Network speed

[kevin88230]

Hello, the network speed is not working, do you know why, I restarted the netduma to factory but still the same

[idvizual]

Turn off IPV6 LAN and WAN if you haven't yet. Its worked for me when testing on waveform.

[kevin88230]

je vais essayer ce soir,  Modifications must be made on the netduma or modem

[Netduma Fraser]

You can try the IPv6 suggestion but we are aware the test isn't always accurate, you can manually change the speeds

[kevin88230]

The speeds are already manually set to 100 mbps and 50 mbps but during the test it does not take them into account for me

[kevin88230]

If I deactivate netduma's IPv6 I no longer have a connection and I cannot deactivate it on my provider's modem

[DanologyUK]

2 hours ago, kevin88230 said:

The speeds are already manually set to 100 mbps and 50 mbps but during the test it does not take them into account for me

If you set the speeds manually, you dont need to run the test. 

[kevin88230]

Yes but during the test the speeds recorded manually are not taken into account

[kevin88230]

My internet speed is not limited

[Netduma Fraser]

You don't need to do the test if you're setting the speeds manually

[kevin88230]

I'm trying to get an A+ on bufferbload but the stream recorded manually on the netduma is not taken into account during my tests on my xbox

[Krush]

Tu es chez quel opérateur ?

Tu dois forcément avoir un accès ipv4… donc même en désactivant IPv6 wan et lan sur le R3, tu garderas un accès internet.

Pour que le test fonctionne sur Xbox avec la limitation de vitesse… tu dois te mettre sur always et désactiver les vitesses max au niveau de ping optimiser !

 

[kevin88230]

Thanks I will try this evening @Flou

[kevin88230]

Problem solved thanks for your help

[Espi411]

6 minutes ago, kevin88230 said:

Problem solved thanks for your help

what was the issue lol cause when i disable the ipv6 stuff my wifi stops working but ethernet still works and i get A+ that way but when i turn them back on it goes back to c sometimes b 

[Netduma Fraser]

7 minutes ago, Espi411 said:

what was the issue lol cause when i disable the ipv6 stuff my wifi stops working but ethernet still works and i get A+ that way but when i turn them back on it goes back to c sometimes b 

The connection should re-establish itself after disabling, if not then reboot and you should be good.

[Espi411]

1 minute ago, Netduma Fraser said:

The connection should re-establish itself after disabling, if not then reboot and you should be good.

i thought the same thing but when they re connected it was connected with no internet access so when everyones asleep and im gaming i just turn them off in the morning i turn them back on so people can use the wifi not that big of an issue imo but can be annoying if you forget n everyone is like wtf why the wifi out lmao yall doing good stuff keep it up 

[kevin88230]

1)I returned the netduma to the factory 2) I set the download value 3) I disable IPv6 on LAN and WAN in advanced mode 4) I restarted the netduma

[kevin88230]

[Netduma Fraser]

1 hour ago, Espi411 said:

i thought the same thing but when they re connected it was connected with no internet access so when everyones asleep and im gaming i just turn them off in the morning i turn them back on so people can use the wifi not that big of an issue imo but can be annoying if you forget n everyone is like wtf why the wifi out lmao yall doing good stuff keep it up 

That's really strange, what phones are they exactly?

1 hour ago, kevin88230 said:

1)I returned the netduma to the factory 2) I set the download value 3) I disable IPv6 on LAN and WAN in advanced mode 4) I restarted the netduma

Good results, well done!

[Espi411]

12 hours ago, Netduma Fraser said:

That's really strange, what phones are they exactly?

Good results, well done!

iPhone/Samsung same with Alexa and my tvs as well as tablets  

[Netduma Fraser]

For the phones/tablets, if you disable the Random/Private MAC addresses option for the WiFi when you're connected does it continue to happen?