RobertS29 Posted January 2, 2024 Posted January 2, 2024 Ever since I’ve hooked up my R3, my latency on my series X has doubled from Low 20s to high 50s. Just wondering if there’s some troubleshooting I can try? Download and upload speeds have been good.
DARKNESS Posted January 2, 2024 Posted January 2, 2024 If your using steady ping that maybe the cause why your ping seems high you can disable and see if there are any changes.
Administrators Netduma Fraser Posted January 2, 2024 Administrators Posted January 2, 2024 The above could be a reason, other than that where are you measuring the ping?
RobertS29 Posted January 2, 2024 Author Posted January 2, 2024 On cod mw3. I have the feature on where it shows latency in game. With the R3 disconnected I’m around 22-24
Administrators Netduma Fraser Posted January 2, 2024 Administrators Posted January 2, 2024 It'll be Steady Ping, disable that and it will be lower
RobertS29 Posted January 2, 2024 Author Posted January 2, 2024 Are you referring to “ping optimizer”? I don’t see anything that says steady ping on my app
RobertS29 Posted January 2, 2024 Author Posted January 2, 2024 2 minutes ago, RobertS29 said: Are you referring to “ping optimizer”? I don’t see anything that says steady ping on my app Nevermind. I see it under geo
RobertS29 Posted January 2, 2024 Author Posted January 2, 2024 1 hour ago, Netduma Fraser said: It'll be Steady Ping, disable that and it will be lower Disabled it and latency is still mid 40s. With this R3 my NAT type is now moderate and it says double NAT detected? Not sure if that affects anything but prior to this router I was open
Administrators Netduma Fraser Posted January 3, 2024 Administrators Posted January 3, 2024 You'll need to copy the WAN IP from Settings > WAN and put that in the DMZ on your ISP modem/router. Make sure then that ALL devices are connected to the R3. That will help with ping as well. Are you using Congestion Control in Ping Optimizer > Advanced? As that will eliminate local congestion and keep your ping low.
RobertS29 Posted January 4, 2024 Author Posted January 4, 2024 On 1/2/2024 at 7:09 PM, Netduma Fraser said: You'll need to copy the WAN IP from Settings > WAN and put that in the DMZ on your ISP modem/router. Make sure then that ALL devices are connected to the R3. That will help with ping as well. Are you using Congestion Control in Ping Optimizer > Advanced? As that will eliminate local congestion and keep your ping low. It fixed my NAT, that is now open. But my latency is still high which I’m not understanding why it’s higher then the modem from my ISP
Spdsk8race Posted January 4, 2024 Posted January 4, 2024 When you reboot the R3, steady ping turns back on automatically, make sure to go back in and disable it
IIDoomSlayerII Posted January 4, 2024 Posted January 4, 2024 I thought the latency in game is -10ms off to get your actual ping ?
Administrators Netduma Fraser Posted January 4, 2024 Administrators Posted January 4, 2024 16 hours ago, RobertS29 said: It fixed my NAT, that is now open. But my latency is still high which I’m not understanding why it’s higher then the modem from my ISP As above make sure Steady Ping is disabled as in case it re-enabled. What settings are you using for Congestion Control now?
RobertS29 Posted January 4, 2024 Author Posted January 4, 2024 5 hours ago, Netduma Fraser said: As above make sure Steady Ping is disabled as in case it re-enabled. What settings are you using for Congestion Control now? Yup it’s been off. Congestion control is was just changed from auto - always on. With no improvement. Is the R3 just not a good fit with my Xfinity modem? It’s the latest one
TG3NOC1D3 Posted January 4, 2024 Posted January 4, 2024 8 minutes ago, RobertS29 said: Yup it’s been off. Congestion control is was just changed from auto - always on. With no improvement. Is the R3 just not a good fit with my Xfinity modem? It’s the latest one Highly recommend ditching comcast gateway all in one router/wifi with your own Docsis 3.1 modem. I gave my DOCSIS 3.1 modem to my gf's parents for her little brother, then hooked them up with some mesh wi-fi ap's for christmas and they have had way better bandwidth and latency compared to comcraps modem/router combo.
RobertS29 Posted January 4, 2024 Author Posted January 4, 2024 33 minutes ago, TG3NOC1D3 said: Highly recommend ditching comcast gateway all in one router/wifi with your own Docsis 3.1 modem. I gave my DOCSIS 3.1 modem to my gf's parents for her little brother, then hooked them up with some mesh wi-fi ap's for christmas and they have had way better bandwidth and latency compared to comcraps modem/router combo. I’m not against doing that. I’m just confused to why my comcast modem by itself is giving me better numbers then my R3.
TG3NOC1D3 Posted January 4, 2024 Posted January 4, 2024 8 minutes ago, RobertS29 said: I’m not against doing that. I’m just confused to why my comcast modem by itself is giving me better numbers then my R3. It could be the that the way the comcast modem is sending data to the router could be causing a backup in data tbh. Not all devices play well with one another, so all the more reason to get a stand alone modem and let the R3 run your network. Highly recommend either the Netgear CM1000, Arris S33 or the Motorola MB8611. All three of those are more than compatible with Comcast and you should see much better latency as those all in ones are designed for ease of replacement and have super short shelf life lol.
Administrators Netduma Fraser Posted January 5, 2024 Administrators Posted January 5, 2024 What percentages are you using specifically for Congestion Control and do you notice any difference after adjusting them? We usually suggest starting at 70% and experimenting from there
RobertS29 Posted January 5, 2024 Author Posted January 5, 2024 51 minutes ago, Netduma Fraser said: What percentages are you using specifically for Congestion Control and do you notice any difference after adjusting them? We usually suggest starting at 70% and experimenting from there Currently download and upload are at 100%
Administrators Netduma Fraser Posted January 5, 2024 Administrators Posted January 5, 2024 3 hours ago, RobertS29 said: Currently download and upload are at 100% It won't be doing anything at 100 so try 70 and experiment from there and you should notice a difference
RobertS29 Posted January 7, 2024 Author Posted January 7, 2024 On 1/5/2024 at 10:27 AM, Netduma Fraser said: It won't be doing anything at 100 so try 70 and experiment from there and you should notice a difference After changing it to 70, my download speed went from 900 MBPS to 200 and upload went from 70 to 5
Administrators Netduma Fraser Posted January 7, 2024 Administrators Posted January 7, 2024 Do you have speed test bypass enabled? Where are you testing the speeds? Is this over WiFi or ethernet?
RobertS29 Posted January 7, 2024 Author Posted January 7, 2024 9 hours ago, Netduma Fraser said: Do you have speed test bypass enabled? Where are you testing the speeds? Is this over WiFi or ethernet? Nope. I’m testing speeds wired on my Xbox
Administrators Netduma Fraser Posted January 7, 2024 Administrators Posted January 7, 2024 Do a test with a wired PC, do you get expected results then?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now