bagsta69 Posted July 17, 2015 Share Posted July 17, 2015 Hi Yall, I ve noticed that for the last 2 days my windows 7 PC will only connect to the web via WIFI, When I open up the networking centre my Wifi is connected to Home Network but my wired connection is set to public and will not give me access to the web wired. I have tried everything to change the wired settings to home with no luck, including deleting all networks. When I click on the icon (public network) it doesnt even give me the option to change it to Home network but it gives me all the possibilites on wifi. Any ideas on how to fix this as obviously when uploading files to picture libraries etc it will be much faster wired. Link to comment Share on other sites More sharing options...
Zennon Posted July 17, 2015 Share Posted July 17, 2015 https://support.microsoft.com/en-us/kb/2578723 or http://www.dummies.com/how-to/content/how-to-change-a-network-type-in-windows-7.html Let me know if your still having trouble. Link to comment Share on other sites More sharing options...
bagsta69 Posted July 17, 2015 Author Share Posted July 17, 2015 Cheers mate I'll have a look at that after me dinner , Link to comment Share on other sites More sharing options...
bagsta69 Posted July 17, 2015 Author Share Posted July 17, 2015 Nope, I am afraid neither of those processes work. I can get wireless to work fine but my lan just says it is an unidentified network and will not allow internet access even when I have made it my home network. I have changed nothing on my hardware for this to have occurred. I dont think it can be the powerline plugs as my ps4 still works fine. Link to comment Share on other sites More sharing options...
Zennon Posted July 17, 2015 Share Posted July 17, 2015 Have you tried a different Ethernet cable? Could also be a DHCP issue turn off all devices and reboot the router that is affecting this. Turn on the machine that is giving you the trouble once the router is up. If this works turn on the rest of the devices. Link to comment Share on other sites More sharing options...
bagsta69 Posted July 17, 2015 Author Share Posted July 17, 2015 Ok Ill give that a go mate. It is not the cable as when I unplug it from the switch it reports that it is not connected then when I plug it back in it recognises it but will only see it as an unrecognised network, I only use the R1 stright into my BT open reach modem. Link to comment Share on other sites More sharing options...
Zennon Posted July 17, 2015 Share Posted July 17, 2015 I did a bit of reading about this earlier and in with the earlier fixes i posted , some people were having this issue because DHCP was not handing out the correct ip addresses. Link to comment Share on other sites More sharing options...
bagsta69 Posted July 17, 2015 Author Share Posted July 17, 2015 I have tried making a whole new network but my pc cannot even see the R1 to connect to it other than on wifi. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted July 17, 2015 Administrators Share Posted July 17, 2015 Can you go on to the adapter settings for IPv4 on the wired connection to point to the R1 address in the gateway part and see if that works please Link to comment Share on other sites More sharing options...
Zennon Posted July 17, 2015 Share Posted July 17, 2015 Thats right click on the network icon by the time, click open network and sharing center click change adaptor settings Right click on the adaptor icon click properties , double click ipv4. Link to comment Share on other sites More sharing options...
bagsta69 Posted July 17, 2015 Author Share Posted July 17, 2015 Ok and where do I find those Fraser? If I disconnect from wifi and try to connect to R1 UI wired uisng web browser I cannot connect to it. Link to comment Share on other sites More sharing options...
bagsta69 Posted July 17, 2015 Author Share Posted July 17, 2015 Ahh ok Cheers Zennon. Link to comment Share on other sites More sharing options...
bagsta69 Posted July 17, 2015 Author Share Posted July 17, 2015 Nope that doesn't work either. Its as if the pc sees the network but says you are not going to play with it. It refuses to recognize the Netduma R1 on a wired connection. Instead it says that I can connect to it but it is unidentified and will not allow web access. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted July 17, 2015 Administrators Share Posted July 17, 2015 Before you changed what I just suggested, were they all set to automatic? Link to comment Share on other sites More sharing options...
bagsta69 Posted July 17, 2015 Author Share Posted July 17, 2015 yes including dns Link to comment Share on other sites More sharing options...
bagsta69 Posted July 17, 2015 Author Share Posted July 17, 2015 Playstation wont connect now either so just trying to reset all power plugs. I do recall actually last night after finishing gaming I got booted out of server but thought nothing of it. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted July 17, 2015 Administrators Share Posted July 17, 2015 Very strange indeed, definitely power cycle bt and R1. Disconnect all devices, R1 off, bt off, wait 30 seconds, bt on, plug in duma via ethernet, wait 30secs-1min then turn R1 on and connect your devices to R1 again. Link to comment Share on other sites More sharing options...
bagsta69 Posted July 17, 2015 Author Share Posted July 17, 2015 Done all that and rebuilt power line network, now I have r1 wifi connection, wired unrecognised network both saying I have Internet access but neither actually allowing me access. On the plus side ps4 working fine Link to comment Share on other sites More sharing options...
Zennon Posted July 17, 2015 Share Posted July 17, 2015 Try a system restore on the machine you are having this trouble with. Link to comment Share on other sites More sharing options...
bagsta69 Posted July 17, 2015 Author Share Posted July 17, 2015 Ok I think I got it, I plugged laptop direct into R1 to eliminate any problems with that and it was fine and recognised it via ethernet no problem. Re synched powerline plugs but still no dice. So I disabled the Lan adapter and the wifi adapter on my pc and switched em back on again. It recognised and allowed me to set My PC as home network and home group. All sorted for now but f##k me what a pain in the ass that was. Thank you very much for all your help guys. Link to comment Share on other sites More sharing options...
Zennon Posted July 17, 2015 Share Posted July 17, 2015 Nice one mate Link to comment Share on other sites More sharing options...
bagsta69 Posted July 17, 2015 Author Share Posted July 17, 2015 Please feel free to close or delete. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.