Erik

I could try, but wouldn't that be too many doors?

Yes sure. in game I ping 15..18 ms, max 30-35 ms.

the problem is that if I have more packages in upload than download I am late in the game .. vice versa everything works great.

I would say excellent, I keep the cursors on 70%, but I could very well raise them to 90, no more, otherwise in Ping under load it begins to rise

the same, and I can't give myself why. I have the ports open only through port forwarding..if I use NAT or DMZ the situation gets worse. my connection is still perfect.

later I provide a screen! I already notice that the difference is great. use as rule 3074: 3074 destination 30000-45000 udp. I still have the same problem even if I only activate "games console"

ok fraser thanks. I have another question though: why in the traffic priority in the QOS - games console item I have few packages in download and many in uploads? shouldn't they be about the same?

ok I will do as you say for sure, I would like to try to remove the 7590 and put R2 in pppoe as the primary router, but I don't understand why it never reaches 950 in download but always and only 650..700. The only thing to bypass this problem is to deactivate the QOS, but I don't think it is healthy to deactivate and activate the QOS

ok, how do i manage the devices in the house then? Do I keep geo filters active on both of them? same thing for the QOS?

Ok fraser thanks. Should I want to connect R2 to xr1000 do I connect it LAN to LAN or LAN to WAN? I would use it to completely manage the upper floor of the house, but I would like the main one to be xr1000 because that's where I connected the pc to play.

these are my results, on xr1000. they are very similar on R2. In QOS I have the cursors at 70%. I do not understand everything because here I see 700 mb in download while in the speedtest on the web it easily detects the 900 megs in download. Beyond this with the cursors at 70% I did a test on dsl report under load I have a ping variation at max of 5 ms, dumaos would automatically leave the cursors at 99% down and 90% up.

I tried to carry out your suggestions, unfortunately I had already set them some time ago from another thread. This morning I was lucky enough to try an xr1000 where I copied exactly the settings of r2 into it. The packet burst problem I had is magically solved. Now I would like to understand why R2 causes that problem, the difference can already be seen in the fluidity of management of the DUMAOS, R2 is much slower in this case than xr1000.

as soon as I get back from work I put everything there. but I can tell you that I have not changed any settings myself added new devices. the sliders are set to 70 and 70 but could easily stay on 100 and 100 without problems. The only thing I can say for sure is that the lag in game decreases if I disable the QOS from the R2 settings. I hope it is not a physical problem of R2, I have the impression that it is not responsive enough in the “parcel analysis” phases to give the right priorities. I can't afford to reset the router, it would be an ordeal for me. lately I notice an "important" use of the r2 cpu in gaming, but I'm using very little bandwidth, just a couple of mega.

good evening guys, for months my netduma r2 has always worked great without problems, however for 2 weeks while playing warzone on the screen I see the orange trangle icon which means packet burst with consequent failure to register the shots and I clearly find myself lagging behind the enemy. I'm afraid my R2 has some package management issues but I don't know what to change as it's always been fine. I normally restart it once every two weeks. R2 is cascaded to fritzbox 7590. If I disconnect the pc from R2 and connect it to 7590, the packet burst problem disappears. All devices are connected to R2 and I have no conenction congestion problems as I have 2.5 gbps fiber. Thanks to those who can help me solve this thing.

the heat map does not show the available warzone servers again

is there any news? the German and Italian servers are not yet visible on the map.

good evening forum! for information I wanted to know if you would add warzone 2 and MW2 to your list of games (beta will be out in days). will you also include servers in the heat map? do you think they will use existing servers such as those of warzone and mw 2019? thank you

my bandwidth is 1000mbps in download and 500mbps in upload..the sliders are set to 70%. A samsung TV is rarely used together with the PC to watch TV series on Netflix but it never exceeds 15-20 mbps. All devices are connected to R2

no..even if i run the re sync cloud many servers are missing to appeal

For two days now the map is no longer showing warzone servers correctly. Do you need an update?

I have the same problem. with qos deactivated the hitregs in game are ok, if activated qos I seem to be lagging behind the enemy..I have qos at 70% down and up, my connection is perfect.

ok thanks, what do you mean by manual rules? i only activated games console in the qos section so in the QOS band manager instead of increasing the percentage in the gaming category I should increase the unknown selector right?

because while I play if I look at the type of traffic generated by my pc in the network mornitoring, it is classified as unknown instead of gaming traffic, and in my opinion it is not given the right priority

Fraser, is it possible to disable DPI on R2? I'm coming to the conclusion that he is the problem.