toby jugs Posted January 22, 2017 Share Posted January 22, 2017 Hi guys, i have my duma connected again now via ppoe to an ONT on a ftth connection. it's psuedo hardwired at the moment via a trailing cable to the closest power socket that i can get a powerline adaptor to work with on my ps4, this is only a temporary measure until i get someone to hardwire my 2nd floor room where i game from. i get a flatline ping of about 8 ms with no noticable jitter but am suffering from huge spikes every 10 seconds or so which usually go up to 1000ms. considering the size of the spikes it's strange that the game(IW) doesn't seem to be compromised that much but i'm wondering if all the settings i've played around could be optimised to sort this out or not. i had the ps4 previously set up with a static ip and had all the relevant ports open to get an open nat. it's connected via ppoe now and i have dns 8.8.8.8 and secondary dns 8.8.4.4 input in the ps4 network settings(dunno if dns is even relevant tbh) what i'd really like is for somebody to take the wheel at a convenient time and check i have everything set up right for piece of mind sake. Any input appreciated as always! Link to comment Share on other sites More sharing options...
Zennon Posted January 22, 2017 Share Posted January 22, 2017 Try without the power line adaptor if at all possible to diagnose the PLA in or out of the picture. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted January 22, 2017 Administrators Share Posted January 22, 2017 It sounds like a graphical error. Please try what Colonic said here: http://forum.netduma.com/topic/19930-very-high-ms-showing-up-in-the-netduma-lately-cod-iw/?p=137409 Link to comment Share on other sites More sharing options...
toby jugs Posted January 22, 2017 Author Share Posted January 22, 2017 Try without the power line adaptor if at all possible to diagnose the PLA in or out of the picture. the ethernet cable i have won't reach 2 floors but i'll try it on wifi later on to see what happens It sounds like a graphical error. Please try what Colonic said here: http://forum.netduma.com/topic/19930-very-high-ms-showing-up-in-the-netduma-lately-cod-iw/?p=137409 ok i'll try with auto ping off, cheers mate Link to comment Share on other sites More sharing options...
toby jugs Posted January 22, 2017 Author Share Posted January 22, 2017 i tried connecting via wifi. the games are unbelievable smooth but i can't get anything to appear in the geo filter even if i f5 or apply cloud Link to comment Share on other sites More sharing options...
toby jugs Posted January 22, 2017 Author Share Posted January 22, 2017 o.k so no matter what i do the geo filter will not show any hosts whatsoever on a wifi connection so i can't get a ping reading, rebooting, refreshing the page and applying cloud makes no difference. psuedo wired via powerlines(auto ping off) it will only show hosts after a refresh or 2 (could be the incredibly slow interface though), the ping varies from a flatline just below 1000ms on a lot of hosts to spiking up to 1000ms every few seconds on others, this is clearly bullshit because the gameplay is relatively smooth even with the spikes lol. with the new connection problem icons on IW i'm sure i'd being seeing some if these if were true readings. i'm convinced that the antiflood isn't even working on my unit and neither is hyperlane, games play fine if nobody is streaming video but there can be issues if they are... even on 70/70 cc with hyperlane enabled. i'd really like someone to take a look at it remotely to see if they can sort it out please before i start pulling what little hair i have left out lol. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted January 23, 2017 Administrators Share Posted January 23, 2017 Follow this for the map http://support.netduma.com/support/solutions/articles/16000022408-why-can-t-i-see-anything-on-the-geo-filter-do things show up now? Are ALL devices connected to the Netduma? If so then CC will work correctly unless you have super turbo ticked which would disable it. I am happy to do a one on one if my suggestions don't work. Link to comment Share on other sites More sharing options...
toby jugs Posted January 23, 2017 Author Share Posted January 23, 2017 Follow this for the map http://support.netduma.com/support/solutions/articles/16000022408-why-can-t-i-see-anything-on-the-geo-filter-do things show up now? Are ALL devices connected to the Netduma? If so then CC will work correctly unless you have super turbo ticked which would disable it. I am happy to do a one on one if my suggestions don't work. o.k that link explains very well why i can't get anything to show when using wifi, next time i'm gaming i'll add a new device for (ps4 wifi) that also explains why i didn't think hyperlane was working or the CC.also i can then establish if the weird spikes are powerline related or not. Last thing i want to do is waste your time Fraser. i'll report back when i've had a chance to check what's what. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted January 24, 2017 Administrators Share Posted January 24, 2017 Great to hear that, keep us updated Link to comment Share on other sites More sharing options...
toby jugs Posted January 29, 2017 Author Share Posted January 29, 2017 so... i've had a chance to test it on wifi now after adding a new service for my ps4 pro(wifi). i've had one session that didn't spike and two that gave exactly the same results and spikes to exactly the same level as running psuedo wired through powerlines. still getting wifi drop outs too that only seem to affect one of my tv's and my sons wii-u at the moment. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted January 30, 2017 Administrators Share Posted January 30, 2017 Post in the 1 on 1 section: http://forum.netduma.com/forum/66-request-1-on-1/and I will have a look. Please note I need around a days notice. Please read this first before making the post: http://forum.netduma.com/topic/11450-read-before-posting-a-1-on-1-request/ Link to comment Share on other sites More sharing options...
toby jugs Posted January 30, 2017 Author Share Posted January 30, 2017 Post in the 1 on 1 section: http://forum.netduma.com/forum/66-request-1-on-1/and I will have a look. Please note I need around a days notice. Please read this first before making the post: http://forum.netduma.com/topic/11450-read-before-posting-a-1-on-1-request/ Top man Fraser , will do. i'll do it in a couple of days time when i'm not working late though Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.