Administrators Netduma Fraser Posted November 17, 2018 Administrators Posted November 17, 2018 Ah I see, like the original R1 option that would attempt to forward ports on the upstream router? It hasn't been mentioned but in general it shouldn't be needed as long as you put the R1 in the upstream router's DMZ or put it in modem mode.
RobReapz Posted November 17, 2018 Posted November 17, 2018 4 hours ago, Netduma Fraser said: Ah I see, like the original R1 option that would attempt to forward ports on the upstream router? It hasn't been mentioned but in general it shouldn't be needed as long as you put the R1 in the upstream router's DMZ or put it in modem mode. I would also like to see this feature as i run a 2 network setup and dont want to DMZ the R1 or mess about port forwarding. It worked great in the old firmware but it seems upnp doesnt cut it for me on DumaOS atm. Also fraser can you let me know if its ok to go from 1.03.6j to 1.03.6i? Thanks.
Administrators Netduma Fraser Posted November 17, 2018 Administrators Posted November 17, 2018 Okay good to know, thanks for letting us know your use case. I wouldn't recommend it, there is no difference between the versions at all. Would suggest staying on j
Dan Posted November 19, 2018 Author Posted November 19, 2018 My internet use Pppoe and lose quite a lot of bandwidth if Pppoe enabled on R1. Can't put Pppoe on modem. To overcome this I have modem to router with Pppoe to R1 to all devices. Double router gives me full speed. Forward upnp gives me open NAT everytime.
Administrators Netduma Admin Posted November 19, 2018 Administrators Posted November 19, 2018 Ok, thanks for letting us know. We are overhauling the entire settings area soon so I would assume this would be captured in the improved version (can't guarantee though)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.