jeanclaudedus Posted August 10, 2020 Posted August 10, 2020 Hello everyone, I'm trying to configure. these 2 routers, if one of them can share. I want to use the SQM of the Edge router and the QOS and Geo-Filter of the XR300 Problem : i don't know how i can connect these 2 routers .... I connect my internet BOX, XR300 and my PS4 to edgerouter X but my Geofilter does not work anymore.... thanks you for your help and configuration...
Sable Posted August 10, 2020 Posted August 10, 2020 30 minutes ago, jeanclaudedus said: Hello everyone, I'm trying to configure. these 2 routers, if one of them can share. I want to use the SQM of the Edge router and the QOS and Geo-Filter of the XR300 Problem : i don't know how i can connect these 2 routers .... I connect my internet BOX, XR300 and my PS4 to edgerouter X but my Geofilter does not work anymore.... thanks you for your help and configuration... ISP modem/router> edge router x> xr300> Console is what you should set up.
Bert Posted August 10, 2020 Posted August 10, 2020 What sable said. Also you should disable QoS on the XR300 if you want to go that way, it serves no purpose as the ER-X takes care of that.
Nalsano_ Posted August 10, 2020 Posted August 10, 2020 7 hours ago, jeanclaudedus said: Bonjour à tous, j'essaye de configurer. ces 2 routeurs, si l'un d'eux peut partager. Je souhaite utiliser le SQM du routeur Edge et le QOS et le Geo-Filter du XR300 Problème: je ne sais pas comment je peux connecter ces 2 routeurs .... Je connecte ma BOX Internet, XR300 et ma PS4 à edgerouter X mais mon Geofilter ne fonctionne plus ... merci pour votre aide et configuration ... Salut utiliser une seule qos est le plus conseillé si tu veut vraiment utiliser la qos du erx desactive la qos du côté du xr300 .. L' erx doit être placé avant le xr300 si tu veux utiliser le geofiltre sans contrainte...
jeanclaudedus Posted August 10, 2020 Author Posted August 10, 2020 10 hours ago, Sable said: Modem / routeur FAI> routeur de périphérie x> xr300> La console est ce que vous devez configurer. It s my configuration Modem/ edg x / xr300 Here are my connections Modem Then I plugged into the edg x: a rj 45 cable from the modem, then I plugged in my ps4 then I plugged in my netduma Qos is disabled on netduma When I go to dumaos, the geofilter no longer works Is it because my ps4 is no longer connected to my netduma because it is connected to the edgerouter x? Thanks for your help
Bert Posted August 10, 2020 Posted August 10, 2020 Are you running it in AP mode? Your XR300 needs to be in router mode and set into the DMZ of your ER-X. In AP mode the Geofilter doesn't work afaik.
Administrators Netduma Fraser Posted August 10, 2020 Administrators Posted August 10, 2020 Yes any devices you want to be controlled by the XR have to be connected to it, either through WiFi or by ethernet.
jeanclaudedus Posted August 10, 2020 Author Posted August 10, 2020 22 minutes ago, Bert said: Are you running it in AP mode? Your XR300 needs to be in router mode and set into the DMZ of your ER-X. In AP mode the Geofilter doesn't work afaik. My XR300 is in router mode yes
jeanclaudedus Posted August 10, 2020 Author Posted August 10, 2020 Then I plugged into the edg x: a rj 45 cable from the modem, then I plugged in my ps4 then I plugged in my netduma Is it good?
dav581005 Posted August 10, 2020 Posted August 10, 2020 Plug the edge router x into isp modem then xr300 into edge x then ps4 into xr300
Nalsano_ Posted August 11, 2020 Posted August 11, 2020 La meilleure solution modem->(Dmz) erx->(Dmz) Xr300-> Ps4 tout t'es appareils devront être connecté au xr300 de cette façon tu pourras avoir la Qos du erx sur ton réseau et bénéficier du geofiltre sur ta ps4 mais comme dit plus haut ne met pas le xr300 en mode ap car il deviendrait obsolète (wifi rien d'autre)
Israeli Falafel Posted August 11, 2020 Posted August 11, 2020 3 hours ago, Locosano said: The best modem solution -> (Dmz) erx -> (Dmz) Xr300-> Ps4 all your devices will have to be connected to the xr300 this way you can have the Qos of the erx on your network and benefit from the geofilter on your ps4 but as said above do not put the xr300 in ap mode because it would become obsolete (wifi nothing else) Check your jitter, most likely that will go up.
jeanclaudedus Posted September 1, 2020 Author Posted September 1, 2020 I despair .... I really cannot configure the edgerouter x and the XR 300 ... yet all the connections are good, connection of the box to the edg X then xr 300 to the edg X (the internet indicator is ok), the ps4 is connected to the netduma ....... but the geofilter still does not work ....... help help
Administrators Netduma Fraser Posted September 1, 2020 Administrators Posted September 1, 2020 48 minutes ago, jeanclaudedus said: I despair .... I really cannot configure the edgerouter x and the XR 300 ... yet all the connections are good, connection of the box to the edg X then xr 300 to the edg X (the internet indicator is ok), the ps4 is connected to the netduma ....... but the geofilter still does not work ....... help help Could you be more specific about what doesn't work with the Geo-Filter?
jeanclaudedus Posted September 1, 2020 Author Posted September 1, 2020 yes, it doesn't work when, it doesn't recognize my place of residence, like when you turn on the dumas OS console off thanks you
Administrators Netduma Fraser Posted September 1, 2020 Administrators Posted September 1, 2020 38 minutes ago, jeanclaudedus said: yes, it doesn't work when, it doesn't recognize my place of residence, like when you turn on the dumas OS console off thanks you It won't do that, you need to select the home location yourself. Does it filter properly?
jeanclaudedus Posted September 2, 2020 Author Posted September 2, 2020 Geofilter works good less edgerouter x but where I connect my XR300 to my edg x, I lost the geofilter...
Administrators Netduma Fraser Posted September 2, 2020 Administrators Posted September 2, 2020 10 hours ago, jeanclaudedus said: Geofilter works good less edgerouter x but where I connect my XR300 to my edg x, I lost the geofilter... I don't follow, could you clarify please?
jeanclaudedus Posted September 2, 2020 Author Posted September 2, 2020 geolfilter no longer works when I plug my xr300 into the edgerouter x my ps4 is plugged into the edgerouter x if I reconnect my xr300 to my box, then the geofilter works again I don't understand why and how I can lose the geofilter? I want to say that the xr300 is well connected to the internet when it is plugged into the edgerouter x ...
blackfirehawk Posted September 2, 2020 Posted September 2, 2020 You need to Plug your ps4 into the xr300.. And the xr 300 into the edgerouter
Administrators Netduma Fraser Posted September 2, 2020 Administrators Posted September 2, 2020 As above, the XR can't see the device if it isn't connected to it.
Administrators Netduma Fraser Posted September 2, 2020 Administrators Posted September 2, 2020 As in you have done that or you will do that?
jeanclaudedus Posted September 3, 2020 Author Posted September 3, 2020 it works ... great a big thank-you on the other hand moderate nat one last question: in my box I put the XR300 or the EDG router x in DMZ? THANKS
Recommended Posts
Archived
This topic is now archived and is closed to further replies.