Jacques Posted September 9, 2021 Share Posted September 9, 2021 I had to downgrade my R1 router back to original, cuz I'm sick of rebbot every 2nd day my device (both 2.1.329 FW and 3.0.207 FW). I dont know why slows my speed down to 10%. Maybe a QoS problem, I dont know. OK, I can live with this old firmware... but I cant see dedicated server icon, only circles. I know the biggest one is the host, but is it a possible a dedicated server? I play currently with CoD WWII, not Vanguard. I looked for 1.3 firmware but I didnt find it in the forum and I dont have a backup. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted September 9, 2021 Administrators Share Posted September 9, 2021 What are your expected/paid for speeds? - That's DumaOS the speed slows down? On the original firmware it does not distinguish between peers and dedicated servers, though as you're playing CoD they will be dedicated servers. I would not suggest downgrading that far if you find it as you could brick the router. Link to comment Share on other sites More sharing options...
Jacques Posted September 10, 2021 Author Share Posted September 10, 2021 My internet speed is 140/10... after 2 days i have 15/10... and I canot understand why? I rebbot the device and its ok... for 2 days again. Sunday I can tell you its the same problem with this low firmware. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted September 10, 2021 Administrators Share Posted September 10, 2021 Is this through WiFi and ethernet? Are you using PPPoE or anything like that? Link to comment Share on other sites More sharing options...
Jacques Posted September 12, 2021 Author Share Posted September 12, 2021 Ethernet. And no matter what firmware I use... its broken again: https://www.speedtest.net/result/12022709293 I will reisntall the latest firmware. I dont know what PPPoE is, so I think I'm not useing it. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted September 12, 2021 Administrators Share Posted September 12, 2021 What are your current QoS settings at the time of these slower speeds, can you provide a screenshot please? Link to comment Share on other sites More sharing options...
Jacques Posted September 13, 2021 Author Share Posted September 13, 2021 I reupdated the 3.0.207 FW last night, and made an auto-setup. Its look like this. This values were the same before I downgraded. Dont bother with it. Just please in the next build write an R-App which reboot automatically the device at a time I set. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted September 13, 2021 Administrators Share Posted September 13, 2021 Disable QoS completely from the Congestion Control menu and see whether it stays more consistent Link to comment Share on other sites More sharing options...
Jacques Posted September 14, 2021 Author Share Posted September 14, 2021 OK, I have done it. After reboot, I get this results: https://www.speedtest.net/result/12035156332 I will update this topic if I notice any slowdown. Link to comment Share on other sites More sharing options...
Netduma Liam Posted September 15, 2021 Share Posted September 15, 2021 14 hours ago, Jacques said: OK, I have done it. After reboot, I get this results: https://www.speedtest.net/result/12035156332 I will update this topic if I notice any slowdown. OK sounds good, feel free to go ahead and setup your QoS settings and make sure it's adhering to the Congestion Control values you set. Let us know how you get on! Link to comment Share on other sites More sharing options...
Jacques Posted September 15, 2021 Author Share Posted September 15, 2021 I wanted to play some, but Rapps cant load, neither in Chrome or Firefox. QoS, Geo-Filter menu also doesnt load. I have to rebbot, but I run a speedtest before. The results: https://www.speedtest.net/result/12040572105 Today I watched some youtube and surf on the net (social apps on the phone like FB or Instagram.) I dont know why cant load Rapps. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted September 15, 2021 Administrators Share Posted September 15, 2021 Go to the System Information page, on the Rapp panel menu change retries to 5 then reboot from the interface - important to do it from the interface and not just pull the power. Then wait 2 minutes before accessing and everything should load Jacques 1 Link to comment Share on other sites More sharing options...
Jacques Posted September 16, 2021 Author Share Posted September 16, 2021 Thanks the Rapp tip. The slow down problem came up again with disabled QoS: https://www.speedtest.net/result/12046069813 Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted September 16, 2021 Administrators Share Posted September 16, 2021 Could you try some different speedtest.net servers and see whether you get the same results please? Link to comment Share on other sites More sharing options...
Jacques Posted September 19, 2021 Author Share Posted September 19, 2021 Before I left my home the speed was full. Nobody use the net cuz nobody were at home. result1: https://www.speedtest.net/result/12058832576 result2: http://www.dslreports.com/speedtest/69558269 I'am the guy with light bulb topic, the issue since then. But the lighht bulb is not the problem cuz I dont use it anymore. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted September 19, 2021 Administrators Share Posted September 19, 2021 Can you take a screenshot of the Device Manager table view please? Are you using PPPoE or anything like that to connect to the internet? Link to comment Share on other sites More sharing options...
Jacques Posted September 24, 2021 Author Share Posted September 24, 2021 I dont have username and password to my internet. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted September 24, 2021 Administrators Share Posted September 24, 2021 Click the menu icon on the Network Map, switch to Table View, then take a screenshot and post it here please. Link to comment Share on other sites More sharing options...
Jacques Posted September 25, 2021 Author Share Posted September 25, 2021 Do you need Devices Table too? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted September 25, 2021 Administrators Share Posted September 25, 2021 That's the one thank you, everything looks fine there. In WAN Settings disable all the protection options then do another speedtest please and see what you get Link to comment Share on other sites More sharing options...
Jacques Posted September 26, 2021 Author Share Posted September 26, 2021 like this? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted September 26, 2021 Administrators Share Posted September 26, 2021 Yes exactly, also disable IPv6 in WAN and LAN - do the speeds then increase? Link to comment Share on other sites More sharing options...
Jacques Posted September 26, 2021 Author Share Posted September 26, 2021 I turned off IPv6 both place. But I had to reboot the device. Now the speedtest result: https://www.speedtest.net/result/12094092701 If it will slow down in few days I will write again. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted September 26, 2021 Administrators Share Posted September 26, 2021 Brilliant, keep us posted! Link to comment Share on other sites More sharing options...
Jacques Posted September 26, 2021 Author Share Posted September 26, 2021 OK, I have a high ping now. What should I turn back on? Edit: After MODEM restart I get this result: http://www.dslreports.com/speedtest/69625224 Im thinking if this problem cannot solved, I have an old TP-Link router not in used. How should I configure R1 behind this TP-Link router. I dont need all of the features exept Geo-Filter. TP-Link router will handle phones on wifi, and my wired laptop... the R1 will be between TP-Link and Xbox One X. I will make a factory reset on R1, turn off all features (Upnp, QoS, Port forwarding... etc, only wanna use Geo-Filter). Where and what can I configure on R1? Edit 2: I dont understand it. This is another test result after test of built in connection benchmark: https://www.speedtest.net/result/12095695523 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now