Jump to content

Port 30130 for CoD?


Areuz

Recommended Posts

I was playing CoD IW and the game felt terrible. I was getting absolutely melted and couldn't kill a thing. So I was going through my settings and seeing if anything was wrong. I checked the network monitor and noticed my PS4 game traffic was using port 30130 instead of the 3074 that I have hyper traffic and port forwarding for. Is there a reason for this? Any way I can guarantee that it wont happen again? What is port 30130 used for anyway? Local Port? 

Link to comment
Share on other sites

Any reason you can think of that it is such a bad experience? The games when it is on the default 3074 it feels good.

Not really, the way I understand it is port 3074 UDP and TCP (Source and Destination) are always used but 30130 in your case was the port the dedicated server was using.

 

I have had lone person tell me in the past they rerouted all traffic to their PS4 to go through 3074 and claimed it worked for them... I hear a lot of things tho.

Link to comment
Share on other sites

Aright let me help...!!!  First 3074 is the only port call of duty use for playin... no other ports are used !!! AREUZ: It is not a cod playin port since cod only play via 3074... it only can be one of thoses few ports the playstation use and if it was the only port showin while you was playin you definitly was on moderate or even strict in the game since only port 3074 make cod open in game (you can see that your game is open moderate or strict when entering in online in the game... like just before the next click to get in your lobby... it is on bottom right corner of your screen... and if you don't see it just go back like you are getting out of the game till you see it). There is some reasons why there are bugs like that and it's not only our super R1's fault nor the game or the equipment you use or even your isp's fault :P ... it can be your setup or simply your r1 settings that need to get set accordingly to what ya want to do with it at that time !!!  I have tried each and every setup possible with it... like i read each and every posts and replies and i test regularly every fix or setups given at the moment !!! In fact at the moment... guys on ps4 should... disable ports forwarded (just click disable beside them so it won't erase them if other setings are not good for you) then enable UPNP (it's one of the real fixes that fix hanging browsers and shits like that. It also fix if just like me you use 2 ps4 on the same router. Since a lil bit more of a month now... upnp is the only way to bring any port open on the second ps4 and then bring it out as 3074 even on the second ps4 (my 1st ps4 is from 3074 to 3074... on the second ps4 it bring whatever the port wich is not 3074 in and then bring it 3074 out) so both ps4 are playin on the 3074 as it is supposed to !!! Impossible to do at the moment by selecting ports to forward them by ourself !!! With that... i have a 120mb down and 20up so i should use turbo to get all my bandwith... but if i set turbo on... unplayable (playable but even if you a pro you will get so much recoil and no pros want that) . So put turbo off !!! The only other thing that affect the gameplay (playable vs unplayable cuz too much recoil) is Reactive ..... PUT YOUR R1 IN Preemptive before gaming even with more bandwith than 100mb/s !!! So hypertraffic we use is: 9306 udpboth 9307 udpboth 9308 udpboth (since those 3 ports are the ones playstation is using at the moment between them and your ps4) and now the last and more precious one... port 3074 udpboth port !!!!!!!!!!!!!!!!!!!!!!! Nothing more to add there !!! Put congestion control at 70/70 !!!  You can let device prioritisation's share excess on but it will give you less consistent games (like one game you gonna jump like an easy rabbit and the next game you gonna feel heavier on same moves as the game before) so i uncheck upload share excess !!! A couple of times from now i was unchecking both share excess but lately things have changed and now it's flawless even with download checked and since download share excess is checked the game is searching lobbies way more faster since around 18 mb/s is coming in :P  !!!  My upload is set at around 300kbps bu putting both ps4 at 3 on upload prioritisation (wich should not be called prioritisation since it is not prioritising anything... it is simply a bandwith allocation) !!!  Geofilter is at around 600 miles... unchecked autoping host and check strict mode !!! Go on VPN and uncheck enable (except if you have set it up good with your own account) Wan and Lan mtu are both set to 1500 and even on the ps4 manually (since i'm on cable provider and cable use 1500... set it to 1492 if you on dsl or fiber)  The only thing checked in miscelleanous is Enable Cookies !!!  