DARKNESS

Just saw the post but no it doesn't work either

Waveform is not accurate I'd suggest just running ping plotter test since you get the best data however it is a bit time consuming and you have to understand how it works just a tip of advice if you do and your trying to see hops and some show red coming from ISP it just the fact they don't allow packet to pass back and forth etc just do to ddos. All you need to pay attention is last hop when your looking at the performance and they're might be jitter spikes which is common about 30-40ms all depends on your network.

I would recommend using the mobile app it just faster instead of having to pull up laptop/pc if your a console gamer. As for chats on Xbox can't say much I am ps user you'll still have to manually whitelist players that join party chat depending on your geofilter settings range.

Just a tip of advice you should probably make a sub forum called beta testers for betas for all routers and name each one script policy etc to simplify how you would apply. Not trying to boss around it just make life much easier

Applied so what now do I get a file email or something?

You can't avoid sbmm in cods the better you are the worst the servers become similar to apex legends. They focus all high ranked players to one server location and expect all of them to live on the same area. Like I can be playing 20ms and because I beat my wonker so much I now have to play 100ms. Unless you play on casual bot lobbies which i refer to as scrubs and that playing on console being forced to play with PC fags 3x faster input no cap.

Is the beta open for testing if so id like to be added.

If you have that error I suggest re-syncing cloud and/or rebooting router and if it persist hard reset

Sad reality your probably being forced with sbmm you’ll get melted regardless lmao new cods all suck that a fact bad audio etc

Buddy that depends on your setup on qos also I wouldn't connect the nighthawk app because it actually causes issues with dumaos and will have to do a hard reset to fix ironic id say to be best you sound like you basically want to see your speeds without qos. Though your speeds might be different do to the server they're being connected to I would just run a pingplotter test to find the most optimal ping while on qos. I am ping geek and and the worst of your enemies is jitter that just do to crappy isp that i live next around and monopoly is a thing. DUMA uses m labs as theyre test so it might be connecting you to a further server other times also I wouldn't be trying to find or adjust the qos based on the scheduled test because those aren't accurate for the most part they have some issues with the data.

Hello just checking if xr1000 beta test is out yet if not I'd like to be added for the testing.

What firmware u on? I'd suggest not using the netgear app if you are it basically messes up with the router from my experience just manually do it just from dumaos software and do hard reset when doing so this is do to netduma and netgear relationship clearly being so great that issues like this happen they probably wont admit it but it known.

Hard reset and try again regardless of that if you are using mobile version use desktop mode and change the scaling so that it adjust properly depending on the phone u use it might not work properly which is why you use a desktop/pc. Also if it let you access the the site on mobile device it should also let you use the desktop you might not be refreshing the browser cache. You might also need to type ip for router manually sometimes it bugs out after reboot don't ask me why but that sometimes a thing.

If I were u I'd turn off mirror settings and just have both 2.4 and 5 GHz separately Ive noticed actually let me rephrase Ive known this channel thing been an issue for a while depending on the devices you use it may or not be compatible and then depending on your surrounding it may also have an affect. Also changing frequency should just do a boot u sequence id suggest reinstalling the firmware and hard resetting and maybe even plug and unplug router to refresh cache for 5 minutes. I can tell u it a nuisance but that the best advice I can give you can also just downgrade to version of firmware all u do is download the file and apply to were it says update again and remember to always hard reset after updating that means holding the reset button for 30 secs.

Have u tried dmz ur network? typically that would solve the issue there a guide etc to have open nat if ur having issues. https://support.netduma.com/support/solutions/articles/16000076587-dumaos-optimal-settings-guide-open-nat

Typical wait time is a year from what I've seen which is fine as long as the firmware is stable also hybrid vpn is not too good regardless. It kills your speed by half from on my end using nordvpn might be just the fact nordvpn sucks couldn't say for sure might also just be the fact it not stable currently or the hardware for the r2 can't run it stable do to limitations not the expert so don't quote me on that but the more ram the more sufficient it runs and id guess it reaching it limits when over processed by too many task.

Have you only tested it on one device?

I've also experienced the same issue this was tested on both IOS and Android... So from my end of the issue I see is that geofilter on custom/polygon mode just isn't detected even though on the browser/desktop version it works fine however the circle/simple mode works perfectly fine. I've also tried resync that didn't work on the mobile version so there miscommunication with app interference and no there no option to export logs since you get the error shown on the image below. As for the r2 it is detected as point of reference I own both devices. Also I noticed that the congestion control isn't responsive sometimes I personally stopped using it since i just find the connection benchmark much more accurate. I would give some advice on the app is to get rid of the ping test and just have the under load down and up test since that's what actually gives you the best data of whether your latency is improved or not of course latency fluctuates but you get the point to minimize buffering. However that preference of the user whether they want lower latency or high speed with less congestion. ISSUE IS NOT ON THE R2 IT ON XR1000

I believe it DHCP that what shows up on the dashboard, as for the bandwidth allocation I have it on share excess. I know on my r2 there no issues with it i know disabling might help but that pretty much kills bandwidth on the network. I haven't tested it since I wouldn't personally use it regardless. The issue is it pretty much disables qos for upload after u apply/save the configuration.

Actually I take that back I noticed that the reason for it working is because the file has to be opened and then it configures itself to the chk file and then you can select it.

Also I had some issues trying to downgrade etc it would tell you to change file name to chk I believe it was however that was fixed by hard reset just another thing I've found and changing the file name wouldn't do much i tried unzipping on mac no results. On windows it might work though i am mac user as of my preference currently.

Tried that no changes....I've also disabled ipv6 thinking that might of been the cause but doesn't seem to be the case.

The flowers says it applied but clearly it not working as stated before I tried both devices/applications. I can send a screenshot of the logs though doubt that'll help much...

It goes back to normal after resetting but clearly you can't bandwidth allocate etc for the time being I guess....

VT.mp4