NEW R3 FIRMWARE - DumaOS 4.0.540

[banjo22]

2 minutes ago, Netduma Fraser said:

N

Right click the page, then go to Inspect (Element), on the window that appears click on the Network tab. Then click the checkbox to disable cache. Then click and hold the browser refresh button, and click Empty Cache and Hard Reload. Then see if it shows the firmware change.

Learn something everyday...! But no that didn't work...still old firmware

[banjo22]

I rebooted and tried again, I actually got an error this time around

[emopi84]

Mam to samo. Zaktualizowałem i mam  v4.0.290. Następnie ponownie zaktualizowałem i to samo. Następnie ponownie uruchomiłem R3 i R3 nie działa, tylko mam ekranowe dumaos i błąd krytyczny. Następnie zresetowałem R3 i to samo dumaos i błąd krytyczny. Przepraszam za mój angielski.

Jutro spróbuję jeszcze raz, ale myślę, że to nie jest dobre i potrzebuję pomocy. 

[Reese84]

Can I upgrade from my phone iPhone 16 ?

[Netduma Fraser]

1 hour ago, banjo22 said:

I rebooted and tried again, I actually got an error this time around

Factory reset and try again, alternatively, you can try doing this first to see if it works:

1 hour ago, Netduma Fraser said:

Upgrade to this firmware first, then if successful upgrade to the one from this topic.

DumaOS-R3-4.0.402.sig 38.94 MB · 1 download

 

1 hour ago, emopi84 said:

Mam to samo. Zaktualizowałem i mam  v4.0.290. Następnie ponownie zaktualizowałem i to samo. Następnie ponownie uruchomiłem R3 i R3 nie działa, tylko mam ekranowe dumaos i błąd krytyczny. Następnie zresetowałem R3 i to samo dumaos i błąd krytyczny. Przepraszam za mój angielski.

Jutro spróbuję jeszcze raz, ale myślę, że to nie jest dobre i potrzebuję pomocy. 

Try this please:
 

1 hour ago, Netduma Fraser said:

Reboot/keep accessing until you get to that recovery screen then try upgrading to this firmware first, then if successful upgrade to the one from this topic.

DumaOS-R3-4.0.402.sig 38.94 MB · 1 download

----

1 hour ago, Reese84 said:

Can I upgrade from my phone iPhone 16 ?

If you can download/upload the file on your web browser then yes - the interface may also show you have an update and you can update directly from the interface

[Gskillz]

The update before, I had to downgrade, but this update (4.0.540) has improved my ping and my speeds, on call of duty I've been averaging 60 to 100 kills on multiplayer, it's hitting the mark and this is the best one so far after using it since it was released. Great job guys.

[xBuTcHeRx]

Is this the same one as early access or is their a difference in this one?

[V1k1]

Update: Link speeds across all 4 ports are now showing 1000/1000 Mbps after a reboot. Not sure if a dev checked into my router to change anything.

I'm on the beta release/file of DumaOS 4.0.540. With this one announced as the same firmware number, would I need to update from the beta to this one, or is this exactly the same?

Also, since the beta update for 4.0.540, Ping Optimizer hasn't worked for me either throughout 3 different times in the day.

Thank you Netduma team! These updates are awesome and can't wait to keep seeing more improvements, stability, and features.

[emopi84]

Recovery screen is this? How upgrade on this screen? Have only save logs and reload this page.

[e32iL]

I had problems upgrading the firmware yesterday. It showed me everytime .290

This morning i unplugged the cable from wan port. Pc to r3 only without ethernet and it installed the new firmware. Maybe this helpes for others too.

[emopi84]

How look recovery screen Fraser?

[Sergheto]

he estado probando la nueva actualizacion y va muchisimo peor no la descargaris , con la anterior la conexion a los servidores era mejor mas estable y la geolocalizacion de union a servidor funcimionaba a la perfeccion , me volvere a descargar la version anterior sin duda

antes me metia siempre a 10 de ping y ahora entre 26 y 38 de ping ninguna mejoria al reves

[egwok]

Improved my 2g before I will get like 400mbps download on a 1 gig download speeds now I get 922mbps thank you. Still have to try out the geo filter it was unstable on the steady ping it would not stabilize any game I played . I’ll get back at ya. 

