Are there dedicated servers on R1 1.03.6j firmware

[Jacques]

I had to downgrade my R1 router back to original, cuz I'm sick of rebbot every 2nd day my device (both 2.1.329 FW and 3.0.207 FW). I dont know why slows my speed down to 10%. Maybe a QoS problem, I dont know.

OK, I can live with this old firmware... but I cant see dedicated server icon, only circles. I know the biggest one is the host, but is it a possible a dedicated server? I play currently with CoD WWII, not Vanguard.

I looked for 1.3 firmware but I didnt find it in the forum and I dont have a backup.

[Netduma Fraser]

What are your expected/paid for speeds? - That's DumaOS the speed slows down?

On the original firmware it does not distinguish between peers and dedicated servers, though as you're playing CoD they will be dedicated servers. I would not suggest downgrading that far if you find it as you could brick the router.

[Jacques]

My internet speed is 140/10... after 2 days i have 15/10... and I canot understand why? I rebbot the device and its ok... for 2 days again. Sunday I can tell you its the same problem with this low firmware.

[Netduma Fraser]

Is this through WiFi and ethernet? Are you using PPPoE or anything like that?

[Jacques]

Ethernet. And no matter what firmware I use... its broken again: https://www.speedtest.net/result/12022709293

I will reisntall the latest firmware.

I dont know what PPPoE is, so I think I'm not useing it.

[Netduma Fraser]

What are your current QoS settings at the time of these slower speeds, can you provide a screenshot please?

[Jacques]

I reupdated the 3.0.207 FW last night, and made an auto-setup. Its look like this. This values were the same before I downgraded.

Dont bother with it. Just please in the next build write an R-App which reboot automatically the device at a time I set.

[Netduma Fraser]

Disable QoS completely from the Congestion Control  menu and see whether it stays more consistent

[Jacques]

OK, I have done it. After reboot, I get this results: https://www.speedtest.net/result/12035156332

I will update this topic if I notice any slowdown.

[Netduma Liam]

14 hours ago, Jacques said:

OK, I have done it. After reboot, I get this results: https://www.speedtest.net/result/12035156332

I will update this topic if I notice any slowdown.

OK sounds good, feel free to go ahead and setup your QoS settings and make sure it's adhering to the Congestion Control values you set.

Let us know how you get on!

[Jacques]

I wanted to play some, but Rapps cant load, neither in Chrome or Firefox. QoS, Geo-Filter menu also doesnt load. I have to rebbot, but I run a speedtest before. The results: https://www.speedtest.net/result/12040572105

Today I watched some youtube and surf on the net (social apps on the phone like FB or Instagram.)

I dont know why cant load Rapps.

 

[Netduma Fraser]

Go to the System Information page, on the Rapp panel  menu change retries to 5 then reboot from the interface - important to do it from the interface and not just pull the power. Then wait 2 minutes before accessing and everything should load

[Jacques]

Thanks the Rapp tip.

The slow down problem came up again with disabled QoS: https://www.speedtest.net/result/12046069813

 

[Netduma Fraser]

Could you try some different speedtest.net servers and see whether you get the same results please?

[Jacques]

Before I left my home the speed was full. Nobody use the net cuz nobody were at home.

result1: https://www.speedtest.net/result/12058832576

result2: http://www.dslreports.com/speedtest/69558269

I'am the guy with light bulb topic, the issue since then. But the lighht bulb is not the problem cuz I dont use it anymore.

[Netduma Fraser]

Can you take a screenshot of the Device Manager table view please? Are you using PPPoE or anything like that to connect to the internet?

[Jacques]

I dont have username and password to my internet.

 

[Netduma Fraser]

Click the  menu icon on the Network Map, switch to Table View, then take a screenshot and post it here please.

[Jacques]

Do you need Devices Table too?

[Netduma Fraser]

That's the one thank you, everything looks fine there. In WAN Settings disable all the protection options then do another speedtest please and see what you get

[Jacques]

like this?

 

[Netduma Fraser]

Yes exactly, also disable IPv6 in WAN and LAN - do the speeds then increase?

[Jacques]

I turned off IPv6 both place. But I had to reboot the device. Now the speedtest result: https://www.speedtest.net/result/12094092701

If it will slow down in few days I will write again.

[Netduma Fraser]

Brilliant, keep us posted!

[Jacques]

OK, I have a high ping now. What should I turn back on?

Edit:

After MODEM restart I get this result: http://www.dslreports.com/speedtest/69625224

Im thinking if this problem cannot solved, I have an old TP-Link router not in used. How should I configure R1 behind this TP-Link router. I dont need all of the features exept Geo-Filter. TP-Link router will handle phones on wifi, and my wired laptop... the R1 will be between TP-Link and Xbox One X. I will make a factory reset on R1, turn off all features (Upnp, QoS, Port forwarding... etc, only wanna use Geo-Filter). Where and what can I configure on R1?

Edit 2:

I dont understand it. This is another test result after test of built in connection benchmark: https://www.speedtest.net/result/12095695523