belly120 Posted October 5, 2016 Posted October 5, 2016 Ok so i'm using my router in bridge mode and my netduma is dialing out, works a treat and everything is happy and seems to be glitch free but...... i'm on a 64 down by 20 up connection, pre this setup i got mid 50 to high 50's down and 17+ up. now i get a solid mid 40's down and 16+ up. its rock steady and stable and fast enough but that is with turbo mode on, if i don't run turbo it drops to mid 20's down. so in the next upgarde will the PPPoE functions get a buff???? also anything i can do now to squeeze a bit more juice out of it?
BIG__DOG Posted October 5, 2016 Posted October 5, 2016 Turbo mode should always be on, deep packet off unless pc gaming, ipv6 off make sure you run reactive......i dont use pppoe as i have my duma running through my isp routers dmz. I get the speeds i should from my isp i get without my netduma or with it but i dont get advertised speeds. Advertised speeds are 80/20 and i get 75/19.
Netduma Staff Netduma Jack Posted October 5, 2016 Netduma Staff Posted October 5, 2016 For your speeds we would recommend this set-up: - Reactive Algorithm - 100% anti-flood - Share excess enabled - Reset device prioritisation & apply - Disable IPv6 in WAN, LAN & misc- Disable deep packet in misc - Ensure the ethernet cables you're using are correct. - Do a wired speed test from a PC Turbo mode shouldn't need to be enabled for your speeds; but then again some connections are different. If it helps then leave it on.
Administrators Netduma Fraser Posted October 6, 2016 Administrators Posted October 6, 2016 Let us know how you get on with the above advice
Recommended Posts
Archived
This topic is now archived and is closed to further replies.