qLofty Posted February 9, 2021 Share Posted February 9, 2021 Hello, So my main internet provider is Verizon FIOS. I cannot put their gateway into bridge mode, but i disable the WiFi on that gateway and DMZ the IP of my XR1000 router and have uPnP enabled on the Fios Gateway. My computer is hardwired in the XR1000, with uPnP enabled, all Ports forwarded for Call of Duty PC, and even DMZed my Computer on the XR1000. In the WAN Settings i have the NAT Filtering set to Open as well. No matter what i have tried, Nat type shows Moderate in Call of Duty. I have tried removing the geo-filter, i have tried adding a trafic controller to allow everything all times of the day. Still cannot get it to Open. When i hardwire directly to my Fios Gateway and use the Port forwarding/DMZ my computers internal IP, i get an Open Nat Type. But I cannot get one when i am hardwired to the XR1000. Any thoughts? What might i be missing? Since i cannot put the Gateway in bridge mode as it does not offer it. My XR1000 is assigned an 10.0.0.1 gateway to access the admin settings rather than the 192 IP, since this is used by the FIOS gateway. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 9, 2021 Administrators Share Posted February 9, 2021 Hey, welcome to the forum! You've got way too many port related settings enabled all at the same time. Please just try the following: Disable UPnP on the gateway Remove DMZ on XR Remove Port Forwarding rules on XR Leave NAT Filtering on Open Then see if you get an open NAT. It is very likely to be a misreading and it will not negatively impact your game experience. Link to comment Share on other sites More sharing options...
qLofty Posted February 10, 2021 Author Share Posted February 10, 2021 Thank you for the response. I gave this a go. Removed uPnP on the gateway, removed the DMZ of the XR1000, Removed the Port Forwarding and had Nat Filtering as Open. Still shows up moderate without the geo filter on. Link to comment Share on other sites More sharing options...
Netduma Liam Posted February 10, 2021 Share Posted February 10, 2021 OK so it's showing as being moderate in game right? How is this affecting your in-game experience? Are you struggling to get into lobbies? It's possible as Fraser said that it's just misreading and it's not actually having an affect on your experience. Link to comment Share on other sites More sharing options...
qLofty Posted February 10, 2021 Author Share Posted February 10, 2021 Recently with geo filter on i have been struggling to find games if I used the standard mark rather than the polygon mode. I had it set to overlap two servers in that showed the best ping on the ping map but it would take forever to connect, but last week was connecting instantly. I switched it to the Polygon mode drew around a few more server and put my PC as 'playstation' as well. Seems to be connecting more. Also when i try to add Call of Duty-PC it says filtering mode is not supported for this game. Link to comment Share on other sites More sharing options...
Nalsano_ Posted February 10, 2021 Share Posted February 10, 2021 42 minutes ago, qLofty said: Merci pour votre réponse. J'ai essayé. Suppression de uPnP sur la passerelle, suppression de la DMZ du XR1000, suppression de la redirection de port et filtrage Nat comme ouvert. Apparaît toujours modéré sans le filtre géographique activé. upnp of the xr500 does not work on pc again a bug of the xr500, on xr1000 i don't Know, use the forward ports;) Link to comment Share on other sites More sharing options...
Netduma Liam Posted February 10, 2021 Share Posted February 10, 2021 29 minutes ago, qLofty said: Recently with geo filter on i have been struggling to find games if I used the standard mark rather than the polygon mode. I had it set to overlap two servers in that showed the best ping on the ping map but it would take forever to connect, but last week was connecting instantly. I switched it to the Polygon mode drew around a few more server and put my PC as 'playstation' as well. Seems to be connecting more. Also when i try to add Call of Duty-PC it says filtering mode is not supported for this game. OK great, changing the PCs device type to Playstation is a good idea, good work! That should mean Geo-filter works much better for you. Could you also confirm what version you're currently using? Link to comment Share on other sites More sharing options...
qLofty Posted February 10, 2021 Author Share Posted February 10, 2021 2 hours ago, Netduma Liam said: OK great, changing the PCs device type to Playstation is a good idea, good work! That should mean Geo-filter works much better for you. Could you also confirm what version you're currently using? Using the XR1000 version: 1.0.0.52_1.0.38. Have my PC set to DMZ on the WAN setup and have tried disabling uPnP and removing the port forwards. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 10, 2021 Administrators Share Posted February 10, 2021 4 hours ago, qLofty said: Thank you for the response. I gave this a go. Removed uPnP on the gateway, removed the DMZ of the XR1000, Removed the Port Forwarding and had Nat Filtering as Open. Still shows up moderate without the geo filter on. Sorry I didn't mean remove the DMZ for the XR on the gateway but rather remove the PC from the DMZ. Link to comment Share on other sites More sharing options...
qLofty Posted February 10, 2021 Author Share Posted February 10, 2021 3 hours ago, Netduma Fraser said: Sorry I didn't mean remove the DMZ for the XR on the gateway but rather remove the PC from the DMZ. What about using the port forwarding then or traffic controller for the device? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 10, 2021 Administrators Share Posted February 10, 2021 31 minutes ago, qLofty said: What about using the port forwarding then or traffic controller for the device? I would just keep UPnP and NAT Open enabled on the XR - remove Traffic Controller rules. Link to comment Share on other sites More sharing options...
qLofty Posted February 13, 2021 Author Share Posted February 13, 2021 An update: I switched my router setup so that the internet comes into the XR1000 first from FiOS rather than the FiOS gateway and then have the XR1000 running an ethernet cord to Fios Gateway's WAN port with all its Wi-Fi and broadcast disabled, so my set top boxes work. This also removing the double NAT was running behind. I see everything on the DumaOS Dashboard. I have my PC hardwired into the XR1000. I have uPnP on, yet doesn't show anything in the uPnP port map table, Geo Filter off, and still get a moderate NAT through the XR1000. I tried disabling uPnP and DMZing my computer in the XR1000 as well and still have Nat Moderate. (Geo Filter is not on). When i check in Modern Warfare, shows my internal IP as 192.xxx.x.xxx:3074. But the XR1000 IP address is the 10.0.0.1. EDITING: double checked wiring and i still have PC plugged into the Fios Gateway, which explains the 192 IP in warzone. After correcting the wires. have an OPEN Nat type running through the XR1000. Thank you for all the help. Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 13, 2021 Administrators Share Posted February 13, 2021 Well done on getting that all sorted and thank you for the update. Glad it's all working now! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.