merthaw Posted November 2 Share Posted November 2 My ISP is Spectrum and I have the R3. I can't seem to configure an open NAT for black ops 6. I'm using a wired connection. Disabling firewalls didn't do anything. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted November 2 Administrators Share Posted November 2 If your ISP modem/router has WiFi, set it up so that it is in bridge or modem mode, you can also use the DMZ. Copy the WAN IP from the R3 (found in Settings > WAN) and enter it into the DMZ function on the ISP modem/router. You should get an Open NAT then. Link to comment Share on other sites More sharing options...
merthaw Posted November 2 Author Share Posted November 2 I'm afraid there's no way to do this. I contacted my ISP who said that the modem (model ET2251) is already in bridge mode and there's no way to access a DMZ function because there's no way to adjust the modem settings. Link to comment Share on other sites More sharing options...
Zippy Posted November 2 Share Posted November 2 The ET2251 is a pure modem only.. It will always have an Open NAT.. its not a router.. Your issue is not the modem.. Its either a setting in your R3 like possibly the Geo filter is blocking or something upnp isnt picking up.. What are you playing on PC? You might have to resort to port forwarding.. Thanks! Zippy. PharmDawgg and Netduma Fraser 2 Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted November 2 Administrators Share Posted November 2 That modem doesn't have WiFi so the rest didn't apply to it, you could ignore what I said. As above, it's also possible you have a CG-NAT. Check with the Geo-Filter disabled and see if it is open then. Link to comment Share on other sites More sharing options...
merthaw Posted November 3 Author Share Posted November 3 Thanks for the replies. As a reminder, this is for Black Ops 6. I tried disabling geo-filter to no avail...still moderate NAT. Any way to open it if this is indeed a CG-NAT? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted November 3 Administrators Share Posted November 3 Yes please follow the CG-NAT section at the bottom of this guide and let us know the results https://support.netduma.com/docs/dumaos-3/open-nat/#cg-nat Link to comment Share on other sites More sharing options...
merthaw Posted November 3 Author Share Posted November 3 I tried this, and whether I am connected directly to my modem or router, I get one line of response, suggesting I do not have a CG-NAT. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted November 3 Administrators Share Posted November 3 Okay that's good, try then manual port forwarding and it should open Link to comment Share on other sites More sharing options...
merthaw Posted November 4 Author Share Posted November 4 I did try that originally and it didn't seem to work. I found a way to put the R3 in DMZ though, and that gave me open NAT. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted November 4 Administrators Share Posted November 4 Could you clarify how you did that? Based on the information provided your setup is the pure modem > R3 is that right? Zippy 1 Link to comment Share on other sites More sharing options...
merthaw Posted November 5 Author Share Posted November 5 Correct. I believe I went into Port Forwarding within the DumaOS GUI, clicked on my device (MSI laptop) and enabled DMZ there. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted November 5 Administrators Share Posted November 5 Okay so you put your PC in the DMZ, not the router, I would not advise that as it is a security risk. Use port forwarding instead, it's safer. Zippy and PharmDawgg 2 Link to comment Share on other sites More sharing options...
merthaw Posted November 6 Author Share Posted November 6 I wasn't able to get an open NAT using port forwarding when I tried it before. Can you point me in the right direction on how to do this? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted November 7 Administrators Share Posted November 7 19 hours ago, merthaw said: I wasn't able to get an open NAT using port forwarding when I tried it before. Can you point me in the right direction on how to do this? You only need 3 rules: Port Range Enter 3074 in both left boxes - Enter 3075 in both right boxes TCP/UDP ---- Enter 27000 in both left boxes - Enter 27037 in both right boxes TCP/UDP ---- Port Enter 4380 in both boxes TCP/UDP Link to comment Share on other sites More sharing options...
merthaw Posted November 9 Author Share Posted November 9 I'm unable to save a port forwarding rule through DumaOS. The save button is grayed out. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted November 9 Administrators Share Posted November 9 7 hours ago, merthaw said: I'm unable to save a port forwarding rule through DumaOS. The save button is grayed out. It's likely you've missed something like entering the rule name, scroll up & down and check everything has been entered Link to comment Share on other sites More sharing options...
II Z IE IR O II Posted November 25 Share Posted November 25 On 11/7/2024 at 6:05 AM, Netduma Fraser said: You only need 3 rules: Port Range Enter 3074 in both left boxes - Enter 3075 in both right boxes TCP/UDP ---- Enter 27000 in both left boxes - Enter 27037 in both right boxes TCP/UDP ---- Port Enter 4380 in both boxes TCP/UDP On 11/7/2024 at 6:05 AM, Netduma Fraser said: You only need 3 rules: Port Range Enter 3074 in both left boxes - Enter 3075 in both right boxes TCP/UDP ---- Enter 27000 in both left boxes - Enter 27037 in both right boxes TCP/UDP ---- Port Enter 4380 in both boxes TCP/UDP Where exactly do I find these settings on Duma OS? my situation is I have the same ISP, same modem, but I have 2 routers. One NETGEAR Orbi Mesh (RB771) and R3. I had the modem, netgear first, then R3. I had open NAT but after a firmware upgrade to Netgear, now on Black Ops 6, it’s moderate NAT. Turned off geo-filter and still moderate NAT. Only fix seems to be is modem, R3 and then Netgear. Only issues is R3 is only a 1Gb port, Modem and Netgear is 2.5Gb port which is limiting my internet speeds to less than 1Gb. i just use my R3 for its geo-filtering capabilities. I want to run my setup as the following: Modem, Netgear, R3 with open NAT on black ops 6. suggestions to get an open nat with my setup that I want? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted November 25 Administrators Share Posted November 25 This would just be the port forwarding section on the R3 and you make those rules as above. If you're on PC that's what you should do. If you can then the R3 should be in the DMZ on the NG router. If you're playing on console then you could put that in the DMZ on the R3 instead of doing those port forwarding rules. Link to comment Share on other sites More sharing options...
II Z IE IR O II Posted November 25 Share Posted November 25 19 minutes ago, Netduma Fraser said: This would just be the port forwarding section on the R3 and you make those rules as above. If you're on PC that's what you should do. If you can then the R3 should be in the DMZ on the NG router. If you're playing on console then you could put that in the DMZ on the R3 instead of doing those port forwarding rules. Swapped everything back to how I originally wanted it, and now it automatically configured itself to have an open NAT. Netduma Fraser 1 Link to comment Share on other sites More sharing options...
merthaw Posted November 28 Author Share Posted November 28 Sorry for the delayed response, but I was finally able to get it to work. Thanks! Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted November 28 Administrators Share Posted November 28 Good to hear, thanks for the update! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now