kevin88230 Posted February 7 Share Posted February 7 Hello, the network speed is not working, do you know why, I restarted the netduma to factory but still the same Link to comment Share on other sites More sharing options...
idvizual Posted February 8 Share Posted February 8 Turn off IPV6 LAN and WAN if you haven't yet. Its worked for me when testing on waveform. Link to comment Share on other sites More sharing options...
kevin88230 Posted February 8 Author Share Posted February 8 je vais essayer ce soir, Modifications must be made on the netduma or modem Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 8 Administrators Share Posted February 8 You can try the IPv6 suggestion but we are aware the test isn't always accurate, you can manually change the speeds Link to comment Share on other sites More sharing options...
kevin88230 Posted February 8 Author Share Posted February 8 The speeds are already manually set to 100 mbps and 50 mbps but during the test it does not take them into account for me Link to comment Share on other sites More sharing options...
kevin88230 Posted February 8 Author Share Posted February 8 If I deactivate netduma's IPv6 I no longer have a connection and I cannot deactivate it on my provider's modem Link to comment Share on other sites More sharing options...
DanologyUK Posted February 8 Share Posted February 8 2 hours ago, kevin88230 said: The speeds are already manually set to 100 mbps and 50 mbps but during the test it does not take them into account for me If you set the speeds manually, you dont need to run the test. Link to comment Share on other sites More sharing options...
kevin88230 Posted February 8 Author Share Posted February 8 Yes but during the test the speeds recorded manually are not taken into account Link to comment Share on other sites More sharing options...
kevin88230 Posted February 8 Author Share Posted February 8 My internet speed is not limited Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 8 Administrators Share Posted February 8 You don't need to do the test if you're setting the speeds manually Link to comment Share on other sites More sharing options...
kevin88230 Posted February 9 Author Share Posted February 9 I'm trying to get an A+ on bufferbload but the stream recorded manually on the netduma is not taken into account during my tests on my xbox Link to comment Share on other sites More sharing options...
Fuzy Posted February 9 Share Posted February 9 Tu es chez quel opérateur ? Tu dois forcément avoir un accès ipv4… donc même en désactivant IPv6 wan et lan sur le R3, tu garderas un accès internet. Pour que le test fonctionne sur Xbox avec la limitation de vitesse… tu dois te mettre sur always et désactiver les vitesses max au niveau de ping optimiser ! Netduma Fraser and kevin88230 2 Link to comment Share on other sites More sharing options...
kevin88230 Posted February 9 Author Share Posted February 9 Thanks I will try this evening @Flou Netduma Fraser 1 Link to comment Share on other sites More sharing options...
kevin88230 Posted February 9 Author Share Posted February 9 Problem solved thanks for your help Netduma Fraser 1 Link to comment Share on other sites More sharing options...
Espi411 Posted February 9 Share Posted February 9 6 minutes ago, kevin88230 said: Problem solved thanks for your help what was the issue lol cause when i disable the ipv6 stuff my wifi stops working but ethernet still works and i get A+ that way but when i turn them back on it goes back to c sometimes b Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 9 Administrators Share Posted February 9 7 minutes ago, Espi411 said: what was the issue lol cause when i disable the ipv6 stuff my wifi stops working but ethernet still works and i get A+ that way but when i turn them back on it goes back to c sometimes b The connection should re-establish itself after disabling, if not then reboot and you should be good. Link to comment Share on other sites More sharing options...
Espi411 Posted February 9 Share Posted February 9 1 minute ago, Netduma Fraser said: The connection should re-establish itself after disabling, if not then reboot and you should be good. i thought the same thing but when they re connected it was connected with no internet access so when everyones asleep and im gaming i just turn them off in the morning i turn them back on so people can use the wifi not that big of an issue imo but can be annoying if you forget n everyone is like wtf why the wifi out lmao yall doing good stuff keep it up Link to comment Share on other sites More sharing options...
kevin88230 Posted February 9 Author Share Posted February 9 1)I returned the netduma to the factory 2) I set the download value 3) I disable IPv6 on LAN and WAN in advanced mode 4) I restarted the netduma Link to comment Share on other sites More sharing options...
kevin88230 Posted February 9 Author Share Posted February 9 Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 9 Administrators Share Posted February 9 1 hour ago, Espi411 said: i thought the same thing but when they re connected it was connected with no internet access so when everyones asleep and im gaming i just turn them off in the morning i turn them back on so people can use the wifi not that big of an issue imo but can be annoying if you forget n everyone is like wtf why the wifi out lmao yall doing good stuff keep it up That's really strange, what phones are they exactly? 1 hour ago, kevin88230 said: 1)I returned the netduma to the factory 2) I set the download value 3) I disable IPv6 on LAN and WAN in advanced mode 4) I restarted the netduma Good results, well done! kevin88230 1 Link to comment Share on other sites More sharing options...
Espi411 Posted February 10 Share Posted February 10 12 hours ago, Netduma Fraser said: That's really strange, what phones are they exactly? Good results, well done! iPhone/Samsung same with Alexa and my tvs as well as tablets Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 10 Administrators Share Posted February 10 For the phones/tablets, if you disable the Random/Private MAC addresses option for the WiFi when you're connected does it continue to happen? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now