DarkCentauri777 Posted February 24, 2018 Share Posted February 24, 2018 First, when trying to deny peer connections, which are common when you are in a lobby awaiting a match to start, when I hit deny, I leave the lobby and the game connects me back to the same connection. I have verified this by matching the id. Second, when searching for matches, a lot of times the game won't find any matches. I have to go to the Geo Filter screen, and re apply the Call of Duty profile and it will work. Sometimes I only have to do it 1-2 times a day, sometimes several. It does not matter if I have friends in my party or not. I'm on the Hotfix firmware v. 2.20. Link to comment Share on other sites More sharing options...
Administrators Netduma Admin Posted February 24, 2018 Administrators Share Posted February 24, 2018 First, when trying to deny peer connections, which are common when you are in a lobby awaiting a match to start, when I hit deny, I leave the lobby and the game connects me back to the same connection. I have verified this by matching the id. There is a deliberate, two minute delay between you applying a deny rule and it taking effect. This is to prevent cheating (imagine if you used it to boot someone from your game). If you wait a couple of minutes you should not be able to connect to them again Also - remember that if the lobby is hosted by another connection (e.g. a server), denying a peer will not block that lobby or block that peer connecting to it. Deny is used to prevent a bad peer from hosting a lobby again Second, when searching for matches, a lot of times the game won't find any matches. I have to go to the Geo Filter screen, and re apply the Call of Duty profile and it will work. Sometimes I only have to do it 1-2 times a day, sometimes several. It does not matter if I have friends in my party or not. It sounds like you have been setting your range too small. After clicking the Call of Duty profile, what distance have you been setting your radius to? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 24, 2018 Administrators Share Posted February 24, 2018 What's the full firmware version are you on? I'm not aware of that version. Link to comment Share on other sites More sharing options...
DarkCentauri777 Posted February 24, 2018 Author Share Posted February 24, 2018 There is a deliberate, two minute delay between you applying a deny rule and it taking effect. This is to prevent cheating (imagine if you used it to boot someone from your game). If you wait a couple of minutes you should not be able to connect to them again Also - remember that if the lobby is hosted by another connection (e.g. a server), denying a peer will not block that lobby or block that peer connecting to it. Deny is used to prevent a bad peer from hosting a lobby again It sounds like you have been setting your range too small. After clicking the Call of Duty profile, what distance have you been setting your radius to? Okay, I misunderstood what that does, so that's good to know. Thank you. As for the second I usually set it for about 400-500 miles. The profile defaults to 717 miles. I live in the southern United States (Texas). If i set it higher, I risk getting connected to servers in Mexico which, in my experience, do not have the same quality internet as in the US. Link to comment Share on other sites More sharing options...
DarkCentauri777 Posted February 24, 2018 Author Share Posted February 24, 2018 What's the full firmware version are you on? I'm not aware of that version. Sorry for the confusion.. The full version is V2.2.0.7-RC2 Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 24, 2018 Administrators Share Posted February 24, 2018 Okay, I misunderstood what that does, so that's good to know. Thank you. As for the second I usually set it for about 400-500 miles. The profile defaults to 717 miles. I live in the southern United States (Texas). If i set it higher, I risk getting connected to servers in Mexico which, in my experience, do not have the same quality internet as in the US. Yeah so that is smaller than we recommend. A way around that is to just move your location higher up so you still get your state within the radius and exclude Mexico. Link to comment Share on other sites More sharing options...
DarkCentauri777 Posted February 24, 2018 Author Share Posted February 24, 2018 Yeah so that is smaller than we recommend. A way around that is to just move your location higher up so you still get your state within the radius and exclude Mexico. Okay, so maybe I don't fully understand how the Geo Filter works as well. It is my understanding that the Geo Filter will attempt to connect you to the closest server whether it be peer or dedicated based on where you set your home location. Is this accurate? As an example, if I set my home location in order to prevent connecting outside the US, I would need to move my home location about 700 miles north (to the state of Kansas). If I do this, will I not then be connecting to servers there first instead of where I am actually physically located in Houston, TX? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 24, 2018 Administrators Share Posted February 24, 2018 Okay, so maybe I don't fully understand how the Geo Filter works as well. It is my understanding that the Geo Filter will attempt to connect you to the closest server whether it be peer or dedicated based on where you set your home location. Is this accurate? Because if I set my home location in order to prevent connecting outside the US, I would need to move my home location about 700 miles north (to the state of Kansas). If I do this, will I not then be connecting to servers there first instead of where I am actually physically located in Houston, TX? Correct. That isn't very far in networking terms, cross country you definitely want to avoid. I'd recommend setting it like this (I used the R1 map for this pic): It's a 717 miles radius, includes Texas in it's entirety and some surrounding states, close enough for a good connection. The options are all there for you to play around with and find what works for you. Link to comment Share on other sites More sharing options...
DarkCentauri777 Posted February 24, 2018 Author Share Posted February 24, 2018 Correct. That isn't very far in networking terms, cross country you definitely want to avoid. I'd recommend setting it like this (I used the R1 map for this pic): Screen Shot 2018-02-24 at 15.55.40.png It's a 717 miles radius, includes Texas in it's entirety and some surrounding states, close enough for a good connection. The options are all there for you to play around with and find what works for you. Okay, I'll give that a go.. thank you. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.