bayleeshymko

As I said in your other thread, I would highly recommend calling your ISP and asking them to verify the bridge mode was done correctly. If anything, have them reset your equipment to stock settings and then do the bridge and verify which port your R3 needs to go into. I would also make sure it isn't like AT&T with their IP Passthrough where you need to set the MAC of the device to clone to or takeover routing. What @Netduma Fraser said is true, anytime you go through a router you're going to lose some speed, especially devices that aren't super beefy like Prosumer equipment. I would also run a download with your console or pc and see if you hit higher than the speed tests are showing as then you would test against a CDN which would saturate your connection.

You don't have to bypass the ONT/modem, this is the normal setup for most people

There is a known issue with bridge mode and trying to use the 10g port, make sure your only using lan 1 port when using bridge mode on your device 

Mine cant just based off of where i am located they only provide the box i have. i messaged fraser for refund and return. if you guys ever need another tech support worker i feel as i could help. i love your products but looks as i cant use them in canada where i live anyways for now.

I have completely put my isp modem/gateway fiber box into bridge mode. on the modem on bridge mode i get 2 ping 957 download and 955 upload. i plug into my R3 and i got 8 ping, 822 download and 757 upload. i asked last week to return this product and get my money back and they didnt help me at all. 

Every ISP is different.. but you have to sacrifice speed for better bufferbloat. I would suggest testing your throughput with smart boost disabled, this will disable congestion control. Hopefully you will see your full speeds. But with smart boost / congestion control you will not see 950/950. I have google fiber and I’m only able to get 900/900 with smart boost and congestion control enabled.

i run every test on ookla to keep it consistent. what im gonna do tonight when i get home is reset everything. redo all the settings on the mode to bridge it again. run speedtests to see speeds. reconnect the r3, test speeds again to see what the issue is