Jump to content

Upgrading your Netduma R1 to DumaOS from a version lower than 1.03.6


Recommended Posts

  • Administrators
Posted

Thanks. We will try again on Monday.

Posted
On 10/25/2018 at 1:31 PM, Netduma Fraser said:

We could not access your router. Please ensure the R1 WAN IP is in the DMZ of your ISP hub, UPnP & Port forwarding is disabled on your ISP hub and that remote access is ticked on the R1 in settings > miscellaneous.

Tick ‘Allow remote access to Netduma tech support’ -> done
Go to Settings >UPnP and enable the feature if it's not already enabled -> done
Go to Settings > Port Forwarding and remove any rules -> done
Netduma WAN IP manually set to 192.168.100.5 which is also configured as the Huawei router's DMZ address -> done
Port forwarding disable in Huawei router's settings -> done
Try disabling Huawei router's firewall -> done
Port scan 7777 -> FAIL

I'm starting to think that my 4G connection does not support incoming connections at all. Btw, my laptop had no problems connecting to Huawei router in bridge mode (public IP received and internet worked nicely) but Netduma somehow fails.

Is there really no other way to upgrade to latest R1 firmware besides allowing remote access?

  • Administrators
Posted

Would be best if you could call the ISP and see if they will allow that port, otherwise the alternative could potentially brick the router.

  • Administrators
Posted
On 10/26/2018 at 5:05 PM, omni72 said:

Hi - Thanks for the update. The settings had changed from the last time I set them so i'm guessing some of them got reset after I rebooted yesterday. Should be set now:

Port
Status
7777
open (57ms)

Thanks & take care

You're good to go. Please do not reboot before upgrading.

  • Administrators
Posted
14 hours ago, Shymmy1981 said:

I would like the fix for my router to be upgraded.

Thanks.

We could not access your router. Please ensure the R1 WAN IP is in the DMZ of your ISP hub, UPnP & Port forwarding is disabled on your ISP hub and that remote access is ticked on the R1 in settings > miscellaneous.

  • Administrators
Posted

Great thank you, not sure when we'll next be able to check as quite a few things going on at the moment but will check as soon as we can!

  • Administrators
Posted

Thanks Dyllon - are you on the 1.03.3 then? We will need to do this next week as we are moving the fixing machine to the new office. Please bear with us!

Posted
19 hours ago, Netduma Admin said:

Thanks Dyllon - are you on the 1.03.3 then? We will need to do this next week as we are moving the fixing machine to the new office. Please bear with us!

1.03.5m and no problem, i'm patient

  • Administrators
Posted

Thanks - we will try to do this next week.

  • Administrators
Posted

D'accord, merci. Nous confirmerons une fois qu'il est prêt.

Posted

I havent been on the forums for quite a while ( sorry) I have the latest version (or what was the latest version of netduma OS) for a while now. I submitted mt email for testing but ive never gotten any links or anything for downloading the Duma OS beta

  • Administrators
Posted
15 hours ago, bbursley said:

I havent been on the forums for quite a while ( sorry) I have the latest version (or what was the latest version of netduma OS) for a while now. I submitted mt email for testing but ive never gotten any links or anything for downloading the Duma OS beta

Think you posted in the other thread to say you found it. Let us know if not.

Posted
1 hour ago, Netduma Admin said:

Think you posted in the other thread to say you found it. Let us know if not.

I did, I now have Duma OS installed on the R1

  • Administrators
Posted

Good stuff. Hope you're enjoying it.

Posted

I am currently locked out of my router due to the milestone update. The default username and password not working. Any answer for this?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...