Jump to content

geofilter Not working on fifa 22


fabigas

Recommended Posts

Hallo netduma Team, 

seit ein paar Tagen funktioniert der geofilter nicht mehr. Es wird selten bis nie der gegnerische Spieler oder der Server auf der Karte gezeigt. Zudem wird der autoping nicht gestartet und ich sehe die connection zum Gegner/ Server nicht. 

auch wenn ich das filtern deaktiviere und ein Spiel suche, zeigt er mir nichts auf der Karte an. 

was kann ich tun und wo liegt der Fehler? 

habe die aktuellste Firmware. 

 

Grüße 

Link to comment
Share on other sites

  • Administrators

Do this and then see if it works please:

  1. Quit the game completely - so go back to console dashboard
  2. Remove device from the Geo-Filter
  3. Resync from the Geo-Filter Map menu
  4. Re-add the device to the Geo-Filter with the manual option
  5. Set up the Geo-Filter how you like
  6. Wait 2 minutes
  7. Boot up game
Link to comment
Share on other sites

  • Administrators

Do you ever remove the device from the Geo-Filter and only add it back when the console/game is on? If so that would explain why icons don't always appear. Another potential could be if you leave your console in an instant on/power saving state, then powering it on may not trigger the Geo-Filter to detect that it is properly online

Link to comment
Share on other sites

Could you please do the following:

  1. Remove the console from Geo-filter
  2. Power off the console and disconnect it's ethernet cable
  3. Go to Device Manager and click the PS5
  4. Delete the PS5
  5. Power the PS5 back on and reconnect ethernet cable
  6. Re-add it to Geo-filter

Let us know if this resolves the problem.

Link to comment
Share on other sites

yeah i reset after Update to 3.0. 394

so it worked for the First days.. after plug in the ethernet again and delete in device Manager IT worked for few games.. than IT crashed again after adjusting the polygon Mode. 

Link to comment
Share on other sites

  • Administrators

So you reserved an IP for it on the router? What MTU are you using? DMZ could cause it potentially as it does pass traffic straight through to the console. Can you remove it from that and use default MTU, restart the console and see whether it works please?

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...