bufferbloat Issue on xr1000

[ALL out]

Hi 

On my xr1000 if i disable Qos its give me lower bufferbloat and when i turn on gave my high bufferbloat i try on game to compare and on qos off i kill enemies very fast also try to change download & upload slider , its same maybe little different but not same qos off ! 
 

[Netduma Fraser]

Can you provide a screenshot of your QoS page showing the settings you usually use when it is enabled?

[David824]

are you saying you are killing enemies very fast with you QOS off or on?? Also, what game are you playing? on COD I actually have better games with my QOS off but thats because my speeds are high. I have fiber and if I turn my QOS off I get better bufferbloats because I'm getting full speeds which is making my ping lower...if I turn QOS on I get way lower speed readings and a lower bufferbloat score....which to be honest I dont even trust bufferbloat readings anymore.

[ALL out]

3 hours ago, David824 said:

are you saying you are killing enemies very fast with you QOS off or on?? Also, what game are you playing? on COD I actually have better games with my QOS off but thats because my speeds are high. I have fiber and if I turn my QOS off I get better bufferbloats because I'm getting full speeds which is making my ping lower...if I turn QOS on I get way lower speed readings and a lower bufferbloat score....which to be honest I dont even trust bufferbloat readings anymore.

Yes with Qos i kill enemy quickly i have fiber 100 M for me alone so if enabled Qos bufferbloat so bad i well share photos 

[ALL out]

Sorry..

with Qos off i kill Quickly 

[ALL out]

On 4/6/2023 at 5:39 PM, Netduma Fraser said:

Can you provide a screenshot of your QoS page showing the settings you usually use when it is enabled?

Sorry for being late as I mentioned, I live alone and I have fiber 100 m 

Qos setting 

Qos on 

Qos Disable 

[TrayDay]

11 minutes ago, ALL out said:

Sorry for being late as I mentioned, I live alone and I have fiber 100 m 

Qos setting 

Qos on 

Qos Disable 

I know this is counterintuitive. But, try inputting your max speeds for DL 150 and UL 50. Leave the congestion control at 100% but leave it as "ALWAYS". Basically, try to get your max speeds while also being able to utilize traffic prioritization.

[ALL out]

2 minutes ago, TrayDay said:

I know this is counterintuitive. But, try inputting your max speeds for DL 150 and UL 50. Leave the congestion control at 100% but leave it as "ALWAYS". Basically, try to get your max speeds while also being able to utilize traffic prioritization.

I have 100 try to bot max DL & UP its gave me same results 😅 

[Netduma Fraser]

You definitely need to be utilizing Upload on Congestion Control, start with a high value for Congestion Control, say 95% then do a test, decrease by 10%, test, decrease by 10% etc, until you get to a value that is pretty good and then try 5% either side of that value to see if it can be improved. It's important to note that Download & Upload on Congestion Control don't have to be the same value and that you may have a better experience with differing values.

[ALL out]

5 minutes ago, Netduma Fraser said:

You definitely need to be utilizing Upload on Congestion Control, start with a high value for Congestion Control, say 95% then do a test, decrease by 10%, test, decrease by 10% etc, until you get to a value that is pretty good and then try 5% either side of that value to see if it can be improved. It's important to note that Download & Upload on Congestion Control don't have to be the same value and that you may have a better experience with differing values.

I try different value gave me same results , maybe the best for me Qos off ! Because non use internet with me so 100 m for me alone ??

[Netduma Fraser]

It's possible Traffic Prioritization is affecting the results, if it's just you and you were using QoS then bufferbloat wouldn't be affecting you anyway. If QoS off works best then go with that!

[Harley]

Buffer bloat doesn't work on the XR1000 if you have a pppoe connection.

This is the result for me with the XR1000...

 

 

And this is the result for me with the XR700......

 

 

 

[ALL out]

1 minute ago, Harley said:

Buffer bloat doesn't work on the XR1000 if you have a pppoe connection.

This is the result for me with the XR1000...

 

 

And this is the result for me with the XR700......

 

 

 

So need update on xr1000 😅 , Do you recommend me move to R2 or stay on xr

[Harley]

3 hours ago, ALL out said:

So need update on xr1000 😅 , Do you recommend me move to R2 or stay on xr

Well there is a fix on the way, I believe.
Also, it doesn't look like you have that much of a problem with bufferbloat anyway, so I would wait for the fix.

[Netduma Fraser]

That will be resolved as above!