sgtmajorsav Posted November 18, 2017 Share Posted November 18, 2017 so I'm taking out the NetDuma from retirement, but i'm running into problems again. i hooked up the netduma to my modem/router from my isp. i put the netduma in the DMZ, but i'm still getting xbox one saying i'm strict, and UPnP not successful... what am i doing wrong? now it's saying NAT type: Unavailable and underneath (all on xbox one) saying xbox,com/xboxone/Teredo if anyone can help me out with even getting the netduma to connect the xbox one to the internet i would greatly appreciate it. Link to comment Share on other sites More sharing options...
pollutionblues Posted November 18, 2017 Share Posted November 18, 2017 Make sure that your geo-filter is disabled before running the NAT test. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted November 18, 2017 Administrators Share Posted November 18, 2017 Did you put the correct IP in the DMZ? The WAN IP from the R1 device manager? Disable UPnP & port forwarding on the ISP router. Disable upnp forwarding in R1 miscellaneous settings Only use UPnP or port forwarding on the R1 not both Then do above Link to comment Share on other sites More sharing options...
sgtmajorsav Posted November 18, 2017 Author Share Posted November 18, 2017 Did you put the correct IP in the DMZ? The WAN IP from the R1 device manager? Disable UPnP & port forwarding on the ISP router. Disable upnp forwarding in R1 miscellaneous settings Only use UPnP or port forwarding on the R1 not both Then do above so after last night (before the replies) i just factory restarted my netduma. i figured i would start from scratch. the xbox is now saying the following Current Network Status Wired IPv4 & IPv6 Nat Type: Strict Double NAT Detected xbox.com/xboxone/DoubleNat All services are available the device manager in netduma is still showing it's detected another router, but the WAN ip address i tried putting in the DMZ, but not sure if it's working properly with my ISP router. i'll probably have to call and see if it is or not. once i put the netduma in the DMZ this should work, correct? i also disabled geo filter, and disabled upnp forwarding in settings--> mis Link to comment Share on other sites More sharing options...
Netduma Staff Netduma Jack Posted November 20, 2017 Netduma Staff Share Posted November 20, 2017 so after last night (before the replies) i just factory restarted my netduma. i figured i would start from scratch. the xbox is now saying the following Current Network Status Wired IPv4 & IPv6 Nat Type: Strict Double NAT Detected xbox.com/xboxone/DoubleNat All services are available the device manager in netduma is still showing it's detected another router, but the WAN ip address i tried putting in the DMZ, but not sure if it's working properly with my ISP router. i'll probably have to call and see if it is or not. once i put the netduma in the DMZ this should work, correct? i also disabled geo filter, and disabled upnp forwarding in settings--> mis If you put the WAN IP into the DMZ section on the modem, you should technically not have this error as the double NAT would, at that point, be solved. If it is still stating that you have a strict NAT, make sure you're connected via Ethernet on the Xbox and remove the Netduma from your setup completely. Do you still get a strict NAT even without the Netduma connected? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.