MassaDebata85 Posted December 24, 2017 Share Posted December 24, 2017 Hey guys. I been running the edge router x as my main router(i like some of its features) with the netduma plugged into it and my ps4 plugged into the netduma.. If i plug my ps4 into either one individually i get open nat,but with the current setup i am getting moderate.not to mention it took me literally 8 hrs to figure this edge router out and there forum SUCKS. anyway just seeing if any of you guys have any experience with the combo?i have tried disabling upnp2 on the edgemax and enabling it on netduma and vice versa. any info would be greatly apreciated Link to comment Share on other sites More sharing options...
PharmDawgg Posted December 24, 2017 Share Posted December 24, 2017 Ok. What you are going to have to do is make sure the Netduma is plugged into one of the lan ports of the edge router and the the wan port of the R1. The R1 will recognize that it is connected to another router and not a modem. The edgerouter will then issue an ip address to the R1. Leave the dhcp server on in the R1. Let it continue to issue ip addresses. Now everything behind the R1 will have a different ip address.(i.e. your PlayStation) this is ok. Now here’s the difficult part. Somehow you have got to place the R1 in the edgerouter dmz. Which I think is easier said than done on the edgerouter. I had an edgerouter lite and could never figure it out. Link to comment Share on other sites More sharing options...
Sgt-Greco Posted December 24, 2017 Share Posted December 24, 2017 Sounds like double NAT. Check your WAN IP in both separately. If you see a local IP (for example 192.168.x.x) in one of them, then you have two devices performing NAT. Link to comment Share on other sites More sharing options...
MassaDebata85 Posted December 25, 2017 Author Share Posted December 25, 2017 Ok. What you are going to have to do is make sure the Netduma is plugged into one of the lan ports of the edge router and the the wan port of the R1. The R1 will recognize that it is connected to another router and not a modem. The edgerouter will then issue an ip address to the R1. Leave the dhcp server on in the R1. Let it continue to issue ip addresses. Now everything behind the R1 will have a different ip address.(i.e. your PlayStation) this is ok. Now here’s the difficult part. Somehow you have got to place the R1 in the edgerouter dmz. Which I think is easier said than done on the edgerouter. I had an edgerouter lite and could never figure it out. ya you ask them about dmz they talk to you like your a moron Link to comment Share on other sites More sharing options...
MassaDebata85 Posted December 25, 2017 Author Share Posted December 25, 2017 Sounds like double NAT. Check your WAN IP in both separately. If you see a local IP (for example 192.168.x.x) in one of them, then you have two devices performing NAT. no no double nat Link to comment Share on other sites More sharing options...
MassaDebata85 Posted December 25, 2017 Author Share Posted December 25, 2017 and ya thats exactly how i have it hooked up Link to comment Share on other sites More sharing options...
TrayDay Posted December 25, 2017 Share Posted December 25, 2017 Hey guys. I been running the edge router x as my main router(i like some of its features) with the netduma plugged into it and my ps4 plugged into the netduma.. If i plug my ps4 into either one individually i get open nat,but with the current setup i am getting moderate.not to mention it took me literally 8 hrs to figure this edge router out and there forum SUCKS. anyway just seeing if any of you guys have any experience with the combo?i have tried disabling upnp2 on the edgemax and enabling it on netduma and vice versa. any info would be greatly apreciated I had used this to get DMZ setup on multiple connections I had with the ERL. Always worked, Give it a try, https://community.ubnt.com/t5/EdgeMAX/How-to-set-up-DMZ-firewall-rules-for-multiple-public-IPs/m-p/715331/highlight/true#M22960 Link to comment Share on other sites More sharing options...
MassaDebata85 Posted December 25, 2017 Author Share Posted December 25, 2017 I had used this to get DMZ setup on multiple connections I had with the ERL. Always worked, Give it a try, https://community.ubnt.com/t5/EdgeMAX/How-to-set-up-DMZ-firewall-rules-for-multiple-public-IPs/m-p/715331/highlight/true#M22960 hat is wayyyyyyyyy to complicated for me..i apreciate that tho the whole creating new networks thing is out of my league lol it took me 8 hrs to learn how to upnp2..isnt there a way to just open all ports to the netduma on the ip the dhcp gave me?t Link to comment Share on other sites More sharing options...
BIG__DOG Posted December 25, 2017 Share Posted December 25, 2017 I will create a video on how to do this for you but obviously you are gonna have to wait til after boxing day for me to do it as I won't have time over the next 2 days! Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted December 25, 2017 Administrators Share Posted December 25, 2017 hat is wayyyyyyyyy to complicated for me..i apreciate that tho the whole creating new networks thing is out of my league lol it took me 8 hrs to learn how to upnp2..isnt there a way to just open all ports to the netduma on the ip the dhcp gave me?t Just do port forwarding on the edge 1024-65535 TCP/UDP to the IP of the R1 then you should be good. Link to comment Share on other sites More sharing options...
MassaDebata85 Posted December 25, 2017 Author Share Posted December 25, 2017 Sounds like double NAT. Check your WAN IP in both separately. If you see a local IP (for example 192.168.x.x) in one of them, then you have two devices performing NAT. actually i looked again i see a local ip under my netduma wan ip Link to comment Share on other sites More sharing options...
MassaDebata85 Posted December 25, 2017 Author Share Posted December 25, 2017 i apreciate the help guys..im just gonna stick with the user friendly netduma and get rid of the x..even tho dsl reports my bufferbloat didnt move a hair with both running,and i was demolishing people on ww2 lol.thanx again Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted December 26, 2017 Administrators Share Posted December 26, 2017 As your issue has been resolved I'll close this topic. Feel free to open another if needed! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.