Aspect of Wrath Posted February 9 Share Posted February 9 I have been losing connection to the router login (192.168.77.1) every day or two at random times for 3 weeks, i would usually notice this because my ping is low in game which means steady ping is not working due to my ping not being 5 or 10 higher. I read on the forums that it might be SmartBoost causing it so i disabled that, day later router crashes again. After reading about other peoples similar issues in the forums I finally got the router to work without it crashing while the smartboost is active, i found that these 3 are causing crashes. DMZ on a device, leaving steady ping on too long and logging in dumaos using r3 wifi. I deleted my dmz device, use steady ping only when gaming then turning it off after im done, i turned off R3 wifi and used another router on AP mode as wifi to access dumaOS with my phone, no crashes since i changed these settings. If your router stops working and you cannot login router can you please post what default settings you have changed. lg2021 1 Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 9 Administrators Share Posted February 9 Thanks a lot for posting about this, well done for figuring out what seems to be causing it for you, I will pass this onto the team to see if they can reproduce the issue with this information Aspect of Wrath 1 Link to comment Share on other sites More sharing options...
Aspect of Wrath Posted February 9 Author Share Posted February 9 This is the longest i had the router not crash on me, next week if all is well i am going to test things out by leaving steady ping on to see if it crashes, then dmz, after that wifi. I want to test out if steady ping is possibly causing high cpu on certain isp's and crashing, upnp opening the same ports as device in dmz may also cause crashes. I have a feeling that logging in DumaOS using the R3 wifi is the main issue but before i turn that on again i am going to see if the router stays on this week. Router works great in COD and once this annoying bug is fixed next firmware the R3 will be perfect. Netduma Fraser 1 Link to comment Share on other sites More sharing options...
BatmanX Posted February 10 Share Posted February 10 This seems to be exactly what is happening to me. I disabled smartboost but still experience the crashes. It usually happens when I am done gaming and go back to gaming and use the MacBook Air to see the geo filter and ping. how can i use my other router to log into the r3 if my WiFi is disabled? AP mode? Thx. Link to comment Share on other sites More sharing options...
Aspect of Wrath Posted February 10 Author Share Posted February 10 What i did is use another router in AP mode for wifi for now until bug is fixed. This kept the R3 from crashing for me it has been 5 days now, before it would crash everyday randomly. Im curious is there a setting you changed from default that may affect router? Maybe try a different electrical outlet when powering router. Link to comment Share on other sites More sharing options...
BatmanX Posted February 10 Share Posted February 10 It has done this from day one. I didn’t change anything even after factory reset I will try a different outlet tho if I disable WiFi can I still log into the r3? i use my isp router for the rest of my house just r3 for gaming Link to comment Share on other sites More sharing options...
Aspect of Wrath Posted February 10 Author Share Posted February 10 I believe everything that uses internet has to be connected to the R3 for the anti bufferbloat to work, also if your isp is a modem/router you have to put it in bridge mode or put R3 in your modem/routers DMZ. You do not want double nat on R3, games will lag and ports will not open. Yes you can use ethernet to access router no need to use R3 wifi if its crashing or attach ethernet from R3 to another router in AP mode and use that routers wifi. PharmDawgg and Netduma Fraser 2 Link to comment Share on other sites More sharing options...
fabigas Posted February 10 Share Posted February 10 Same issue with My r3 at beginning. i weht back to Firmware 4.023 and everything ok now. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 10 Administrators Share Posted February 10 24 minutes ago, fabigas said: Same issue with My r3 at beginning. i weht back to Firmware 4.023 and everything ok now. Thanks for letting us know, the team are looking into it fabigas 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now