Cyber-razgriz Posted September 8, 2016 Share Posted September 8, 2016 I have a 1.03.3 Do I Upgrade? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted September 9, 2016 Author Administrators Share Posted September 9, 2016 On 9/6/2016 at 8:43 PM, duronx2 said: I am on an older version than 103.5 and would like to upgrade, I have confirmed that remote support is enabled, what do I need to do next? In case you need the exact fw version, I am on R1 debug version 1.03.03. We could not access your router. Please ensure the R1 WAN IP is in the DMZ of your ISP hub. UPnP & Port forwarding is disabled on your ISP hub and that remote access is ticked on the R1 in settings > miscellaneous. On 9/8/2016 at 1:24 AM, King0fgames said: Hello! My router is currently running 1.03.3, I think I'm due for an update You're good to go. Please do not reboot before upgrading. On 9/8/2016 at 2:28 PM, Cyber-razgriz said: I have a 1.03.3 Do I Upgrade? You're good to go. Please do not reboot before upgrading. Link to comment Share on other sites More sharing options...
Jurre Posted September 11, 2016 Share Posted September 11, 2016 Hello, I am on 1.03.3 and would like to upgrade. I have remote support checked. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted September 13, 2016 Author Administrators Share Posted September 13, 2016 You're good to go. Please do not reboot before upgrading. Link to comment Share on other sites More sharing options...
jtwrules Posted September 14, 2016 Share Posted September 14, 2016 Hey now. I would like to upgrade from firmware 1.03.3 please. I have remote access ticked. Should I expect an email with instructions or something of the like? Link to comment Share on other sites More sharing options...
duronx2 Posted September 15, 2016 Share Posted September 15, 2016 On 9/9/2016 at 4:52 PM, Netduma Fraser said: We could not access your router. Please ensure the R1 WAN IP is in the DMZ of your ISP hub. UPnP & Port forwarding is disabled on your ISP hub and that remote access is ticked on the R1 in settings > miscellaneous. I am not certain what you are looking for me to do, I have fiber running to my house, and the R1 is the only router I am using. I have some ports forwarded on the R1 for me to connect to my home pc, and I have UPNP on that configured, should I disable those? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted September 15, 2016 Author Administrators Share Posted September 15, 2016 On 9/15/2016 at 5:02 AM, duronx2 said: I am not certain what you are looking for me to do, I have fiber running to my house, and the R1 is the only router I am using. I have some ports forwarded on the R1 for me to connect to my home pc, and I have UPNP on that configured, should I disable those? Can you access the ONT/Modem you're using? If so check for UPnP/port forwarding and disable. Otherwise ensure you only have UPnP OR port forwarding enabled on the duma and disable UPnP forwarding in miscellaneous settings. Link to comment Share on other sites More sharing options...
Mstizzle Posted September 15, 2016 Share Posted September 15, 2016 I have version 103.3 and I would like to upgrade. Please check my router to see if its safe for me to do so. Thank you. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted September 15, 2016 Author Administrators Share Posted September 15, 2016 On 9/14/2016 at 2:10 PM, jtwrules said: Hey now. I would like to upgrade from firmware 1.03.3 please. I have remote access ticked. Should I expect an email with instructions or something of the like? We could not access your router. Please ensure the R1 WAN IP is in the DMZ of your ISP hub. UPnP & Port forwarding is disabled on your ISP hub and that remote access is ticked on the R1 in settings > miscellaneous. On 9/15/2016 at 2:49 PM, Mstizzle said: I have version 103.3 and I would like to upgrade. Please check my router to see if its safe for me to do so. Thank you. You're good to go. Please do not reboot before upgrading. Link to comment Share on other sites More sharing options...
james1987 Posted September 15, 2016 Share Posted September 15, 2016 I have remote support ticked and I want to upgrade I am showing I am running 1.03.3 ty Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted September 16, 2016 Author Administrators Share Posted September 16, 2016 On 9/15/2016 at 11:07 PM, james1987 said: I have remote support ticked and I want to upgrade I am showing I am running 1.03.3 ty We could not access your router. Please ensure the R1 WAN IP is in the DMZ of your ISP hub. UPnP & Port forwarding is disabled on your ISP hub and that remote access is ticked on the R1 in settings > miscellaneous. Link to comment Share on other sites More sharing options...
james1987 Posted September 16, 2016 Share Posted September 16, 2016 hi ive done what u have asked can u proceed again ty Link to comment Share on other sites More sharing options...
duronx2 Posted September 17, 2016 Share Posted September 17, 2016 On 9/15/2016 at 12:26 PM, Netduma Fraser said: Can you access the ONT/Modem you're using? If so check for UPnP/port forwarding and disable. Otherwise ensure you only have UPnP OR port forwarding enabled on the duma and disable UPnP forwarding in miscellaneous settings. I went ahead and disabled the UPNP, I do not have access to the ONT or Modem for my fiber. Link to comment Share on other sites More sharing options...
