Jump to content

Recommended Posts

Turned off xbox.

 

Turned it back on back to moderate...

 

Bloody thing

Hey I'm going to advise something that's usually not recommended but it works for me for some reasons and I have two console on at the same time. 

 

On the HUB make sure the Netduma is in the DMZ. Next on the Netduma, make sure UPNP is ticked. Now second, as it's not recommended but for whatever reasons it works for me. Go to portforwarding on the Netduma and put in the port 3075 TCP&UDP and port 3076 TCP&UDP. I know these are the ports for the xbox as it differs for only needing one port on the PS4 which is 3074 UDP but I just put 3074 TCP&UDP which I use on my PS4 only. I get open NAT. 

No need for opening a second COD game before opening back up IW for the port to be recognized. 

Link to comment
Share on other sites

Thanks I'm back to open Nat at the moment.

 

Not sure if the issue was the second xbox 1 being turned on or the fact I saved a link on my phone to the netduma and that link reactivated the port forwarding.

 

Fingers crossed

Link to comment
Share on other sites

You might try setting a static IP for 1 of your xbox's and manually port forward to that xbox.If your router's handing out dynamic IP addy's and your xbox's IP is changing all the time depending on what other devices are activated first,then you could port forward to your xbox and while your on it will be open but when you shut it off and go to log back in the next day some other device may have the IP that you port forwarded to the previous day.

 

This happened to a friend and we set a static IP and he's had an open NAT ever since.This may or may not apply to your situation but may be worth a try if your IP is changing to your xbox all the time.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...