Jump to content

R2 DPI BUG DUMAOS CLASSIFIED RUNNING BACKROUND EVEN WHEN DISABLED


DARKNESS
 Share

Recommended Posts

AS THE TITLE STATES HERE FOOTAGE

I also talked about it before running on certain devices particularly newer phones if R2 thinks it a port of any kind categorized on the list it enables itself that would be my best guess though i did report back then something called Bigbluebutton etc this is the reason I told the newbie to stay on the other firmware since it opening ports without authorization.

I think I posted about this before etc forget just adding footage

To add I also had everything disabled same result depending on the device you use it might not activate just to clarify but it clearly a bug

 

 

Link to comment
Share on other sites

14 minutes ago, DARKNESS said:

AS THE TITLE STATES HERE FOOTAGE

I also talked about it before running on certain devices particularly newer phones if R2 thinks it a port of any kind categorized on the list it enables itself that would be my best guess though i did report back then something called Bigbluebutton etc this is the reason I told the newbie to stay on the other firmware since it opening ports without authorization.

I think I posted about this before etc forget just adding footage

To add I also had everything disabled same result depending on the device you use it might not activate just to clarify but it clearly a bug

 

 

It could potentially be a bug. But, I also believe this is may have to do with how similar geo-filter works in after disabling it. It usually takes about 30-60 seconds for it to actually take into account of the settings. It also could be longer than that but definitely less than 3 minutes. With that said, one thing I usually do when I see the service is still showing the Download and Upload packets being  prioritized after disabling the service. As unfortuante as it is, a simple reboot of the router will ensure that the service is no longer prioritizing. Disable, Reboot, check the QOS/Traffic Prioritisation, and it should be off. Start up the game and watch the Traffic Prioritization and see if DumaOS still lights up or not. 

Yes, one shouldn't have to do all this. But, hiccups happens. This just sometimes happens.

Hopefully this works for you.

Link to comment
Share on other sites

19 minutes ago, TrayDay said:

It could potentially be a bug. But, I also believe this is may have to do with how similar geo-filter works in after disabling it. It usually takes about 30-60 seconds for it to actually take into account of the settings. It also could be longer than that but definitely less than 3 minutes. With that said, one thing I usually do when I see the service is still showing the Download and Upload packets being  prioritized after disabling the service. As unfortuante as it is, a simple reboot of the router will ensure that the service is no longer prioritizing. Disable, Reboot, check the QOS/Traffic Prioritisation, and it should be off. Start up the game and watch the Traffic Prioritization and see if DumaOS still lights up or not. 

Yes, one shouldn't have to do all this. But, hiccups happens. This just sometimes happens.

Hopefully this works for you.

I've had everything disabled for a several days don't know what family members watching shouldn't matter for the most part since it shouldn't be opening the ports my man I ain't a noob I've done factory reset it still results to the same data shown. Could be something conflicting though that ain't my job to figure out I know they're adding smart qos on top of that but that like adding more bugs on top of new ones if they're not fixed. I did test while everything was disabled so there ain't much to it of course it takes time to show up but that all depends upon devices and what they're watching so as stated above it opening ports.

Link to comment
Share on other sites

7 minutes ago, DARKNESS said:

I've had everything disabled for a several days don't know what family members watching shouldn't matter for the most part since it shouldn't be opening the ports my man I ain't a noob I've done factory reset it still results to the same data shown. Could be something conflicting though that ain't my job to figure out I know they're adding smart qos on top of that but that like adding more bugs on top of new ones if they're not fixed. I did test Geofilter disabled that didn't do anything. 

Yeah, it's something that should be further inspected. It's hit or miss with these as users, we can only do so much. They are making progresss with these issues as I do know for a while there was an IPv6 issue.

Someone from the Netduma team should be able to chime in on this matter more.

Link to comment
Share on other sites

  • Administrators

QoS/Traffic Prioritization doesn't open ports, it just prioritizes traffic, UPnP, Port Forwarding/Triggering/DMZ are the only settings where the status of a port is changed.

This can happen if you're already on a game for example and it's actively prioritizing, it can still prioritize when disabled until that connection is severed. It won't be an issue on SmartQoS though.

Link to comment
Share on other sites

Just now, TrayDay said:

Yeah, it's something that should be further inspected. It's hit or miss with these as users, we can only do so much. They are making progresss with these issues as I do know for a while there was an IPv6 issue.

Someone from the team should be able to chime in on this matter more.

Well I know Ipv6 is an issue known for a while that why it typically recommended to just use ipv4 I don't personally see any difference so I can't speak

Link to comment
Share on other sites

5 minutes ago, Netduma Fraser said:

QoS/Traffic Prioritization doesn't open ports, it just prioritizes traffic, UPnP, Port Forwarding/Triggering/DMZ are the only settings where the status of a port is changed.

This can happen if you're already on a game for example and it's actively prioritizing, it can still prioritize when disabled until that connection is severed. It won't be an issue on SmartQoS though.

It hard to tell when can add ports so why is it you can add ports in there as well if it supposed to be on port forwarding? Thanks for the clarification

Link to comment
Share on other sites

  • Administrators
40 minutes ago, DARKNESS said:

It hard to tell when can add ports so why is it you can add ports in there as well if it supposed to be on port forwarding? Thanks for the clarification

Traffic uses ports so in order to allow people to prioritize literally anything that's why we allow people to prioritize ports. Services such as Games Console is an easy way for the end user to prioritize a group of ports that a games consoles uses.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...