JackalJake Posted September 18, 2016 Share Posted September 18, 2016 Quote We could not access your router. Please ensure the R1 WAN IP is in the DMZ of your ISP hub. UPnP & Port forwarding is disabled on your ISP hub and that remote access is ticked on the R1 in settings > miscellaneous. Trying this again. R1 debug version 1.03.3 running on rb-951g-2hnd -The R1 WAN IP is set in the DMZ of my ISP modem/router -UPnP & Port forwarding is now disabled in my ISP modem/router -Remote access is checked in the R1 misc settings Thanks Link to comment Share on other sites More sharing options...
kouhaipls Posted September 18, 2016 Share Posted September 18, 2016 I have remote support ticked and I want to upgrade I am showing I am running 1.03.3 Link to comment Share on other sites More sharing options...
thattwopiece Posted September 19, 2016 Share Posted September 19, 2016 hi..I am on an older version and i have remote support ticked i would like to upgrade current version im on : 1.03.4 Link to comment Share on other sites More sharing options...
Tree0wl Posted September 19, 2016 Share Posted September 19, 2016 I have R1 debug version 1.03.3 running on rb-951g-2hnd and would like to upgrade. Can you please log in and work your magic? Thanks Link to comment Share on other sites More sharing options...
jtwrules Posted September 19, 2016 Share Posted September 19, 2016 Thanks for your response. The Netduma is the only router I am using. I saw in another post the same problem was happening and you suggested unticking upnp forwarding in my Netduma's settings, so I have done that. I also just turned off my VPN. Sorry, I assume that may have been the problem. Link to comment Share on other sites More sharing options...
berty247 Posted September 19, 2016 Share Posted September 19, 2016 i have version 1.03.3 and have been told you guys have to do the update for me please help Link to comment Share on other sites More sharing options...
Lethal Posted September 19, 2016 Share Posted September 19, 2016 I've posted here a couple of times before regarding my upgrade to 1.03.6 but I've had no response? Is it something I'm doing wrong or am I mistaken? Any help appreciate Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted September 19, 2016 Author Administrators Share Posted September 19, 2016 On 9/16/2016 at 5:41 PM, james1987 said: hi ive done what u have asked can u proceed again ty We could not access your router. Please port forward 1024 - 60,000 TCP from the ISP hub to the R1 or post in the 1 on 1 section and I can have a look to try and make you accessible. On 9/17/2016 at 5:36 AM, duronx2 said: I went ahead and disabled the UPNP, I do not have access to the ONT or Modem for my fiber. You're good to go. Please do not reboot before upgrading. On 9/18/2016 at 3:36 PM, JackalJake said: Trying this again. R1 debug version 1.03.3 running on rb-951g-2hnd -The R1 WAN IP is set in the DMZ of my ISP modem/router -UPnP & Port forwarding is now disabled in my ISP modem/router -Remote access is checked in the R1 misc settings Thanks We could not access your router. Please port forward 1024 - 60,000 TCP from the ISP hub to the R1 or post in the 1 on 1 section and I can have a look to try and make you accessible. On 9/18/2016 at 9:32 PM, kouhaipls said: I have remote support ticked and I want to upgrade I am showing I am running 1.03.3 You're good to go. Please do not reboot before upgrading. On 9/19/2016 at 12:21 AM, thattwopiece said: hi..I am on an older version and i have remote support ticked i would like to upgrade current version im on : 1.03.4 You're good to go. Please do not reboot before upgrading. On 9/19/2016 at 2:09 AM, Tree0wl said: I have R1 debug version 1.03.3 running on rb-951g-2hnd and would like to upgrade. Can you please log in and work your magic? Thanks You're good to go. Please do not reboot before upgrading. On 9/19/2016 at 8:37 AM, jtwrules said: Thanks for your response. The Netduma is the only router I am using. I saw in another post the same problem was happening and you suggested unticking upnp forwarding in my Netduma's settings, so I have done that. I also just turned off my VPN. Sorry, I assume that may have been the problem. We could not access your router. Please port forward 1024 - 60,000 TCP from the ISP hub to the R1 or post in the 1 on 1 section and I can have a look to try and make you accessible. On 9/19/2016 at 9:45 AM, berty247 said: i have version 1.03.3 and have been told you guys have to do the update for me please help We could not access your router. Please port forward 1024 - 60,000 TCP from the ISP hub to the R1 or post in the 1 on 1 section and I can have a look to try and make you accessible. On 9/19/2016 at 10:54 AM, Lethal said: I've posted here a couple of times before regarding my upgrade to 1.03.6 but I've had no response? Is it something I'm doing wrong or am I mistaken? Any help appreciate We posted before that we could not access your router, please do the following: Ensure the R1 WAN IP is in the DMZ of your ISP hub. UPnP & Port forwarding is disabled on your ISP hub and that remote access is ticked on the R1 in settings > miscellaneous. Link to comment Share on other sites More sharing options...
duronx2 Posted September 19, 2016 Share Posted September 19, 2016 @Fraser now that I am good to go, just follow the steps in the first post? Link to comment Share on other sites More sharing options...
berty247 Posted September 19, 2016 Share Posted September 19, 2016 0k so i have opened the ports requested on my bt home hub ( 1024 - 60000 ) i have also ticked the allow remote access to netduma tech support is there anything else i need to do to help with you updating my R1????? Link to comment Share on other sites More sharing options...
oLollipop Posted September 20, 2016 Share Posted September 20, 2016 Can someone help me please? I don't understand how to upgrade. I posted back in June as instructed but got no response... Link to comment Share on other sites More sharing options...
oLollipop Posted September 20, 2016 Share Posted September 20, 2016 Sorry, I just saw that you replied and said I was good to go. However, between the time you posted that and today, I have since rebooted my router. Can you please make sure I can upgrade again? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.