billcline Posted January 27, 2016 Share Posted January 27, 2016 I have been through forums and wiki. I am trying to setup my static and dmz for my ps4. I have my ps4 wired to netduma to time warner modem. Link to comment Share on other sites More sharing options...
e38BimmerFN Posted January 27, 2016 Share Posted January 27, 2016 You need to set up a reserved IP address for yoru PS console on the R1 and remove any static IP addresses on the console. The R1 does not have a DMZ. The handling of the console via it's Reserved IP address is done thru the Geo-Filter and uPnP. Ensure uPnP is enabled on the R1. Link to comment Share on other sites More sharing options...
Asentrix Posted January 27, 2016 Share Posted January 27, 2016 All you need to do is get your WAN IP from here - Click Me! Once you have that , click 'View other router interface' and find the DMZ settings on your other device, then enter the WAN IP from earlier Link to comment Share on other sites More sharing options...
billcline Posted January 27, 2016 Author Share Posted January 27, 2016 All you need to do is get your WAN IP from here - Click Me! Once you have that , click 'View other router interface' and find the DMZ settings on your other device, then enter the WAN IP from earlier where is "view other router interface"? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted January 27, 2016 Administrators Share Posted January 27, 2016 where is "view other router interface"? You should see a blue box on the device manager page. If you don't see this then you have a modem and therefore do not need to do anything relating to DMZ. To set a static IP for your console on the R1 go to settings > DHCP lease and click reserve for the PS4 and enter a number between 100-250. Link to comment Share on other sites More sharing options...
billcline Posted January 27, 2016 Author Share Posted January 27, 2016 You should see a blue box on the device manager page. If you don't see this then you have a modem and therefore do not need to do anything relating to DMZ. To set a static IP for your console on the R1 go to settings > DHCP lease and click reserve for the PS4 and enter a number between 100-250. is it the same number as the ip of the playstation? Link to comment Share on other sites More sharing options...
billcline Posted January 29, 2016 Author Share Posted January 29, 2016 bump Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted January 29, 2016 Administrators Share Posted January 29, 2016 is it the same number as the ip of the playstation? The WAN IP shown on device manager? No it won't be the same Link to comment Share on other sites More sharing options...
billcline Posted January 31, 2016 Author Share Posted January 31, 2016 The WAN IP shown on device manager? No it won't be the same the reserve dchp number....do i set it the same as my ps4 ip address? Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 1, 2016 Administrators Share Posted February 1, 2016 the reserve dchp number....do i set it the same as my ps4 ip address? You can set it as that if you want it to keep it the same but it doesn't need to be the same. Link to comment Share on other sites More sharing options...
billcline Posted February 2, 2016 Author Share Posted February 2, 2016 ok thanks Link to comment Share on other sites More sharing options...
Administrators Netduma Fraser Posted February 2, 2016 Administrators Share Posted February 2, 2016 As your original question seems to have been answered I'll close the thread. Feel free to open another if needed. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.