Jump to content

problem


Recommended Posts

Posted

so ever since i had port forwarding i had nat type open but till today it went back to moderate all day and i don't whats going on 

Posted

omg i spend all day trying to see what happen till you told me about that ur life saver thank you 
can i know what it cased that ?

  • Netduma Staff
Posted

so ever since i had port forwarding i had nat type open but till today it went back to moderate all day and i don't whats going on 

 

Read these instructions this to get an open NAT. The bullet points under 'Why is my NAT still not open?' may be worth you checking.

Posted

When I get home I'll give these a try and I have Xbox my port forwarding was name Xbox

 

Start 3075

End. 3076

And my ip for the Xbox. and it was working fine

Posted

Did you check the link out that Crossy posted ?

 

At the bottom it tells you how to get an open NAT on XBOX

 

You can also go to portforward.com and manually forward the required ports for the game your playing.

  • Netduma Staff
Posted

It's my Xbox over all have strict now And yes I did everything

 

Did you disable the GeoFilter before starting the game?

Posted

Under host filtering on the host filtering page your console will be listed, beneath it are 2 check boxes, show hosts and enabled. Untick enabled.

Posted

It's my Xbox over all have strict now And yes I did everything

Did you set a static IP on your XBOX before you manually forwarded the ports ?

Posted

I don't think so how would I do that

When I had open net type all I did it port forwarding from my r1 and it worked but now it's not

Posted

Go to portforward.com and it will tell you how to go about setting a static IP and give you the correct ports for the game your playing.

 

Just be sure to go to settings on your duma and untick the box on the UPNP page and then click apply,do this first before going to portward.com

  • Administrators
Posted

NAT:
Existing router/modem in modem mode or Netduma WAN IP from device manager in DMZ section.
UPnP & port forwarding disabled on existing router/modem.
UPnP OR port forwarding enabled on the netduma, not both.
Un tick UPnP forwarding in miscellaneous settings.

Boot up the console. Does console network settings say NAT Type 1/2 or open?

Posted

I got it fixed last night thank all of you for the help and now I have net type back to open I was resting everything but wasn't working at first but when I unplugged everything and plugged it back it start working again.

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...