Jump to content

Can't access router at all


Buster

Recommended Posts

Posted

Hi, im having the same issue as in this thread - i have tried holding down the reset button for 25 seconds and the power light doesn't so much as flicker.

 

  • Administrators
Posted

Do any of the lights appear lit on the router? Can you see the WiFi network on your devices? What happens when you try to access the interface via 192.168.77.1 or http://dumaos?

Posted

Power light is lit constantly, and if i am connected to port 4, port 4 occasionally flickers.

When i try to connect to 192.168.77.1, the page tries to load then i see "Your connection was interrupted"

When i try to connect to http://Dumaos i see a no internet message. 

I tried to factory reset by holding down the reset button on the back of the R2 for 25 seconds and the power light did not flicker at all.

I have gone into network settings and changed my laptops IP to 192.168.77.2,  Subnet mask 255.255.255.0, and made the default gateway 192.168.77.1 and then tried connecting to 192.168.77.1 and http://Dumaos again but no luck

Posted

I have the same issue..i unplugged my r2..plugged it back in and tried pressing the button in on different angles and it finally worked

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...