking the IP of each device manually in the household
-
-
-
@TorkildThe thing is it might show up fine for a bit but then it'll come back again
@Netduma FraserI'll have to double check with the other router which I never did if this an OS issues etc
-
 Do the following:
- Set CC to Always Under Ping Optimizer on advanced settings
- Disable GeoLatency
- Set UP CC Properly
- Have Gaming as #1 under SMART BOOST
- Disable Steady Ping if preferred just read what it does specifically and choose whether to keep enabled or disabled
Netduma language selection
in Netduma R3 Support
Posted
@NunzioFirefox is the way to go the best one is this one if your a foreigner as there no official support for different languages that am aware of at the moment though they could just integrate it using google translate to save on cost but they have not so who knows if they ever add other languages....
https://addons.mozilla.org/en-US/firefox/addon/traduzir-paginas-web/?utm_source=addons.mozilla.org&utm_medium=referral&utm_content=homepage-collection-featured