bossman Posted January 8, 2021 Share Posted January 8, 2021 I'm located in Canada and have a question about putting my geo-filter location in say, Iraq. If I had filtering on, but strict mode off and ping assist to zero, would I connect to servers around Iraq since game would load me into an Iraq/Saudi server or revert back to US? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted January 9, 2021 Administrators Share Posted January 9, 2021 There are no servers in Irag, I think there may only be one server in Saudi. To force you'd need strict on as well as Ping Assist at 0. If you managed to get a server that far away which I doubt you would then the ping would be very high and it wouldn't be a good game experience. Link to comment Share on other sites More sharing options...
bossman Posted January 9, 2021 Author Share Posted January 9, 2021 On 1/9/2021 at 12:04 AM, Netduma Fraser said: There are no servers in Irag, I think there may only be one server in Saudi. To force you'd need strict on as well as Ping Assist at 0. If you managed to get a server that far away which I doubt you would then the ping would be very high and it wouldn't be a good game experience. Expand Right, ok. That explains why I couldn't connect to South Africa/Saudi servers. If I wanted to find lobbies w/ best ping, would I filter w/ location in ocean, strict mode off and ping assist to around 30? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted January 9, 2021 Administrators Share Posted January 9, 2021 On 1/9/2021 at 10:12 AM, bossman said: Right, ok. That explains why I couldn't connect to South Africa/Saudi servers. If I wanted to find lobbies w/ best ping, would I filter w/ location in ocean, strict mode off and ping assist to around 30? Expand Some people do choose to do that yes so definitely try that out. Depending on what firmware version you're on you could use Ping Heatmap to find the lowest pinged servers regardless of where they appear on the map and then set your Geo-Filter accordingly. Link to comment Share on other sites More sharing options...
bossman Posted January 10, 2021 Author Share Posted January 10, 2021 On 1/9/2021 at 1:17 PM, Netduma Fraser said: Some people do choose to do that yes so definitely try that out. Depending on what firmware version you're on you could use Ping Heatmap to find the lowest pinged servers regardless of where they appear on the map and then set your Geo-Filter accordingly. Expand unfortunately I don't have the ping heatmap feature, waiting on update Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted January 10, 2021 Administrators Share Posted January 10, 2021 On 1/10/2021 at 4:51 AM, bossman said: unfortunately I don't have the ping heatmap feature, waiting on update Expand I've given you access, enjoy! https://forum.netduma.com/forum/130-dumaos-30-beta-netduma-r1/ Link to comment Share on other sites More sharing options...
designerema Posted January 10, 2021 Share Posted January 10, 2021 On 1/10/2021 at 12:52 PM, Netduma Fraser said: I've given you access, enjoy! https://forum.netduma.com/forum/130-dumaos-30-beta-netduma-r1/ Expand can i get access for my xr300 ive been waiting for ever to try ping heat map Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted January 10, 2021 Administrators Share Posted January 10, 2021 On 1/10/2021 at 4:21 PM, designerema said: can i get access for my xr300 ive been waiting for ever to try ping heat map Expand It's not currently available for the 300 but we are working on it! Link to comment Share on other sites More sharing options...
bossman Posted January 10, 2021 Author Share Posted January 10, 2021 On 1/10/2021 at 12:52 PM, Netduma Fraser said: I've given you access, enjoy! https://forum.netduma.com/forum/130-dumaos-30-beta-netduma-r1/ Expand Oh, that's very awesome of you! Am I good to upgrade to 3.0.171 straight from 2.1.3.29? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted January 10, 2021 Administrators Share Posted January 10, 2021 On 1/10/2021 at 10:09 PM, bossman said: Oh, that's very awesome of you! Am I good to upgrade to 3.0.171 straight from 2.1.3.29? Expand Yes you're absolutely safe to do so, would recommend doing a factory reset after you have upgraded as there are a lot of changes. Link to comment Share on other sites More sharing options...
bossman Posted January 11, 2021 Author Share Posted January 11, 2021 On 1/10/2021 at 10:27 PM, Netduma Fraser said: Yes you're absolutely safe to do so, would recommend doing a factory reset after you have upgraded as there are a lot of changes. Expand Done 🙌 I have an issue tho. It says filtering mode is not supported for the game. I've setup my device again, which is a PC, and I chose Call of Duty (PC Only). Do I need to just choose "Call of Duty" instead of "Call of Duty (PC Only)" as the game? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted January 11, 2021 Administrators Share Posted January 11, 2021 On 1/11/2021 at 12:34 AM, bossman said: Done 🙌 I have an issue tho. It says filtering mode is not supported for the game. I've setup my device again, which is a PC, and I chose Call of Duty (PC Only). Do I need to just choose "Call of Duty" instead of "Call of Duty (PC Only)" as the game? Expand Remove that from the Geo-Filter then in the Device Manager give the PC a PlayStation device type, then re-add it to the Geo-Filter and select the manual option, you will then be able to filter the game on the PC. Link to comment Share on other sites More sharing options...
bossman Posted January 12, 2021 Author Share Posted January 12, 2021 On 1/11/2021 at 12:50 PM, Netduma Fraser said: Remove that from the Geo-Filter then in the Device Manager give the PC a PlayStation device type, then re-add it to the Geo-Filter and select the manual option, you will then be able to filter the game on the PC. Expand Hi Since upgrading to 3 my nat type on the game is still moderate even tho I added the ports again. I was also disconnected from mw servers just now, not sure if that's on their end or not. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted January 12, 2021 Administrators Share Posted January 12, 2021 On 1/12/2021 at 9:24 PM, bossman said: Hi Since upgrading to 3 my nat type on the game is still moderate even tho I added the ports again. I was also disconnected from mw servers just now, not sure if that's on their end or not. Expand What's your exact physical setup? How have you setup your modem/router to get an Open NAT through the router? If it happens again quickly look at the Geo-Filter and see if there is anything that appears blocked. Link to comment Share on other sites More sharing options...