On your Ps4 GUYS you REALLY have to make a manual configuration of your network.... REAAAALLY  ;)   !!!! For those open ports if you guys think i'm out of this world :P ah ah ah watch upnp after you started your ps4 and or after you played call of duty... you will then see i'm hella right with thoses 4 ports they use now as of August 2017 !!!!!!!!!!!!! (Well to be smarter i'll tell you this... maybe thoses 3 ports they use can be different between my country and yours so brightly guys disable forwarded ports as i've said and open upnp...  start your ps4 and enter in game play a little and watch wich port upnp is using then add this port to hyper traffic udp both, don't use tcp guys !!! each console is supposed to use only 3 different ports so you will only need to put thoses 3 ports in hyper traffic with the fourth one for cod wich is 3074)  It definitly is for Infinite Warfare on PS4 at the moment and i've erased bo3 from my ps4 so can't confirm it is still the same ports still but it was a couple of weeks ago !!! Even if they change thoses ports... since upnp is open check it sometimes to see if they changed ports in upnp... when they change them again you then add thoses ports on the hyper traffic so you'll get 3 hyper ports open plus the 3074 for 1 ps4 (that's what i did couple of weeks ago when they changed them ports and everyone here was havin trouble ) !!! PS: The major way for them to change ports is with updates so normally i always watch upnp for a couple of hours after any update for sure and from last year till now from bo3 to iw the only times they changed ports was by update or at the same time they update and by update it may simply be the lil on-game update that is forced when you want to play online you see ;) so not only big updates but lil in-game updates are to watch too :P !!!  As of right now... i took a lil  pause from writing all this helpfull info :P and tested it again... i don't have the same stability with the game if hyper traffic is set to only playstation (like if the router or ps4 is searching something better at times) not sure how to clearly explaining that since i'm a french "mothaf***a" from Montreal, Quebec   ah ah ah   ;)   It is the case when only my 1st ps4 is hooked but wait... yep you right... i said i play with 2 ps4 at same time... so what about the second one... already said that port forwarding should be disable (anywayz you can't set port forward for 2 ps4 with same ports... impossible so like i said you disable it and you use UPNP... and for hyper traffic it's the same (you can't put both same ports) so only for the second ps4 since you can't know wich ports the second ps4 gonna use with the friendly upnp... you put only this second ps4 hyper traffic on PLAYSTATION .... nothing more . So you would have 4 hyper ports open for the first ps4 and then a 5th and only one setted as Playstation to the second ps4 !!!  Both ps4's should be Enabled in host filtering as Playstation Network or only the one you use if you use only one  !!!  DHCP Lease you have to reserve the ip for each consoles and things that are hooked to your router... like cellphone and computer ect !!!  After changing any settings in the duma... by the duma control panel in miscelleanous you restart the router, always !!! Me what i do is more pro and we feel the difference each and every time ... i also press reset on my modem each time i restart my duma !!!  Before restarting i close cellphones and ps4's... i press the restart router in duma panel but not confirming it right away... i then press the lil reset button behind the isp modem holding it 5 seconds and then i release it and get back to my mouse and then confirming the restart of the duma then a popup confirmation is showing saying to not use it for 1 minute after reboot so then i close my computer... i wait 2 minutes before starting anything back on (at my house since my r1 is hook to a modem but at my girlfriend's house she use the isp modem and the isp router so for her she have to wait around 4 to 5 minutes before every lights are stable then get back on !!!)  I also changed my modem 2 weeks ago from my isp after reading confirmation on puma6 chipset problems confirmed here by another duma man : http://forum.netduma.com/topic/20681-best-gaming-modems/?hl=modem     so you might check that since modem is the first foot in your setup so if it's not doin good even the best router in the world will have problems once in a while !!!  I as stated am using only my r1 and a modem from isp... i can't confirm theses settings are working good or not if you use your r1 with another router or with an isp's all in one crappy thing !!!  Hope it help !!!  Have a good gaming tiiime !!! ps4's id : DMC51450  Take care... Peeeaace !!!    

Ps: I said that only port 3074 is used for playin cod and i'm right but why do i put those other 3 ports in hyper traffic then  :P  simply by logic like if your ps4 is talking online while you play like if you don't know it always sync things ;)  so then you don't want to get interferences or spikes because of communications that you don't want to do but need ... so by putting them on hyper just like the cod 3074 port every communication directly linked to your game you playin and also other communications wich you don't even notice or knowing are done on that hyper lane at the same rate your game runs online so no added spikes or jitter or interferences !!!!!!  And yep hyper traffic is the one setting that should really been called Prioritisation cuz that's really what it's doin...!!!

Link to comment
Share on other sites

  • 3 weeks later...

I just think maybe that port 30130 was an internal port being used by upnp as your device had changed its ip resulting in port 3074 not available. Solution would be use the ip address that has already opened up port 3074 you will see which device it is at the upnp page on your gui

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...