Nuyorrican

No. I went to Network activity, set it for 1 week and filtered VoIP and it show no activity. When I filter it for my phone and 1 week I only have Uncategorized, VPN, Video & Streaming, Web (General), Work From Home, File Sharing, Chat & Messaging, Cloud Gaming, Gaming.

Just curious then. When I enable Wi-Fi calling under what classification would I see that traffic under Network Activity?

I work from home so I use our corporate VoIP alot. When I setup the router, I made Voip and then Work from Home the top priorities. When I look at VoIP network activity for the span of lets say a week, it states that there is now data. Under work from home it does register data. I was curious if perhaps there might be a problem with VoIP not being prioritized or being recognized by the R3. We use RingCentral and some of the people would mention that my calls sounded distant. I went into settings and added an Internet rule called "RingCentral" and added the ports UDP 5060-5090 for all the devices. So far this looks like it solved the issue. I also enabled Wi-Fi calling on all the cell phones and even though that is working I was expecting that to also be part of the VOIP network statistics. Just an FYI I am running on firmware version 4.0.23 and I reset my configuration after the firmware upgrade. Should the VoIP prioritization recognize the RingCentral app or Wi-Fi calling? Thank you and keep up the good work. Everything else seems to be working great.

Not sure if this was already fixed on the R2 but I currently have the R1 and my family cannot enable WiFi Calling because it does not work on the R1. This is both Android and Apple phones. I've tested it with another third party router and it works. I pre-ordered the R3 but I still wanted to know if WiFi Calling works on the R3. Thank you and keep up the good work. The R3 looks killer.

Just in case I notice a couple of month ago that when you setup a manual connection to the VPN Nord lices you to use a pre-generated username and password that they assign to your account. This can be found by going to the site https://my.nordaccount.com/dashboard/nordvpn/ On the bottom of the page under advanced configuration you will find "Service Credentials" (manual setup). I configured my VPN connection on the DumaOS using these credentials and not my standard username/password. If you move the mouse over the i (information button) it states these credentials are to be used form manual set ups on routers. Hope this helps and please not that the username is nothing compared to the normail username. It looks to be over 22 random characters or more.

I don't don't know why I did not try it before but I just went ahead and disabled UPnP, saved UPnP and then just re-enabled it and saved. I then rebooted my device (not the Netduma but the device that needed UPnP) and UPnP is working again. So for anyone that is not seeing UPnP working after upgrading and performing a factory reset I would suggest to just disable, save, enable, save UPnP. I am no longer getting these errors in the logs "Thu Apr 8 10:51:28 2021 daemon.err miniupnpd[1618]: sendto(udp_shutdown=7): No such device". Hope this helps.

I forgot to mention that I am getting a lot of these errors in the log: Mon Apr 5 10:22:54 2021 daemon.warn odhcpd[944]: Failed to send to ff02::1%br-lan (Operation not permitted) Mon Apr 5 10:22:50 2021 daemon.err miniupnpd[1618]: try_sendto failed to send 12 packets I get more of the miniupnpd errors if anything. Please note that I have DHCP disabled because I use a custom Pi-Hole configuration but this was not an issue in the previous version before. The logs with the previous version were most really clean with minimal errors to show. Everything seems to be working though.

I also noticed similar speed results like e38BimmerFN. 1. QoS Disabled. 510 down, 502 up 2. QoS Enabled - Both sliders at 100% set to Auto-Enable. 250 down, 320 up 3. QoS Enabled - Down at 70% and Up at 70% se to Auto-Enable. 275 down, 325 up These are just averages. I performed multiple speed tests on a PC and also a Apple TV device. Both had very close results. Nothing else was running on the networks. Just like the version before I can only get the max speeds on my network by completely disabling QOS. A new symptom for me is that UPnP does not seem to be working. I have rebooted & restarted my Plex server and it does not register in the LAN/UPnP page. I did the upgrade and performed a factory reset as suggested. I also experienced the same issue as another user that going thru the setup wizard and changing the username/password does not work. I had to manually do it after for the username/password change but it does work.

Just curious. The R1 was not able to obtain full speeds on a Hybrid VPN connection due to hardware limitations. Has this been solved with this new hardware? It would be great if I could get full speeds using my NordVPN connection on the router instead of having to install the app on all the devices. Thanks and keep up the good work. The R2 looks sexy AF.