Armand

@Netduma Fraser Hello, if you have the opportunity, can you send it to me as well early access please. 

Make a new topic with as many details as possible and we can help you there

You're not going to get the same ping to any servers as anyone else - it's dependent on your location/ISP routing in relation to the game server. You've disabled all the features that would help you!

We don't give out any ETAs, the next update will have a lot of fixes that's why its taking longer. In the meantime best to adjust Congestion Control manually in Ping Optimizer > Advanced.

😆 Wasn't trying to get everybody in a tizzy.
Wanted to make sure everyone knew how to go through the update process. Especially because this is the first big push of the year. 
When the update shows up for you guys be sure to factory reset when you're done. I know going back to complex setups with multiple devices can be a bit of a headache. Just make sure you do that before reporting any bugs. 
Thanks
Scott

Hi all, 
I just wanted to post to say I got the Netduma R3 last week and I was still struggling with the hit registration of shots in MWIII as of yesterday.
I saw a post today by @Spritekid242and since I've changed settings a bit it's a night and day difference so big thanks to him. 
I've never used a Netduma router so I am no expert but this seems to work for me. 
My current setup
Geo filter simple instead of custom. For whatever reason the geofenced points didn't seem to work as well for me.
I play on Xbox so I added that in as a device
Steady ping on simple mode
Geo assist on
Ping assist off 
Strict mode on
Fast search off
Smart boost
Gaming top priority and device Xbox top priority also 
 
This is the part that I believe made the biggest difference as suggested on the post by Spritekid242. I'm not sure if it is the bandwidth reservation or the congestion control but these are the two settings I changed today. 
Bandwidth reservation on smart boost set to max 20mbps upload and download for all ports TCP / UDP for Xbox only 

 
This part will be depend on your connection, I recommend to manually set these as when it found the down / up manually it was at like 98% down and 99% and wasn't stable on a bufferbloat test

 
To find the manual numbers I just 
Set congestion control mode to always on and deselected speed test bypass.
Then adjust the sliders down around 5% at a time until you get 0ms on download active and upload active latency on the waveform.com bufferbloat test. I was actively watching these to see if they actually raised above 0ms on the test. One thing I noticed is that I would still get an A+ on the waveform bufferbloat test even if it fluctuated and went back to 0ms. I think it's better for it to never go above 0ms. 
You will also see the max latency ms figures go lower as you bring the percentage down. You will get to a point where is stays at 0ms and the max latency won't get any lower. I did download first. Then I moved on to upload and I settled at 70% down 75% up and turned the speed test bypass back on and set it back to auto from always on. 

Ad blocker on although shouldn't make a difference
DumaOS 4.0.23
Im hoping the automatic congestion control figures will improve in a later firmware so there isn't as much trial and error but all in all the router is a huge improvement from my ISP provided router so far, definitely. Hopefully someone from Netduma can chime in on the Bandwidth reservation, maybe it could be laid out a bit easier for new users to activate if it is in fact a game changer. 

If you copy and paste the password it will not work. You have to type the password manually. I was copy-pasting too and it didn't work. When I typed the password directly, it connected. I hope it works.

Ita hapen me to same problem

I understood thnx, that is, I have manually transferred all the devices to R3 and I have an open nat. 

Mostly it's to ensure an Open NAT for gaming when connected to the R3. Also it ensures all traffic is passed directly to the R3 which allows it to then control your network better and give you a better experience. I suppose the cons are you wouldn't be able to use the ISP modem/router for anything else.

Hi, I'm one of the backend developers.
This issue was causing small latency spikes of up to 4ms, caused by high CPU usage of the Data Usage Daemon (part of the Network Activity history feature). It's been fixed and now has 0-1% CPU usage all the time. This is coming to the next firmware, most likely next week.
If you're interested in the technical details, the issue was caused by an unneeded system call causing malloc/free for every flow measured.
Thank you for buying the Netduma R3 early!

Thanks a lot @Netduma Fraser

Yes gaming recorded , when i stream video in the interface is written streming and calculated min hours, when i play no data  appear. A its a vizual bug 👍 thnx u

Are you seeing gaming recorded on the actual SmartBOOST page? If so it's just a visual bug on the dashboard, we'll be resolving that

Mine tags the activity quite accurately for PC so far. 
 

@ArmandYeah it a bug being worked upon