Krush

Another thing, adjust your speed manually and not automatically via the speed test integrated into netduma...!

just in case, if you have a realtek ethernet card integrated into your CM, changing the drivers may help!

Take the test on the ookla W10/11 app in ipv4 By selecting an optimized server, you will get your maximum speed!

In this case it is normal to have lower speeds in ipv4, because the ABB was set... (cursors on always) It's just that ipv6 is not taken into account because it is passtrought (on the WAN) and bypasses the QOS etc functionality that is on the LAN!

Hi, Take the test by disabling ipv6 !

This is the problem with HFC connections, ISPs have succeeded in increasing speeds to the detriment of line stability!

This may be the problem, back to automatic! Also restart the main router! There is bound to be something blocking access, you have to proceed step by step, turn off and restart the devices 1 by 1, starting with the one that is furthest upstream!

Have you set static ip addresses manually on your PCs (network card)? From memory, the XR changes gateway ip automatically when it is behind a primary router (192.168.1.1 to 10.0.0.1 for exemple)...

Hi ! Maybe by using the XR's gateway ip in the search bar! or by cleaning the cache of your browser...

Is there any reason you no longer have access, the XR is behind a main router (ISP) or other devices? Have you tried restarting all the machines upstream? You are at Free (ISP)! How did you configure your freebox?

Hi ! Did you put a static ip on the ethernet card of your PC during the Flash of the router? You can try by putting in automatic, or via the gateway address of the XR700 to access its configuration page! (HTTP or HTTPS)

Hi ! Do a factory reset and the error will go away...

Are you using the HVPN or have you blocked some servers on the game? I've had this problem before, but it was solved with a simple factory reset! ...10 minutes to reconfigure it to the max...

Pay attention! Nothing new, it's just the game (MW2) finally taking into account the real (direct) round trip ping from the game server to your location without bypassing... I have a ping of 7ms minimum on the game (server in Paris) because all the FR ISPs go through Paris (central core in France), living in Paris I would have a ping close to 1ms... is just pixie dust! Enregistrement 2023-08-06 142757.mp4 To compare on another COD (VG) game with telemetry... Enregistrement 2023-08-06 145021.mp4

I think this has already been asked, duma side! the software being separated. But, I think Netgear won't deal with updates anymore... XR700 no longer built/marketed... (old router) Except maybe a security update, LoL!

Hi ! You will never get more than 950Mbps on a throughput test with a 1Gbps ethernet card or the test is truncated. It may also be limited depending on the CPU of your device used for the test. Regarding the dumaOS Benchmark Test, the lower speeds given compared to that of your ISP connection are due to the test server which is either not optimized, or is degraded due to your ISP's peering. The best solution to connect the different variables of its IP connection remains the Iperf tools...

Hi ! This is purely graphical, setting the max DL speed to 950 Mbps is the max hardware speed on an RJ45 port!

it stings...40... Do the test with a "listed" MAC or netbios device first!

In this case, you will have to manage a network card on your PC or other to keep access to its administration page, the subnet will simply allow you to have faster access to the interface! If I understood correctly your peripherals behind your AP in wifi, are not recognized (noname) automatically on device manger but they are listed on the DHCP of the XR500? You have to restart them so that the netbios is recognized...

Is it an access point connected in RJ45? Can you assign it an ip fix or DHCP on its interface? I found a combination with a manageable switch so that it does not appear in device manager and disrupts the different functionalities! Just assign it the same ip fix outside the DHCP range as a device on your local network, whose ip is fixed! AP works like a switch so is transparent with respect to the router which delivers the ip in DHCP...

It was just to know if the lan switch was not physically blocked at 1 Gbps, which does not seem to be the case with QoS disabled! Let's say I have a 8Gbps DL line (which is the case) using the SFP+ port as Wan, I could download via the XR700 Lan switch on 6 machines at the same time at 110 MB/s, or even aggregate 2 ports Lan for transfers / downloads at 220 MB/s in principle!

Hi ! SmartQoS is not visible on the PC/Desktop view, you will need to use this link to access it: http://192.168.77.1/dumaweb/#smartqos

Hi Because it's still in the beta test phase on the r2!

Hi @e38BimmerFN If you have a connection higher than Gbps... Could you check for me by placing the wan on the SFP+ port and performing 2 simultaneous tests on 2 different machines behind the XR700's integrated rj45 switch? Just to see if the flow is shared or if it can deliver more than one Gbps...

If you want to get the best performance for the game on your PC, just put it in performance mode and choose xmp mode for your RAM! For OC your graphics card, I recommend MSI after burner "Free "and test with 3D mark in demo mode, "also free"! There's nothing to complicate, just take the time! https://store.steampowered.com/app/223850/3DMark/ http://download.msi.com/uti_exe/vga/MSIAfterburnerSetup.zip All the information is given on the internet, just take the time to do the research!