Kostas83 Posted January 23, 2020 Share Posted January 23, 2020 Hi everyone! Of course I want to have the best settings on my XR500 and the best performance! So I am trying to figure it out what I should do... I read that we have to avoid the double NAT when are setup is modem/router from ISP and a second router. In my case is the XR500. I found 2 ways to do that. One is PPPoE pass through and the other way to set DMZ. Right now I have it PPPoE and I confirm that I have public WAN IP like 91.xxx.xxx.xx instead 192.168.1.10 or 10.0.0.1. But generally I read on the forum that the most people use the DMZ way... So my question is which way I must choose... Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted January 23, 2020 Administrators Share Posted January 23, 2020 There is no way that you have to choose, if it is working fine as it is then there is no need to change it. Some people prefer to use the DMZ but you only need to do that if you're encountering issues with the XR500 handling PPPoE. Link to comment Share on other sites More sharing options...
BIG__DOG Posted January 24, 2020 Share Posted January 24, 2020 @Kostas83 hope your quiery was answered to your satisfaction, I will now close this thread. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.