bossman Posted January 13, 2021 Author Share Posted January 13, 2021 On 1/12/2021 at 10:31 PM, Netduma Fraser said: What's your exact physical setup? How have you setup your modem/router to get an Open NAT through the router? If it happens again quickly look at the Geo-Filter and see if there is anything that appears blocked. Expand ISP modem/router is in bridge/modem only mode. PC and WiFi devices are connected to the R1. I have UPNP enabled and have added the Warzone ports in DumaOS. I'm not using Geo-Filter currently and have removed the device. It appears MW/WZ servers are having issues. NAT is still moderate, not a big deal I suppose. Link to comment Share on other sites More sharing options...
Netduma Liam Posted January 13, 2021 Share Posted January 13, 2021 On 1/13/2021 at 1:14 AM, bossman said: ISP modem/router is in bridge/modem only mode. PC and WiFi devices are connected to the R1. I have UPNP enabled and have added the Warzone ports in DumaOS. I'm not using Geo-Filter currently and have removed the device. It appears MW/WZ servers are having issues. NAT is still moderate, not a big deal I suppose. Expand That's interesting, which ports have you forwarded for CoD? Are there any other devices/users on your network that are playing Warzone at the same time? Link to comment Share on other sites More sharing options...
CDNY18 Posted January 13, 2021 Share Posted January 13, 2021 On 1/10/2021 at 4:36 PM, Netduma Fraser said: It's not currently available for the 300 but we are working on it! Expand Hi is the Ping Heatmap available for the XR500? Edit: I've found a link to the Beta and installed it Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted January 13, 2021 Administrators Share Posted January 13, 2021 On 1/13/2021 at 4:08 PM, CDNY18 said: Hi is the Ping Heatmap available for the XR500? Edit: I've found a link to the Beta and installed it Expand Hey, welcome to the forum! As you've found it's present on the beta, any questions let us know! Link to comment Share on other sites More sharing options...
bossman Posted January 13, 2021 Author Share Posted January 13, 2021 On 1/13/2021 at 2:19 PM, Netduma Liam said: That's interesting, which ports have you forwarded for CoD? Are there any other devices/users on your network that are playing Warzone at the same time? Expand idk, the ones listed on blizzards website for warzone? no others devices. I'm not worried about it anymore right now, I have a bigger issue now.. Can I just pm somebody for help? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted January 13, 2021 Administrators Share Posted January 13, 2021 On 1/13/2021 at 9:18 PM, bossman said: idk, the ones listed on blizzards website for warzone? no others devices. I'm not worried about it anymore right now, I have a bigger issue now.. Can I just pm somebody for help? Expand We get a lot of PMs and it wouldn't give faster support. If you post here we can help. Link to comment Share on other sites More sharing options...
bossman Posted January 14, 2021 Author Share Posted January 14, 2021 On 1/13/2021 at 9:36 PM, Netduma Fraser said: We get a lot of PMs and it wouldn't give faster support. If you post here we can help. Expand ok, well it seems my speeds are inconsistent and when under heavyish load, my wifi craps out.. just going to unplug the r1 and use my isp's modem/router.. can't be bothered to deal with it Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted January 14, 2021 Administrators Share Posted January 14, 2021 On 1/14/2021 at 5:20 PM, bossman said: ok, well it seems my speeds are inconsistent and when under heavyish load, my wifi craps out.. just going to unplug the r1 and use my isp's modem/router.. can't be bothered to deal with it Expand Could you expand further? What speeds do you pay for/expect? What speeds are you getting via WiFi? What are your WiFi settings? Link to comment Share on other sites More sharing options...
bossman Posted January 15, 2021 Author Share Posted January 15, 2021 On 1/14/2021 at 5:27 PM, Netduma Fraser said: Could you expand further? What speeds do you pay for/expect? What speeds are you getting via WiFi? What are your WiFi settings? Expand Pay for 60 down and 10 up and got about 72 up/12 down on speedtest prior to setting up r1 router. Download speed now starts around 25mb and creeps up to 40-60mb, very inconsistent. This is on my PC connected via ethernet. Same thing happens via WiFi but a bit slower speeds obviously. This never happened before. WiFi settings are just as is from factory, I just set ssid/password. Link to comment Share on other sites More sharing options...
Netduma Liam Posted January 15, 2021 Share Posted January 15, 2021 On 1/15/2021 at 1:30 AM, bossman said: Pay for 60 down and 10 up and got about 72 up/12 down on speedtest prior to setting up r1 router. Download speed now starts around 25mb and creeps up to 40-60mb, very inconsistent. This is on my PC connected via ethernet. Same thing happens via WiFi but a bit slower speeds obviously. This never happened before. WiFi settings are just as is from factory, I just set ssid/password. Expand Could you run a connection benchmark on the R1 and provide a screenshot of the results? Link to comment Share on other sites More sharing options...
bossman Posted January 15, 2021 Author Share Posted January 15, 2021 On 1/15/2021 at 11:33 AM, Netduma Liam said: Could you run a connection benchmark on the R1 and provide a screenshot of the results? Expand I've attached a pic of the benchmark and a pic from speedtest.net bc it utilizes multi connections and shows true performance.. Before using the R1 my speeds never dropped below 62mb when doing a test on speedtest.net. I was downloading a 1.4GB file the other day on my PC at like 3mb/sec (usually get 6+mb/sec) and the WiFi crapped out. Also happened when trying to stream to YouTube and dropped a huge amount of frames. I have all settings factory on the router. I'm going to try a factory reset right now. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.