Slamchez Posted July 4 Share Posted July 4 @Netduma TomNo problem, happy to help. Hope you got more of what you needed. Also, a big thanks to @Netduma Jack Bfor jumping on that call for so long. I know it’s late over there. Rebooting now Achilles 1 Link to comment Share on other sites More sharing options...
Slamchez Posted July 4 Share Posted July 4 Now I'm suddenly getting around 100mbps speeds. 400 was the best I coupled pull on the Mac Jack and I connected directly to the router during our call. Whatever is going on the router is now struggling. Link to comment Share on other sites More sharing options...
Slamchez Posted July 4 Share Posted July 4 Windows is even worse Link to comment Share on other sites More sharing options...
Slamchez Posted July 4 Share Posted July 4 Disregard previous posts, at least for Windows. Found the issue: bad cable. Was not providing gigabit to the switch. Netduma Jack B 1 Link to comment Share on other sites More sharing options...
Administrators Netduma Jack B Posted July 5 Administrators Share Posted July 5 16 hours ago, Proud R3 Owner said: Ipv6 is garbage. We've got some changes coming in the next update. Hopefully it makes some improvments for you! Achilles 1 Link to comment Share on other sites More sharing options...
Proud R3 Owner Posted July 5 Share Posted July 5 3 hours ago, Netduma Jack B said: We've got some changes coming in the next update. Hopefully it makes some improvments for you! No not on the R3 but ipv6 from the ISP are usually icmp filtered so it's pretty garbage anyway. I'm my opinion it's not worth having until ISPs can figure a better way to not filter icmp as much as ip6 is heavily reliant on it. Netduma Jack B 1 Link to comment Share on other sites More sharing options...
Slamchez Posted July 5 Share Posted July 5 Just woke up to an outage. @Netduma Jack Bdo you guys want to remote in again? It looks like it started around 3am my time. Link to comment Share on other sites More sharing options...
Administrators Netduma Jack B Posted July 5 Administrators Share Posted July 5 @SlamchezWe're still investigating at the moment, feel free to reboot for now! Link to comment Share on other sites More sharing options...
Slamchez Posted July 5 Share Posted July 5 Ok, thank you! Link to comment Share on other sites More sharing options...
Administrators Netduma Jack B Posted July 5 Administrators Share Posted July 5 @SlamchezFeel free to reboot over the weekend if you get the same issue, as we wont be in the office. Slamchez 1 Link to comment Share on other sites More sharing options...
Slamchez Posted July 5 Share Posted July 5 @Netduma Jack BAlso, just a couple things I noticed. I never fixed my router log settings from the update and reset. They’re still the default time zone which I believe is yours. We also found a screen a little bit ago on the Xbox that shows data usage. It shows activity until 5am my time and then completely drops off until it was booted at 10am, shortly before I posted. When I get a chance I’ll try and grab a picture. Netduma Jack B 1 Link to comment Share on other sites More sharing options...
Proud R3 Owner Posted July 7 Share Posted July 7 @Netduma Fraser Have any of you duma people been able to reproduce the disconnect issue when connected with a switch? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted July 7 Administrators Share Posted July 7 25 minutes ago, Proud R3 Owner said: @Netduma Fraser Have any of you duma people been able to reproduce the disconnect issue when connected with a switch? I'll have to check in with the team on Monday and see Link to comment Share on other sites More sharing options...
Slamchez Posted July 7 Share Posted July 7 @Proud R3 Owner They spent about three hours total in my router on Thursday and it seems like they got some good information. I just don't know that any of it pertained to the switches. Link to comment Share on other sites More sharing options...
Proud R3 Owner Posted July 8 Share Posted July 8 3 hours ago, Slamchez said: @Proud R3 Owner They spent about three hours total in my router on Thursday and it seems like they got some good information. I just don't know that any of it pertained to the switches. Well I know it's not the switches honestly since they don't affect anything when I use my tp-link archer ax11000 instead of the R3. Link to comment Share on other sites More sharing options...
Achilles Posted July 8 Author Share Posted July 8 23 minutes ago, Proud R3 Owner said: Well I know it's not the switches honestly since they don't affect anything when I use my tp-link archer ax11000 instead of the R3. PIggy-backing off this comment - keeping tabs on this thread but I've still not yet had another disconnect since adjusting the Xbox settings. At this point I'm not sure if the switches are just a coincidence or not. Netduma Jack B 1 Link to comment Share on other sites More sharing options...
Administrators Netduma Jack B Posted July 8 Administrators Share Posted July 8 7 hours ago, Achilles said: PIggy-backing off this comment - keeping tabs on this thread but I've still not yet had another disconnect since adjusting the Xbox settings. At this point I'm not sure if the switches are just a coincidence or not. @SlamchezMight be worth you trying the same thing in your setup as well. Just to see if this helps you out as well Link to comment Share on other sites More sharing options...
Slamchez Posted July 8 Share Posted July 8 I’m definitely going to see if my brother will do this on his. I know mine is already in that state since it’s hardly used. Link to comment Share on other sites More sharing options...
Achilles Posted July 8 Author Share Posted July 8 1 hour ago, Slamchez said: I’m definitely going to see if my brother will do this on his. I know mine is already in that state since it’s hardly used. Just make sure the additional settings are also set up accordingly. You can put it in Shutdown mode but there's still options for it to wake and do checks. Link to comment Share on other sites More sharing options...
Slamchez Posted July 8 Share Posted July 8 3 minutes ago, Achilles said: Just make sure the additional settings are also set up accordingly. You can put it in Shutdown mode but there's still options for it to wake and do checks. Could you let me know what other settings there are? I think I have mine set up accordingly as it never pops on to the network. This way I know both Xboxes are set and we can start after I reboot this time. Achilles 1 Link to comment Share on other sites More sharing options...
Achilles Posted July 8 Author Share Posted July 8 10 hours ago, Slamchez said: Could you let me know what other settings there are? I think I have mine set up accordingly as it never pops on to the network. This way I know both Xboxes are set and we can start after I reboot this time. Sure thing, I'll grab a screenshot tonight and post it here. EDIT: Screenshots uploaded. This is under General > Power Options, then > Customize Power Options for additional changes. I've done this to both Series X's, one which is wired over LAN port, the other has been a mix of both wired via the second switch and over Wifi. Previous settings were using "Sleep" and both "Keep my console up to date" and "Keep my games & apps up to date" were both enabled. Fuzy and Netduma Fraser 2 Link to comment Share on other sites More sharing options...
Slamchez Posted July 12 Share Posted July 12 I did not see this till just now and was just about to post some settings. This is exactly the settings I just changed and will be keeping an eye on the network to see if this one pops up at s for verifying those settings @Achilles Netduma Fraser and Achilles 2 Link to comment Share on other sites More sharing options...
Slamchez Posted July 12 Share Posted July 12 So while I was out we crashed. I just restarted the Xbox and the router and I guess we’ll see how far we get. Link to comment Share on other sites More sharing options...
Slamchez Posted July 12 Share Posted July 12 (edited) FYI these are the settiings on my brothers Xbox and they are exact the same as @Achillesas far as I can tell. I don’t think missed anything. Edited July 12 by Slamchez Spelling Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted July 12 Administrators Share Posted July 12 The turn off options to make them the same you need to switch them to not turn off Achilles 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now