Jump to content

KinGzzy

Members
  • Posts

    411
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by KinGzzy

  1. How do we get the server IPs if they are all behind reverse proxie? If a reverse proxy is properly configured and secured, it becomes extremely difficult to retrieve the IP of the backend server.
  2. They added a few more servers and a lot of relay servers which are mainly located in Singapore but nothing too bad just a little extra work. But know that these servers are not visible right away they will appear as the blockage intensifies. at least that's what happened on my side.
  3. I need a VPS for a future project so it will be an opportunity to do this one at the same time right now I'm taking a break so we'll see all that later. I would like to make a VPN as close as possible to the Cod VPNs so it will be a VPS for example in Cambodia I would activate routing on the VPS I would install WIREGUARD and from my local network I would redirect the Cod traffic which will be tunneled to the VPS. Logically it should work but hey we'll test all that and we'll see.
  4. This is precisely one of my future projects to create a VPN like NolagVPN. I have a little idea of how it works but we'll see. VPS + routing should be enough
  5. Your initial configuration was more or less good since the R2 received an IP in 192.168.6.xx except for the forwarding ports that I could see you had put the IP in 192.168.1.119 instead of 192.168.6.xx and for the dhcp range do not start with 1 but rather from 10. Seen in the R2 logs there is a dhcp error compared to the IP of the PS5 I advise you to do a manual configuration of the network at the PS5 level...Configure vlan 6 to the desired port at the unifi level...Test it like that already....
  6. If you want to configure without vlan 6 a simple customization of the dns on the ps5 will allow you to have access to the internet and if you want to set up vlan 6 we will need more information.
  7. Did you remove the vlan?? a screen of the setting use the dark mode please
  8. Hello, Can we have a screen of the R2 setting in the topology tab at the unifi level.
  9. Voici la liste des serveurs BO6 extrait et tester par mes soins.....ENJOY.
  10. A simple wireguard tunnel is enough, that's what I use to access my network remotely.
  11. If the ISP router allows it, it can be done at the firewall level "risk of losing access to the Internet" if you don't know what you are doing.
  12. Here we are talking about Public IP not local IP and a reboot may be necessary
  13. IPv4, IPv6, and port forwarding (connectfibre.co.uk) Bad News
  14. Double nat is quite normal you have 2 routers so double nat on the other hand strict nat is not supposed to happen. As @Fuzy mentioned on your screen at the firewall level you have activated filter nat which is not very good for video games in general, so uncheck it. Even if after that it still does not work delete the DMZ and redirect all ports to the R3. PS: You are not in CGNAT?
  15. What's the problem, double nat or strict nat?
  16. Moderators, I don't know how you do it, but strength to you!!!!!! Why 192.168.1.39
  17. we're not very young anymore neither😔
  18. I understand you completely and it is not a criticism that I am making to you on the contrary the thread of the subject discussing on the different alternatives (pfsense, ddwrt, opnsense) I just gave my opinion on debian to have tested them all . And I started tinkering very late and it became a passion. I'm not here to tell people what to do or not to do.
  19. I don't consider myself old but I'm still 42 years old with a family and a job. Certainly I devote myself less and less due to lack of time but as soon as I have the opportunity I continue to satisfy my thirst for knowledge. Personally.
  20. For my part since I switched to Debian I have found my happiness I would never change Debian for anything else. Moreover I am in the process of adapting a web interface to Debian..what happiness
  21. T'a raison j'ai un peu mit de coté pour me vider la tête et repris un peu aujourd'hui et voici le brouillon j'en suis un peu fier vu que c'est la première fois que je fais ça:
  22. Mettre en place une liste pour voir quelle ip et bloqué et quelle ip est autorisé et créer une option pour pouvoir supprimer la règle en cas de mauvaise gestion comme dans le second screen au dessus. En ce moment j'essaye de mettre en place une interface graphique web a mon router qui est en ligne de commande et je comprend le boulot accomplit par netduma durant ces années. ça fait que quelque jours que je bosse dessus et j'ai déjà envie de tout arrêter par manque de temps de moyen et surtout je suis seul sur le coup.
×
×
  • Create New...