[Kurse007]

Thanks Fraser i didn't see that. It uploads now

[emopi84]

Yes! Its work! Im refreshing site, and R3 revive

 

Sorry for the spam, but i'm think, my R3 is dying:) 

THX for help:)

 

CYA:O

 

[Sergheto]

volvere a descargar y actualizarlo a la version 4.0.219

 

[Sergheto]

he vuelto a instalar la version 4.0.219 y vuelvo a tener el ping perfecto a 10 de pin en vez de la version nueva que iva a 25 38 de ping 

[ALKHAMIS]

I updated the device but I did not find the game Delta Force in Geo-Filter ? 

As mentioned in the new update

[BRUHItsABunny]

36 minutes ago, ALKHAMIS said:

I updated the device but I did not find the game Delta Force in Geo-Filter ? 

As mentioned in the new update

For application detection to work, do I need to do anything else after updating? and do I need to undo labeling devices as game consoles? I was testing COD Mobile just now, but it wasn't detected while I was looking at the smart boost and network activity

[Netduma Fraser]

16 hours ago, xBuTcHeRx said:

Is this the same one as early access or is their a difference in this one?

The same as far as I am aware.

16 hours ago, V1k1 said:

Update: Link speeds across all 4 ports are now showing 1000/1000 Mbps after a reboot. Not sure if a dev checked into my router to change anything.

I'm on the beta release/file of DumaOS 4.0.540. With this one announced as the same firmware number, would I need to update from the beta to this one, or is this exactly the same?

Also, since the beta update for 4.0.540, Ping Optimizer hasn't worked for me either throughout 3 different times in the day.

Thank you Netduma team! These updates are awesome and can't wait to keep seeing more improvements, stability, and features.

Great to hear that! Unless they were doing work at 2am I highly doubt it haha. Exactly the same as far as I am aware so no need to update again. We're looking into PO currently.

13 hours ago, emopi84 said:

Recovery screen is this? How upgrade on this screen? Have only save logs and reload this page.

Right click the page, then go to Inspect (Element), on the window that appears click on the Network tab. Then click the checkbox to disable cache. Then click and hold the browser refresh button, and click Empty Cache and Hard Reload. Then see if it loads correctly please.

6 hours ago, Sergheto said:

he estado probando la nueva actualizacion y va muchisimo peor no la descargaris , con la anterior la conexion a los servidores era mejor mas estable y la geolocalizacion de union a servidor funcimionaba a la perfeccion , me volvere a descargar la version anterior sin duda

antes me metia siempre a 10 de ping y ahora entre 26 y 38 de ping ninguna mejoria al reves

3 hours ago, Sergheto said:

volvere a descargar y actualizarlo a la version 4.0.219

2 hours ago, Sergheto said:

he vuelto a instalar la version 4.0.219 y vuelvo a tener el ping perfecto a 10 de pin en vez de la version nueva que iva a 25 38 de ping 

Probably needed to change a few things but if you're happy on that version fair enough!

1 hour ago, ALKHAMIS said:

I updated the device but I did not find the game Delta Force in Geo-Filter ? 

As mentioned in the new update

As mentioned there it's primarily for SmartBOOST, not for the Geo-Filter, if it does work we will add it there.

51 minutes ago, BRUHItsABunny said:

For application detection to work, do I need to do anything else after updating? and do I need to undo labeling devices as game consoles? I was testing COD Mobile just now, but it wasn't detected while I was looking at the smart boost and network activity

No you don't need to do anything, BI is enabled by default, it may not cover everything and I don't think we've looked into mobile much which is probably why

[V1k1]

Have had two recent mornings during work meetings where the router seemed to disconnect from wifi to my work laptop and phone, and I assume other devices. Seemed to disconnect for about 15 seconds and then it automatically reconnected.

Disconnect happened around 10:25 / 10:26 at the start of the logs, but looking at the logs, it only starts at 10:26 which is about when it came back online. Not sure if this captured the disconnect or if the logs started back up when it came back online.

I'm on the firmware download of this version from the beta page in which i factory reset after firmware update and have rebooted once since.

