Erik

no, R2 has fixed static L ip in the fritzbox.

port forwarding even though I delete it reappears every time, I don't know why.

this is my situation, all devices are connected to the netduma, fritzbox only broadcasts the network to the R2. The selectors are at 50% because I guarantee myself with that 1% max speed of bufferbload in load of the network, but to be fussy I could also easily bring it to 90% having bufferbloat at 5%

and instead yes if active the first traffic prioritizazion block / bypasses the geofilter not making it work anymore. In fact, if I start the warzone game with the first traffic prioritization ON I no longer see the servers inside the geo filter the pc is added as a play station in the geo filter. When I have desync no, I have nothing stuck in the map. What I noticed through WINMTR is that the netduma briefly goes from 2-3 ms packets to 50-60 and then back to 2..3..4 ms to my ISP. It seems as if it fizzes for a few moments. and my connection is set up correctly via QOS

another question: can the activated geofilter cause a desyn in gama? (the classic problem I shoot first and die first or the fact that it gives you the impression that the enemy sees you before you?) I ask why it would seem but I'm not sure, that without geo filter these anomalies do not exist, and they are almost convinced to be able to confirm it because playing directly from fritzbox the problem does not exist. Thank you

I have already set the qos correctly. I do not use the traffic priority because if I add the PC the geo filter no longer works correctly as I find initial lobbies with ping <90 instead of <15.

make sure you have a deep enough tip to take the reset button and remember to hold it down for at least 30 seconds. must be reset by force.

ok, reset the Mac from netduma everything works fine. one last thing Fraser: I have been noticing for about a week that the problem of desync in game is recurring to me or it seems that the enemy sees me before I see him and consequently seems to have an advantage in hitting me .. in the netduma everything is ok, but , if I connect the pc directly to the fritzbox this does not happen. netduma is in the exposed mode of fritzbox so it has full access to the network without restrictions. where could the problem be? i was thinking of upgrading to xr1000..i think R2 is starting to have some hardware malfunction.

so do you advise me to remove the mac of the fritz from the netduma?

yes I restarted and even reset the netduma, but I came to the conclusion that the R2 has some problems in managing the pppoe because if I put it in cascade to the fritz I get the 950 mb without problems. As for the MAC clone I cannot put the identical one of the fritz, once the fritz itself has been inserted I change the last character of the MAC and then in the netduma I have to insert the MAC that the fritzbox suggests to me.

I connected R2 directly to the ONT. Unfortunately, the speed does not exceed 500 Mb and the non-prioritized packets are still there.

do you think the reason for the non-priority packages is the fault of the fritzbox?

I think I have those non-prioritized packets since I used the MAC clone..I didn't really notice if without Mac clone I had fewer non-prioritized packets. I am sure, however, that with the netduma connected directly to the ONT the non-prioritized packets were at 0 while the prioritized ones went up. I don't understand if the problem is the netduma cascaded to the fritzbox. but from fritzbox the netduma is on high priority ahead of everything.

the reason the clone was used is above. but if you say take it off I'll try and let you know. what I do?

I have no rules in the traffic controller, because as soon as I saw that the geofilter was not working well I removed them immediately. The R2 is connected to the fritzbox 7590 with MAC Address Cloning.

can you explain better fraser? does it mean that i have problems with my ISP? I have no limit in the netduma, but from 2 days I have packet loss even of 15% in game for a few seconds.

good evening, can someone explain to me why I have non-prioritized and 0 over prioritized packages? moreover, is it normal that by putting some rules in the traffic control this I '' deactivates / bypasses '' the geofilter finding me lobbies with high ping? thank you

You have few servers inside that zone. Increase the radius of your geofilter and you will see that you will find lobbies more easily

You are Super Fraser!!! Everything works great again!

I already have these settings except the Ping assist which is set to 35. you say that putting to 0 I solve? it seems to me that the geofilter after a few hours of inactivity sends something in the network into conflict sending me the ping overseas for no reason

I tried. when i have Ping less than 90 from geo filter i only see server in america, for all following games until i reboot. when the router is restarted, however, when looking for games with Ping Less than 17 I see servers inside the geo filter. I'm not home now, but I still have two photos. where you see only the American server is looking for with Ping less than 90, in the other when it finds with Ping less than 17. now the geofilter has 900 km radius and 40 Ping assist

no, after restarting the router I find games with Ping less than 17 and the game is pretty fluid

no never .. I'll give you an example .. last night I had this problem, the shots did not enter, I had small lag .. I restarted the router all ok for the two hours I played. Today I turn on the pc I start the game and the first search starts with a ping lower than 80 .. bad game, the shots did not enter, I was clearly late in the game. I restart the netduma and everything is fine

good evening guys! can someone kindly explain to me why every day I have to restart the router to solve this problem? after a few hours of operation if I quit the game and come back it starts looking for lobbies with high ping. Restarting the router will set itself up. I also tried a reset but didn't fix anything. It almost seems that when logging in, the router '' authenticates '' to the farthest server. Game with geo filter active throughout Europe, I live in Italy.

Super!! THANKS FRASER! last question: my provider says to use VLAN ID 835, being r2 with mac of the fritzbox also active in the netduma the VLAN or do I leave it in OFF?