toby jugs Posted November 11, 2016 Share Posted November 11, 2016 hi guys , am trying to set up my ps4 pro. it says mod nat type? my duma can't find it and i cannot delete my old ps4 from the flower cant set up service or hyper lane. infact i can't do shite. please help guys! Link to comment Share on other sites More sharing options...
MrRelentlessUK Posted November 11, 2016 Share Posted November 11, 2016 You might need to reboot or factory reset the Duma, so you can delete your old PS4 Link to comment Share on other sites More sharing options...
toby jugs Posted November 11, 2016 Author Share Posted November 11, 2016 i got everything sorted apart from the nat type now. have tried disabling the filter and resetting the ps4 but no joy yet Link to comment Share on other sites More sharing options...
toby jugs Posted November 11, 2016 Author Share Posted November 11, 2016 now my nat is strict. i thought the duma automatically sorted an open nat?????????????????????????? Link to comment Share on other sites More sharing options...
MrRelentlessUK Posted November 11, 2016 Share Posted November 11, 2016 Make sure you port forward or use UPnP, If you do then disable reboot the Duma enable them, Plus always power down the PS4 are pull the power cable out wait a minute and power back on Link to comment Share on other sites More sharing options...
toby jugs Posted November 11, 2016 Author Share Posted November 11, 2016 cheers i will try that Link to comment Share on other sites More sharing options...
ProJect_GT82 Posted November 11, 2016 Share Posted November 11, 2016 I had the same last night... Put your PS4 Pro in your Hyperlane and Port forward your PS4 Pro port 3074. Sorted! Link to comment Share on other sites More sharing options...
Netduma Staff Netduma Jack Posted November 11, 2016 Netduma Staff Share Posted November 11, 2016 Try following this guide http://support.netduma.com/support/solutions/articles/16000022359-how-do-i-open-my-nat-as well as the advice above. Let us know if that fixes your problem Link to comment Share on other sites More sharing options...
toby jugs Posted November 11, 2016 Author Share Posted November 11, 2016 i got type 2 from testing the ps4 connection I assume this is ok? i'd like to get it open again as it was before on my old ps4 , which i didn't have to eff about with. i don't understand the guide at all and there's many conflicting things on google aswell Link to comment Share on other sites More sharing options...
RADDY1993 Posted November 11, 2016 Share Posted November 11, 2016 i got type 2 from testing the ps4 connection I assume this is ok? i'd like to get it open again as it was before on my old ps4 , which i didn't have to eff about with. i don't understand the guide at all and there's many conflicting things on google aswell Port forward 3074 UDP/TCP that solved mine Link to comment Share on other sites More sharing options...
toby jugs Posted November 11, 2016 Author Share Posted November 11, 2016 Port forward 3074 UDP/TCP that solved mine how do i do that raddy Link to comment Share on other sites More sharing options...
Toe_SNE Posted November 11, 2016 Share Posted November 11, 2016 how do i do that raddy Follow this guide mate. It didn't matter what I tried I could not get an open NAT on multiple consoles until I followed sims guide. Since I followed it, my 360, XBOX One & ps4 have all had an open NAT. It's crucial for pulling host on the older CoD titles so It's been a blessing. Link to comment Share on other sites More sharing options...
toby jugs Posted November 11, 2016 Author Share Posted November 11, 2016 thanks,i'll check it out in the morning Link to comment Share on other sites More sharing options...
bagsta69 Posted November 12, 2016 Share Posted November 12, 2016 This is a guide I did for blops 3 but I am sure the ports are pretty much the same. Ill have a google in a bit and find out which specific ones are for IW. For now you can just do this method for the port 3074 as Raddy mentioned. http://forum.netduma.com/topic/15763-port-forward-for-blops3-on-ps4/ The sim video makes you rebuild database and all that which you do not need to do as your pro is brand new. Simply forward the ports in the next post and you should be good. Link to comment Share on other sites More sharing options...
bagsta69 Posted November 12, 2016 Share Posted November 12, 2016 OK so if you follow this guide to get a static IP address http://forum.netduma.com/topic/15763-port-forward-for-blops3-on-ps4/and then forward these ports for IW TCP 80, 443,1935,3480 TCP and UDP 3478-3479, 3074, 3075, 3076 Link to comment Share on other sites More sharing options...
toby jugs Posted November 12, 2016 Author Share Posted November 12, 2016 Bags that's nailed it, I appreciate your time and effort and also everyone else's who have replied to this thread. this issue is solved now , phew! Link to comment Share on other sites More sharing options...
bagsta69 Posted November 12, 2016 Share Posted November 12, 2016 Fantastic mate, I'll mark as solved cheers buddy Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.