I also still cannot achieve my crazy low bufferbloat values that I had on the previous beta at 80% CC for download (Posted before in another topic, I can reattach screenshot if anyone is curious). I've tried so many values ranging from 60-100% and I can't get close. Nothing else has changed on my network since. The results were very low ms across the board - it only was the firmware update that changed. I ran tests right after then too, up to today trying to achieve low values.

Can't say what feels better/worse in games at the moment as I've been having mixed days on if i'm doing good or not due to work stress :P. So I am solely basing my results off of the waveform bufferbloat test. I did test in ping plotter per Netduma guide, which seems to be difficult to get a smooth enough line as shown.

Curious on everyone elses bufferbloat values before vs now.

Just wanted to give feedback so far.

R3_2025-02-07T18_37_01.652Z_logs.txt

[Netduma Fraser]

1 hour ago, V1k1 said:

Have had two recent mornings during work meetings where the router seemed to disconnect from wifi to my work laptop and phone, and I assume other devices. Seemed to disconnect for about 15 seconds and then it automatically reconnected.

Disconnect happened around 10:25 / 10:26 at the start of the logs, but looking at the logs, it only starts at 10:26 which is about when it came back online. Not sure if this captured the disconnect or if the logs started back up when it came back online.

I'm on the firmware download of this version from the beta page in which i factory reset after firmware update and have rebooted once since.

I also still cannot achieve my crazy low bufferbloat values that I had on the previous beta at 80% CC for download (Posted before in another topic, I can reattach screenshot if anyone is curious). I've tried so many values ranging from 60-100% and I can't get close. Nothing else has changed on my network since. The results were very low ms across the board - it only was the firmware update that changed. I ran tests right after then too, up to today trying to achieve low values.

Can't say what feels better/worse in games at the moment as I've been having mixed days on if i'm doing good or not due to work stress :P. So I am solely basing my results off of the waveform bufferbloat test. I did test in ping plotter per Netduma guide, which seems to be difficult to get a smooth enough line as shown.

Curious on everyone elses bufferbloat values before vs now.

Just wanted to give feedback so far.

R3_2025-02-07T18_37_01.652Z_logs.txt 103.06 kB · 0 downloads

Not entirely clear in the logs unfortunately what happened but I can pass them on. Your bufferbloat issues could well have been due to your port issues so now they're better, do you still get those same results? Also the dev made the changes within the last couple of hours and made it so they should persist with a reboot so keep us updated on how you get on with that. 

[Reese84]

I keep getting this and the WiFi drops I have to reboot to get WiFi back. The firmware won’t update 

[Netduma Fraser]

36 minutes ago, Reese84 said:

I keep getting this and the WiFi drops I have to reboot to get WiFi back. The firmware won’t update 

Try via ethernet if you can, if not reboot the router and try again please

[V1k1]

3 hours ago, Netduma Fraser said:

Not entirely clear in the logs unfortunately what happened but I can pass them on. Your bufferbloat issues could well have been due to your port issues so now they're better, do you still get those same results? Also the dev made the changes within the last couple of hours and made it so they should persist with a reboot so keep us updated on how you get on with that. 

I've been using Port 1 for my desktop PC, which is the Port that never had an issue.
It was only on the newest firmware that caused my results to stay much higher.
Screenshots uploaded. The one with A+ rating was before at 80% download, 100% upload. I could run it at the 80% multiple times in the day and achieve the very low results. Everything felt pretty good in games as far as I could tell. Didn't even have to use steadyping or anything.

The other screenshot with the A rating is on this firmware, 80% and 100%.

I know it's minimal, but I like trying to achieve the best results and I've had it before on the prior firmware, so I believe it's achievable.
Also, on this new firmware, this test result is much more inconsistent if I run a couple tests back-to-back (nothing changing on the network). Sometimes it goes to 8ms download, sometimes the download jitter is 10ms, sometimes the max is even higher, etc, you name it. I try 70% CC and everything in-between up to 100% and it's just very inconsistent. Ping plotter also shows the same now, i just wish i copied/saved results from prior firmware.

 

happy to hear the devs logged in to make sure the ports are good. please let me know if they want to check anything more out. happy to keep the door open!

I also sent you a follow up message on my wireshark results for my work laptop via VPN - please check this when you have the time. Would love for my work laptop to stop showing up as unknown(gaming).