Jump to content
Reminder, starting today you will no longer be able to login to the forum using your display name, to login you must now use your email address. ×

Gaming profiles


Recommended Posts

YES, that's correct

  • Set your speeds to 315/9.99. that should get your buffer-boat under control.
  • Anti-flood download 32% has been the magic number for me.
  • Anti-flood upload 87%
I feel you don't need all that speeds, if all you got is your PS4 and a laptop on the netduma, I would reduce it, you will have better control over your network settings. If you want a profile done let me know .

 

Thanks for replying buddy, your recommendations a+ my buffer bloat! I was still getting melted until I unticked share excess on the upload side. That did the trick, thanks again bro!
Link to comment
Share on other sites

  • Replies 116
  • Created
  • Last Reply

Thanks for replying buddy, your recommendations a+ my buffer bloat! I was still getting melted until I unticked share excess on the upload side. That did the trick, thanks again bro!

On share excess on the up load ( only ), untick it just like you did and set it for 2%. If your in a party than raise it up to 4%.

Link to comment
Share on other sites

  • 3 weeks later...

Hello, AnnonymousS, so basically throttling is the way to fight lag comp? I have 100 up and 100 down any suggestions. Please

Yes that's right , I dont have 100 upload so I cant really test for that but I would start by setting your Bandwidth at 83/11.49 . Run DSL REPORT adjust your Congestion Control % down on your Download only until you get an A+, A+ B or an A for speed. This all matters how many devices is on your R1 network . What is your set up?  

post-194-0-52337000-1463794280_thumb.png

post-194-0-93351300-1463794293_thumb.png

post-194-0-98578100-1463794305_thumb.png

post-194-0-85960500-1463794633_thumb.png

Link to comment
Share on other sites

Hi Annonymous,

 

Can you help with my setting.

 

I have 100 Down and 40 Upload. I am just using Netduma R1 and everything(6 devices) are connected to that.

 

I am in Australia.

 

Thanks in advance.

 
Link to comment
Share on other sites

 

Hi Annonymous,

 

Can you help with my setting.

 

I have 100 Down and 40 Upload. I am just using Netduma R1 and everything(6 devices) are connected to that.

 

I am in Australia.

 

Thanks in advance.

 

 

send me a speed test and a buffer-bloat test.

Link to comment
Share on other sites

If your running at 100% why are your speeds not at 100%

Something is wrong with your setting. I can help you with the lag/comp but if your not set up right then it wont help at all. Send me a pic of your Miscellaneous, geo, bandwidth and lan settings.

Link to comment
Share on other sites

  • Administrators

  • Reactive Algorithm
  • 100% anti-flood
  • Share excess enabled
  • Reset device prioritisation & apply
  • Disable IPv6 in WAN, LAN & misc
  • Disable deep packet in misc
  • Enable turbo mode
  • Ensure the ethernet cables you're using connecting the R1 to hub & R1 to PC are Cat5e+/can handle your speeds.
  • Do a wired speed test from a PC
Link to comment
Share on other sites

Firepanda and Ramakant I will make a profile for you guys today to try out. Just like Fraser said make sure you guys have those settings in place to get your full speeds.

Link to comment
Share on other sites

Hi AnnonymousS, i had tested with 83/11.49 but its not better. Have you idea for my set up for delete lag compensation?

  • RUN DNS TEST https://www.grc.com/dns/benchmark.htmtakes about 30mins (test)
  • Find a good DNS and use that to your home modem and to your NetDuma... LAN and WAN settings
  • Install Ping-plotter its free https://www.pingplotter.com/and test after you find a good DNS
  • Place your Home location where you are finding good pings and game play

Firepanda.Lagcomp.json

post-194-0-56523000-1464398223_thumb.png

Link to comment
Share on other sites

@Annonymous i just did speed test in dslreports i got this speed.

 

41 down and 34 upload, my bufferbloat is A , quality A and speed C.

 

This test done when antiflood was 100% for both

  • RUN DNS TEST https://www.grc.com/dns/benchmark.htmtakes about 30mins (test)
  • Find a good DNS and use that to your home modem and to your NetDuma... LAN and WAN settings
  • Install Ping-plotter its free https://www.pingplotter.com/and test after you find a good DNS
  • Place your Home location where you are finding good pings and game play

Ramakant.Lagcomp.json

post-194-0-32440100-1464398257_thumb.png

Link to comment
Share on other sites

Elrey, here is your Lag/comp settings.

 

  • RUN DNS TEST https://www.grc.com/dns/benchmark.htmtakes about 30mins (test)
  • Find a good DNS and use that to your home modem and to your NetDuma... LAN and WAN settings
  • Install Ping-plotter its free https://www.pingplotter.com/and test after you find a good DNS
  • Place your Home location where you are finding good pings and game play

post-194-0-88095600-1464434260_thumb.png

elrey.lagcomp.json

Link to comment
Share on other sites

AnnonymouS, I have taken some screenshots of my current settings for you to use as a baseline. If you could create a lag comp profile I could use I'd really appreciate it. I've tried to create one myself and use some you have tailored for other people but they haven't worked out. 

 

 

Buffer bloat & Speedtest.net:  http://www.speedtest.net/result/5375591537.png https://i.gyazo.com/c93e132da2323e9eb583ed92ef888348.png"

 

Miscellaneous settings: post-1912-0-99354700-1465026036_thumb.png  post-1912-0-78972700-1465026035_thumb.png

 

Geo-flter page: post-1912-0-96811900-1465026030_thumb.png post-1912-0-39491800-1465026032_thumb.png

 

Bandwidth/ Congestion Control: post-1912-0-14424600-1465026027_thumb.png  post-1912-0-99931600-1465026028_thumb.png  

Lan Settings: post-1912-0-44083400-1465026034_thumb.png  post-1912-0-20707100-1465026035_thumb.png

 

Thanks mate.

Link to comment
Share on other sites

  • 2 months later...

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...