Sergejs Kotovs Posted March 9, 2018 Share Posted March 9, 2018 Media Reciver 400 не работает с Netduma почему?Media Reciver 400 connected via cable five seconds shows then shows a very short and then stops showing I can not watch TV Link to comment Share on other sites More sharing options...
BIG__DOG Posted March 9, 2018 Share Posted March 9, 2018 use port forwarding and open ports 1 - 65535 tcp and udp for that device and see if that solves your issue.......before doing that though please make sure you have given your media receiver a static ip address and that you have disabled UPnP.. Please let us know if that solves your issue! Link to comment Share on other sites More sharing options...
Netduma Staff Netduma Jack Posted March 9, 2018 Netduma Staff Share Posted March 9, 2018 Media Reciver 400 не работает с Netduma почему?Media Reciver 400 connected via cable five seconds shows then shows a very short and then stops showing I can not watch TV Hi, welcome to the forum! Please let me know if Big Dog's solution above works for you Link to comment Share on other sites More sharing options...
Sergejs Kotovs Posted March 9, 2018 Author Share Posted March 9, 2018 use port forwarding and open ports 1 - 65535 tcp and udp for that device and see if that solves your issue.......before doing that though please make sure you have given your media receiver a static ip address and that you have disabled UPnP.. Please let us know if that solves your issue! where to set a static ip address Link to comment Share on other sites More sharing options...
Netduma Staff Netduma Jack Posted March 9, 2018 Netduma Staff Share Posted March 9, 2018 where to set a static ip address You can set a static IP in Settings > DHCP Lease. Tick 'Reserved' next to your media receiver and then type in the last few numbers you see on its IP address in 'Host Number'. (For instance, if your device had the IP of 192.168.1.100, you would type in '100'). I hope this makes sense, please let us know if you have any questions Link to comment Share on other sites More sharing options...
Sergejs Kotovs Posted March 10, 2018 Author Share Posted March 10, 2018 thanks for the help but it did not help Media Recever -Model MR400 SER.NR.; HDD50455LRC problem still exists Link to comment Share on other sites More sharing options...
Sergejs Kotovs Posted March 10, 2018 Author Share Posted March 10, 2018 use port forwarding and open ports 1 - 65535 tcp and udp for that device and see if that solves your issue.......before doing that though please make sure you have given your media receiver a static ip address and that you have disabled UPnP.. Please let us know if that solves your issue! thanks for the help but it did not help Media Recever -Model MR400 SER.NR.; HDD50455LRC problem still exists Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted March 10, 2018 Administrators Share Posted March 10, 2018 Was this provided by your ISP by any chance? If so it may be locked to only work when connected to their hub where it can check you have an active subscription, switch it back and see if it works immediately Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.