Doubt test open ports

[albert dh]

Hello,

I am testing open ports and they are always closed. I don't know if it's my problem or I don't know how to do the test correctly. 

The software of XR500 that I have used is the beta Dumaos 3.0 104

Tests that I have done:

My configuration:  ONT Huawei HG8240h --> XR500 --> Switch S8000 --> Computer

XR500:  I have used NAT (OPEN), UPNP, DMZ to IP of computer, Port Forwaring (Port 8889) and Port Triggering (Port 9000).

Switch S8000:  Enable UPNP

Computer: disable Firewall

After these individual tests and all together then I enter in the page: https://www.yougetsignal.com/tools/open-ports/ or https://www.whatsmyip.org/port-scanner/ and I test the ports 8889 and 9000 and they always appear CLOSED.

¿They should not appear open at any time? ¿Am I doing something wrong?

Thanks for helping

 

[Newfie]

If you post on Netgears Beta forum other users there can help and if it’s a problem it helps both Netgear and Netduma to be aware of the issue.

[Netduma Fraser]

As above would be very helpful. Also likely because you're doing it from your PC that is behind a managed switch and not direct to the router.

[albert dh]

Hello Fraser,

I have connected the pc directly to the router and the same thing happens.

Thank you

[albert dh]

1 hour ago, Newfie said:

If you post on Netgears Beta forum other users there can help and if it’s a problem it helps both Netgear and Netduma to be aware of the issue.

Thank you.  I will open a new post in netgear forum