Exe_uz Posted August 10, 2021 Share Posted August 10, 2021 I'm using ping plotter to check ping, but my ping to HOP1 - R2 192.168.77.1 is on average 1.7 m/s is this correct? If not, is there a way of reducing this? FYI Virgin Media - SH3 in modem mode. Link to comment Share on other sites More sharing options...
RedBull2k Posted August 10, 2021 Share Posted August 10, 2021 the device your using to do the pingplotter you can try ethernet. also reduce the interval to 2.5seconds Link to comment Share on other sites More sharing options...
Exe_uz Posted August 10, 2021 Author Share Posted August 10, 2021 Thanks for info, but i am using ethernet and interval at 2.5 seconds. I also think i was generous with the 1.7ms its more like 2.1m/s Link to comment Share on other sites More sharing options...
RedBull2k Posted August 10, 2021 Share Posted August 10, 2021 try a reboot. Link to comment Share on other sites More sharing options...
Netduma Liam Posted August 11, 2021 Share Posted August 11, 2021 10 hours ago, Exe_uz said: Thanks for info, but i am using ethernet and interval at 2.5 seconds. I also think i was generous with the 1.7ms its more like 2.1m/s Good suggestion above, if that hasn't helped I'd also suggest trying a different ethernet cable just in case. Link to comment Share on other sites More sharing options...
Exe_uz Posted August 11, 2021 Author Share Posted August 11, 2021 It's gone up to 3 m/s now, i've also used a new CAT 8 cable 😞 Link to comment Share on other sites More sharing options...
Netduma Liam Posted August 11, 2021 Share Posted August 11, 2021 10 minutes ago, Exe_uz said: It's gone up to 3 m/s now, i've also used a new CAT 8 cable 😞 Do you have any other devices you could connect to the R2 via ethernet? I'm interested as to whether this is reproduceable on another device. Link to comment Share on other sites More sharing options...
Exe_uz Posted August 11, 2021 Author Share Posted August 11, 2021 Unfortunately not Link to comment Share on other sites More sharing options...
Netduma Liam Posted August 11, 2021 Share Posted August 11, 2021 44 minutes ago, Exe_uz said: Unfortunately not Ah OK - can you connect directly to the modem and repeat the same test? Link to comment Share on other sites More sharing options...
RedBull2k Posted August 11, 2021 Share Posted August 11, 2021 10 hours ago, Exe_uz said: Unfortunately not plug your normal hub in and try that just to see what results are Link to comment Share on other sites More sharing options...
Exe_uz Posted August 12, 2021 Author Share Posted August 12, 2021 Plugged it straight into the VM router, now say 0.5 m/s thanks 👍 Link to comment Share on other sites More sharing options...
Netduma Liam Posted August 12, 2021 Share Posted August 12, 2021 50 minutes ago, Exe_uz said: Plugged it straight into the VM router, now say 0.5 m/s thanks 👍 Just to be clear, you plugged the R2 into the VM router and now all is good? Link to comment Share on other sites More sharing options...
Exe_uz Posted August 12, 2021 Author Share Posted August 12, 2021 No i plugged the ethernet cable into the VM hub as you suggested Link to comment Share on other sites More sharing options...
Netduma Liam Posted August 12, 2021 Share Posted August 12, 2021 45 minutes ago, Exe_uz said: No i plugged the ethernet cable into the VM hub as you suggested OK so we know that couple of ms is caused by DumaOS. I don't think this will actually have any effect on your gameplay, but if you want to we can dig into what might be causing the additional delay. Revert back to your previous setup and try completely disabling QoS from the three-line menu in Congestion Control, then re-test. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.