CaSpA Posted December 16, 2023 Posted December 16, 2023 Just set up the R3 and everything has gone so smoothly, I love it already. However, every time I’ve tried to run the Ping Optimizer it fails after some time trying. Any suggestions on things to try and get this to complete? thanks!
CaSpA Posted December 16, 2023 Author Posted December 16, 2023 18 minutes ago, DARKNESS said: @CaSpAIt broken feature as of currently so you'll just have to wait for the patch Thanks! I’ll hang tight
Administrators Netduma Fraser Posted December 16, 2023 Administrators Posted December 16, 2023 If it can't ping the server it may fail, if you try again a few times does it work at all?
CaSpA Posted December 16, 2023 Author Posted December 16, 2023 4 hours ago, Netduma Fraser said: If it can't ping the server it may fail, if you try again a few times does it work at all? I’ve tried it maybe 8 times and it has failed every time. I can test my ping without issue, but when I try the optimization it fails after maybe 30 seconds.
BL4CK OPS V3TRN Posted December 16, 2023 Posted December 16, 2023 same here , loving the R3 so far but the optimiser is not working
Administrators Netduma Fraser Posted December 16, 2023 Administrators Posted December 16, 2023 For Ping Optimiser if it fails after 3 tries please provide this information: What country are you in? What connection settings are you using? PPPoE, IPv6, VLAN etc? Anything else you think could be relevant PharmDawgg and CaSpA 2
CaSpA Posted December 16, 2023 Author Posted December 16, 2023 4 hours ago, Netduma Fraser said: What connection settings are you using? PPPoE, IPv6, VLAN etc I apologize for not knowing this but how do I tell which connection setting I have?
Administrators Netduma Fraser Posted December 16, 2023 Administrators Posted December 16, 2023 12 minutes ago, CaSpA said: I apologize for not knowing this but how do I tell which connection setting I have? No worries, did you have to enter any information into the router to get an internet connection? If not don't worry about that part. If you're posting from a device connected to the R3 right now I can see that you do use IPv6
CaSpA Posted December 16, 2023 Author Posted December 16, 2023 37 minutes ago, Netduma Fraser said: No worries, did you have to enter any information into the router to get an internet connection? If not don't worry about that part. If you're posting from a device connected to the R3 right now I can see that you do use IPv6 I did not enter any information, just plugged it all in and I am posting from a connected device so my answers to the questions would be: 1. United States 2. IPv6 3. nothing else to add other than everything else seems to be working to my knowledge. thanks!
Administrators Netduma Fraser Posted December 16, 2023 Administrators Posted December 16, 2023 That's brilliant thank you very much, we'll be looking into it asap!
Deasha Posted December 18, 2023 Posted December 18, 2023 I’m having the exact same issue. Tried 20 times in the past 2 days and every test failed to optimize. 1. Australia 2. DHCP 3. IPV6 turned off at WAN & LAN CaSpA 1
Deasha Posted December 18, 2023 Posted December 18, 2023 I managed to get it working by doing a resync to geofilter, ping heat map, device manager and adblocker. I then disabled add blocker. I think the culprit was add blocker
Deasha Posted December 18, 2023 Posted December 18, 2023 I have noticed that the ping optimizer only test for 100% even if I have selected 70% manually in advance settings. Is this functioning correctly?
Administrators Netduma Fraser Posted December 18, 2023 Administrators Posted December 18, 2023 5 hours ago, Deasha said: I managed to get it working by doing a resync to geofilter, ping heat map, device manager and adblocker. I then disabled add blocker. I think the culprit was add blocker Thank you for that, I've passed that onto the team to see if we can reproduce it. 5 hours ago, Deasha said: I have noticed that the ping optimizer only test for 100% even if I have selected 70% manually in advance settings. Is this functioning correctly? Ping Optimizer will do a test and determine what it thinks is the best percentage for you to reduce your ping the most. You changing the percentage manually is you telling the router what to use rather than using the Ping Optimizer results.
Damiano Calafiore Posted December 18, 2023 Posted December 18, 2023 Salve ,la migliore impostazione per la gestione congestion control ?simple opp exspert?Per entrambe le funzioni per trovare il set giusto utilizzando rilevatore di attimizzazione aut,bisogna spuntare olways per una corretto risultato oppure lasciare normalmente Auto ?se possibile un aiuto per il corretto funzionamento grazie !!
Administrators Netduma Fraser Posted December 18, 2023 Administrators Posted December 18, 2023 È compito tuo sperimentare, entrambi daranno buoni risultati. Le opzioni che hai menzionato di seguito sono se desideri regolare manualmente il Controllo della congestione, mentre il test dell'ottimizzazione del ping lo farebbe automaticamente
Recommended Posts